В наличии!
Предлагаем со склада в Алматы (ссылки):
|
Профессиональные pH-электроды
Самые популярные электроды МЕТТЛЕР ТОЛЕДО.
- Открытая диафрагма
- Полимерный корпус у электродов Expert
- Стеклянный корпус у электродов Power
- Полимерный или гелевый электролит
- Датчик температуры
|
|
InLab® Expert
State of the Art
A versatile, combination pH electrode with S7 screw head. Ideal for a wide range of applications including emulsions, suspensions, effluent water and solutions containing proteins and sulphides.
Технические характеристики - InLab® Expert
|
Диапазон рН |
0 ... 14 |
Температурный диапазон, °C |
0 ... 100 |
Время реакции электрода (98% между рН 4…7) |
< 20 sec. |
Материал корпуса |
PEEK |
Сопротивление мембраны (25°C) |
< 250 MOhm |
Система сравнения |
ARGENTHAL™ |
Электролит электрода сравнения |
XEROLYT® Polymer |
Длина погружной части |
120 mm |
Диаметр погружной части |
12 mm |
Кабели и коннекторы |
S7 |
Тип стекла мембраны |
U |
Долгосрочное хранение |
FRISCOLYT-B® (51350076) in watering cap |
Краткосрочное хранение |
3 mol/L KCl, buffer pH 4 or 7 |
Номер заказа |
51343100 |
Особенности и преимущества
The InLab® Expert electrode has been designed with long life in mind. The fine-pored ceramic junction used in conventional electrodes can easily become contaminated in critical media such as suspensions and wastewater. In contrast the InLab® Expert electrode with a solid polymeric electrolyte requires no junction at all. As a result these sensors are particularly insensitive to contamination. The reference electrode on these sensors is in direct contact with the measured medium by means of two open junctions, hence there is no junction to block. In addition, the high grade plastic (PEEK) shaft offers a high level of chemical resistance and robustness. Service life and measurement accuracy are further improved by the ARGENTHAL™ reference system which reduces loss of silver chloride from the reference wire at differing sample temperatures.
- High grade plastic shaft (PEEK)
- Polymer electrolyte XEROLYT®
- Open junction
- ARGENTHAL™ reference
|
|
InLab® Expert Pro
State of the Ar
A versatile, combination pH electrode with integrated temperature sensor and fixed cable with BNC/Cinch (RCA) connector. Ideal for a wide range of applications including emulsions, suspensions, effluent water and solutions containing proteins and sulphides.
Технические характеристики - InLab® Expert Pro
|
Диапазон рН |
0 ... 14 |
Температурный диапазон, °C |
0 ... 100 |
Время реакции электрода (98% между рН 4…7) |
< 20 sec. |
Материал корпуса |
PEEK |
Сопротивление мембраны (25°C) |
< 250 MOhm |
Датчик температуры |
NTC 30 kOhm |
Система сравнения |
ARGENTHAL™ |
Электролит электрода сравнения |
XEROLYT® Polymer |
Длина погружной части |
120 mm |
Диаметр погружной части |
12 mm |
Кабели и коннекторы |
1.2 m, BNC/RCA (Cinch) |
Тип стекла мембраны |
U |
Долгосрочное хранение |
FRISCOLYT-B® (51350076) in watering cap |
Краткосрочное хранение |
3 mol/L KCl, buffer pH 4 or 7 |
Номер заказа |
51343101 |
Особенности и преимущества
The InLab® Expert Pro electrode has been designed with long life in mind. The fine-pored ceramic junction used in conventional electrodes can easily become contaminated in critical media such as suspensions and wastewater. In contrast the InLab® Expert Pro electrode with a solid polymeric electrolyte requires no junction at all. As a result these sensors are particularly insensitive to contamination. The reference electrode on these sensors is in direct contact with the measured medium by means of two open junctions, hence there is no junction to block. In addition, the high grade plastic (PEEK) shaft offers a high level of chemical resistance and robustness. Service life and measurement accuracy are further improved by the ARGENTHAL™ reference system which reduces loss of silver chloride from the reference wire at differing sample temperatures.
- High grade plastic shaft (PEEK)
- Polymer electrolyte XEROLYT®
- Open junction
- ARGENTHAL™ reference
- Integrated temperature sensor
|
|
InLab® Expert 2m
State of the Art
A versatile, combination pH electrode with integrated temperature sensor and fixed cable with BNC/Cinch (RCA) connector. Ideal for a wide range of applications including emulsions, suspensions, effluent water and solutions containing proteins and sulphides.
Технические характеристики - InLab® Expert 2m
|
Диапазон рН |
0 ... 14 |
Температурный диапазон, °C |
0 ... 100 |
Время реакции электрода (98% между рН 4…7) |
< 20 sec. |
Материал корпуса |
PEEK |
Сопротивление мембраны (25°C) |
< 250 MOhm |
Датчик температуры |
NTC 30 kOhm |
Система сравнения |
ARGENTHAL™ |
Электролит электрода сравнения |
XEROLYT® Polymer |
Длина погружной части |
120 mm |
Диаметр погружной части |
12 mm |
Кабели и коннекторы |
2 m, BNC/RCA (Cinch) |
Тип стекла мембраны |
U |
Долгосрочное хранение |
FRISCOLYT-B® (51350076) in watering cap |
Краткосрочное хранение |
3 mol/L KCl, buffer pH 4 or 7 |
Номер заказа |
51343102 |
Особенности и преимущества
The InLab® Expert 2m electrode has been designed with long life in mind. The fine-pored ceramic junction used in conventional electrodes can easily become contaminated in critical media such as suspensions and wastewater. In contrast the InLab® Expert 2m electrode with a solid polymeric electrolyte requires no junction at all. As a result these sensors are particularly insensitive to contamination. The reference electrode on these sensors is in direct contact with the measured medium by means of two open junctions, hence there is no junction to block. In addition, the high grade plastic (PEEK) shaft offers a high level of chemical resistance and robustness. Service life and measurement accuracy are further improved by the ARGENTHAL™ reference system which reduces loss of silver chloride from the reference wire at differing sample temperatures.
- High grade plastic shaft (PEEK)
- Polymer electrolyte XEROLYT®
- Open junction
- ARGENTHAL™ reference
- Integrated temperature sensor
|
|
InLab® Expert Pro-ISM
State of the Art
A versatile, combination pH electrode with integrated temperature sensor and fixed cable with BNC/Cinch (RCA) connector. Ideal for a wide range of applications including emulsions, suspensions, effluent water and solutions containing proteins and sulphides.
Технические характеристики - InLab® Expert Pro-ISM
|
Краткое описание |
built for SevenCompact™ 220, SevenGo Duo pro™ SG68, SG78 and SG98 and SevenGo Duo™ SG23 |
Диапазон рН |
0 ... 14 |
Температурный диапазон, °C |
0 ... 100 |
Время реакции электрода (98% между рН 4…7) |
< 20 sec. |
Материал корпуса |
PEEK |
Сопротивление мембраны (25°C) |
< 250 MOhm |
Датчик температуры |
NTC 30 kOhm |
Система сравнения |
ARGENTHAL™ |
Электролит электрода сравнения |
XEROLYT® Polymer |
Длина погружной части |
120 mm |
Диаметр погружной части |
12 mm |
Кабели и коннекторы |
1.2 m cable, BNC/RCA (Cinch) |
Тип стекла мембраны |
U |
Долгосрочное хранение |
FRISCOLYT-B® (51350076) in watering cap |
Краткосрочное хранение |
3 mol/L KCl, buffer pH 4 or 7 |
Номер заказа |
30014096 |
Особенности и преимущества
The InLab® Expert Pro-ISM electrode has been designed with long life in mind. The fine-pored ceramic junction used in conventional electrodes can easily become contaminated in critical media such as suspensions and wastewater. In contrast the InLab® Expert Pro-ISM electrode with a solid polymeric electrolyte requires no junction at all. As a result these sensors are particularly insensitive to contamination. The reference electrode on these sensors is in direct contact with the measured medium by means of two open junctions, hence there is no junction to block. In addition, the high grade plastic (PEEK) shaft offers a high level of chemical resistance and robustness. Service life and measurement accuracy are further improved by the ARGENTHAL™ reference system which reduces loss of silver chloride from the reference wire at differing sample temperatures. The METTLER TOLEDO meters have the ability to automatically recognize ISM sensors upon connection, transfer calibration data to and from the sensor etc.
- Intelligent sensor management (ISM®)
- High grade plastic shaft (PEEK)
- Polymer electrolyte XEROLYT®
- Open junction
- ARGENTHAL™ reference
- Integrated temperature sensor
|
|
InLab® Expert DIN
State of the Art
A versatile, combination pH electrode with integrated Pt1000 temperature sensor and fixed cable with DIN19262/4mm banana connector. Ideal for a wide range of applications including emulsions, suspensions, effluent water and solutions containing proteins and sulphides.
Технические характеристики - InLab® Expert DIN
|
Диапазон рН |
0 ... 14 |
Температурный диапазон, °C |
0 ... 100 |
Время реакции электрода (98% между рН 4…7) |
< 20 sec. |
Материал корпуса |
PEEK |
Сопротивление мембраны (25°C) |
< 250 MOhm |
Датчик температуры |
Pt1000 |
Система сравнения |
ARGENTHAL™ |
Электролит электрода сравнения |
XEROLYT® Polymer |
Длина погружной части |
120 mm |
Диаметр погружной части |
12 mm |
Кабели и коннекторы |
1.2 m, DIN 19262 / 4 mm banana |
Тип стекла мембраны |
U |
Долгосрочное хранение |
FRISCOLYT-B® (51350076) in watering cap |
Краткосрочное хранение |
3 mol/L KCl, buffer pH 4 or 7 |
Номер заказа |
51343103 |
Особенности и преимущества
The InLab® Expert DIN electrode has been designed with long life in mind. The fine-pored ceramic junction used in conventional electrodes can easily become contaminated in critical media such as suspensions and wastewater. In contrast the InLab® Expert DIN electrode with a solid polymeric electrolyte requires no junction at all. As a result these sensors are particularly insensitive to contamination. The reference electrode on these sensors is in direct contact with the measured medium by means of two open junctions, hence there is no junction to block. In addition, the high grade plastic (PEEK) shaft offers a high level of chemical resistance and robustness. Service life and measurement accuracy are further improved by the ARGENTHAL™ reference system which reduces loss of silver chloride from the reference wire at differing sample temperatures.
- High grade plastic shaft (PEEK)
- Polymer electrolyte XEROLYT®
- Open junction
- ARGENTHAL™ reference
- Integrated temperature sensor
|
|
InLab® Expert NTC30
State of the Art
A versatile, combination pH electrode with integrated temperature sensor and MultiPin™ head. Ideal for a wide range of applications including emulsions, suspensions, effluent water and solutions containing proteins and sulphides.
Технические характеристики - InLab® Expert NTC30
|
Диапазон рН |
0 ... 14 |
Температурный диапазон, °C |
0 ... 100 |
Время реакции электрода (98% между рН 4…7) |
< 20 sec. |
Материал корпуса |
PEEK |
Сопротивление мембраны (25°C) |
< 250 MOhm |
Датчик температуры |
NTC 30 kOhm |
Система сравнения |
ARGENTHAL™ |
Электролит электрода сравнения |
XEROLYT® Polymer |
Длина погружной части |
120 mm |
Диаметр погружной части |
12 mm |
Кабели и коннекторы |
MultiPin™ |
Тип стекла мембраны |
U |
Долгосрочное хранение |
FRISCOLYT-B® (51350076) in watering cap |
Краткосрочное хранение |
3 mol/L KCl, buffer pH 4 or 7 |
Номер заказа |
51343104 |
Особенности и преимущества
The InLab® Expert NTC30 electrode has been designed with long life in mind. The fine-pored ceramic junction used in conventional electrodes can easily become contaminated in critical media such as suspensions and wastewater. In contrast the InLab® Expert NTC30 electrode with a solid polymeric electrolyte requires no junction at all. As a result these sensors are particularly insensitive to contamination. The reference electrode on these sensors is in direct contact with the measured medium by means of two open junctions, hence there is no junction to block. In addition, the high grade plastic (PEEK) shaft offers a high level of chemical resistance and robustness. Service life and measurement accuracy are further improved by the ARGENTHAL™ reference system which reduces loss of silver chloride from the reference wire at differing sample temperatures. Different cables can be connected to the MultiPin™ head allowing use with a wide range of meters.
- High grade plastic shaft (PEEK)
- Polymer electrolyte XEROLYT®
- Open junction
- ARGENTHAL™ reference
- Integrated NTC 30 kΩ temperature sensor
|
|
InLab® Expert NTC30 + DIN/RCA (Cinch) cable
State of the Art
A versatile, combination pH electrode with integrated temperature sensor and MultiPin™ head. Ideal for a wide range of applications including emulsions, suspensions, effluent water and solutions containing proteins and sulphides.
Технические характеристики - InLab® Expert NTC30 + DIN/RCA (Cinch) cable
|
Диапазон рН |
0 ... 14 |
Температурный диапазон, °C |
0 ... 100 |
Время реакции электрода (98% между рН 4…7) |
< 20 sec. |
Материал корпуса |
PEEK |
Сопротивление мембраны (25°C) |
< 250 MOhm |
Датчик температуры |
NTC 30 kOhm |
Система сравнения |
ARGENTHAL™ |
Электролит электрода сравнения |
XEROLYT® Polymer |
Длина погружной части |
120 mm |
Диаметр погружной части |
12 mm |
Кабели и коннекторы |
MultiPin™ |
Тип стекла мембраны |
U |
Долгосрочное хранение |
FRISCOLYT-B® (51350076) in watering cap |
Краткосрочное хранение |
3 mol/L KCl, buffer pH 4 or 7 |
Особенности и преимущества
The InLab® Expert NTC30 electrode has been designed with long life in mind. The fine-pored ceramic junction used in conventional electrodes can easily become contaminated in critical media such as suspensions and wastewater. In contrast the InLab® Expert NTC30 electrode with a solid polymeric electrolyte requires no junction at all. As a result these sensors are particularly insensitive to contamination. The reference electrode on these sensors is in direct contact with the measured medium by means of two open junctions, hence there is no junction to block. In addition, the high grade plastic (PEEK) shaft offers a high level of chemical resistance and robustness. Service life and measurement accuracy are further improved by the ARGENTHAL™ reference system which reduces loss of silver chloride from the reference wire at differing sample temperatures. Different cables can be connected to the MultiPin™ head allowing use with a wide range of meters.
- High grade plastic shaft (PEEK)
- Polymer electrolyte XEROLYT®
- Open junction
- ARGENTHAL™ reference
- Integrated NTC 30 kΩ temperature sensor
|
|
InLab® Expert Pt1000
State of the Art
A versatile, combination pH electrode with integrated Pt1000 temperature sensor and MultiPin™ head. Ideal for a wide range of applications including emulsions, suspensions, effluent water and solutions containing proteins and sulphides.
Технические характеристики - InLab® Expert Pt1000
|
Диапазон рН |
0 ... 14 |
Температурный диапазон, °C |
0 ... 100 |
Время реакции электрода (98% между рН 4…7) |
< 20 sec. |
Материал корпуса |
PEEK |
Сопротивление мембраны (25°C) |
< 250 MOhm |
Датчик температуры |
Pt1000 |
Система сравнения |
ARGENTHAL™ |
Электролит электрода сравнения |
XEROLYT® Polymer |
Длина погружной части |
120 mm |
Диаметр погружной части |
12 mm |
Кабели и коннекторы |
MultiPin™ |
Тип стекла мембраны |
U |
Долгосрочное хранение |
FRISCOLYT-B® (51350076) in watering cap |
Краткосрочное хранение |
3 mol/L KCl, buffer pH 4 or 7 |
Номер заказа |
51343105 |
Особенности и преимущества
The InLab® Expert Pt1000 electrode has been designed with long life in mind. The fine-pored ceramic junction used in conventional electrodes can easily become contaminated in critical media such as suspensions and wastewater. In contrast the InLab® Expert Pt1000 electrode with a solid polymeric electrolyte requires no junction at all. As a result these sensors are particularly insensitive to contamination. The reference electrode on these sensors is in direct contact with the measured medium by means of two open junctions, hence there is no junction to block. In addition, the high grade plastic (PEEK) shaft offers a high level of chemical resistance and robustness. Service life and measurement accuracy are further improved by the ARGENTHAL™ reference system which reduces loss of silver chloride from the reference wire at differing sample temperatures. Different cables can be connected to the MultiPin™ head allowing use with a wide range of meters.
- High grade plastic shaft (PEEK)
- Polymer electrolyte XEROLYT®
- Open junction
- ARGENTHAL™ reference
- Integrated Pt1000 temperature sensor
|
|
InLab® Expert Pro-ISM-IP67
State of the Art
A versatile, combination pH electrode with integrated temperature sensor and fixed cable with BNC/Cinch (RCA) connector. Ideal for a wide range of applications including emulsions, suspensions, effluent water and solutions containing proteins and sulphides. Designed for use with METTLER TOLEDO portable meters SevenGo Duo™ (SG23) and SevenGo Duo pro™ (SG68, SG78 and SG98) only.
Технические характеристики - InLab® Expert Pro-ISM-IP67
|
Краткое описание |
built for SevenGo Duo™ SG23 and SevenGo Duo pro™ SG68, SG78 and SG98 |
Диапазон рН |
0 ... 14 |
Температурный диапазон, °C |
0 ... 100 |
Время реакции электрода (98% между рН 4…7) |
< 20 sec. |
Материал корпуса |
PEEK |
Сопротивление мембраны (25°C) |
< 250 MOhm |
Датчик температуры |
NTC 30 kOhm |
Система сравнения |
ARGENTHAL™ |
Электролит электрода сравнения |
XEROLYT® Polymer |
Длина погружной части |
120 mm |
Диаметр погружной части |
12 mm |
Кабели и коннекторы |
1.8 m cable, BNC/RCA (Cinch) |
Тип стекла мембраны |
U |
Долгосрочное хранение |
FRISCOLYT-B® (51350076) in watering cap |
Краткосрочное хранение |
3 mol/L KCl, buffer pH 4 or 7 |
Номер заказа |
51344102 |
Особенности и преимущества
The InLab® Expert Pro-ISM-IP67 electrode has been designed with long life in mind. The fine-pored ceramic junction used in conventional electrodes can easily become contaminated in critical media such as suspensions and wastewater. In contrast the InLab® Expert Pro-ISM-IP67 electrode with a solid polymeric electrolyte requires no junction at all. As a result these sensors are particularly insensitive to contamination. The reference electrode on these sensors is in direct contact with the measured medium by means of two open junctions, hence there is no junction to block. In addition, the high grade plastic (PEEK) shaft offers a high level of chemical resistance and robustness. Service life and measurement accuracy are further improved by the ARGENTHAL™ reference system which reduces loss of silver chloride from the reference wire at differing sample temperatures. The METTLER TOLEDO dual channel portable meters SevenGo Duo™ SG23 and SevenGo Duo pro™ SG68, SG78 and SG98 have the ability to automatically recognize ISM sensors upon connection, transfer calibration data to and from the sensor etc.
- Intelligent sensor management (ISM®)
- High grade plastic shaft (PEEK)
- Polymer electrolyte XEROLYT®
- Open junction
- ARGENTHAL™ reference
- Integrated temperature sensor
|
|
InLab® Expert Pro ISM-5m
State of the Art
A versatile, combination pH electrode with integrated temperature sensor and fixed cable with BNC/Cinch (RCA) connector. Ideal for a wide range of applications including emulsions, suspensions, effluent water and solutions containing proteins and sulphides.
Технические характеристики - InLab® Expert Pro ISM-5m
|
Краткое описание |
built for SevenGo Duo™ SG23 and SevenGo Duo pro™ SG68 and SG78 |
Диапазон рН |
0 ... 14 |
Температурный диапазон, °C |
0 ... 100 |
Время реакции электрода (98% между рН 4…7) |
< 20 sec. |
Материал корпуса |
PEEK |
Сопротивление мембраны (25°C) |
< 250 MOhm |
Датчик температуры |
NTC 30 kOhm |
Система сравнения |
ARGENTHAL™ |
Электролит электрода сравнения |
XEROLYT® Polymer |
Длина погружной части |
120 mm |
Диаметр погружной части |
12 mm |
Кабели и коннекторы |
5 m cable, BNC/RCA (Cinch) |
Тип стекла мембраны |
U |
Долгосрочное хранение |
FRISCOLYT-B® (51350076) in watering cap |
Краткосрочное хранение |
3 mol/L KCl, buffer pH 4 or 7 |
Номер заказа |
51344103 |
Особенности и преимущества
The InLab® Expert Pro ISM-5m electrode has been designed with long life in mind. The fine-pored ceramic junction used in conventional electrodes can easily become contaminated in critical media such as suspensions and wastewater. In contrast the InLab® Expert Pro ISM-5m electrode with a solid polymeric electrolyte requires no junction at all. As a result these sensors are particularly insensitive to contamination. The reference electrode on these sensors is in direct contact with the measured medium by means of two open junctions, hence there is no junction to block. In addition, the high grade plastic (PEEK) shaft offers a high level of chemical resistance and robustness. Service life and measurement accuracy are further improved by the ARGENTHAL™ reference system which reduces loss of silver chloride from the reference wire at differing sample temperatures. The METTLER TOLEDO meters have the ability to automatically recognize ISM sensors upon connection, transfer calibration data to and from the sensor etc.
- Intelligent sensor management (ISM®)
- High grade plastic shaft (PEEK)
- Polymer electrolyte XEROLYT®
- Open junction
- ARGENTHAL™ reference
- Integrated temperature sensor
|
|
InLab® Expert Pro ISM-10m
State of the Art
A versatile, combination pH electrode with integrated temperature sensor and fixed cable with BNC/Cinch (RCA) connector. Ideal for a wide range of applications including emulsions, suspensions, effluent water and solutions containing proteins and sulphides.
Технические характеристики - InLab® Expert Pro ISM-10m
|
Краткое описание |
built for SevenGo Duo™ SG23 and SevenGo Duo pro™ SG68 and SG78 |
Диапазон рН |
0 ... 14 |
Температурный диапазон, °C |
0 ... 100 |
Время реакции электрода (98% между рН 4…7) |
< 20 sec. |
Материал корпуса |
PEEK |
Сопротивление мембраны (25°C) |
< 250 MOhm |
Датчик температуры |
NTC 30 kOhm |
Система сравнения |
ARGENTHAL™ |
Электролит электрода сравнения |
XEROLYT® Polymer |
Длина погружной части |
120 mm |
Диаметр погружной части |
12 mm |
Кабели и коннекторы |
10 m cable, BNC/RCA (Cinch) |
Тип стекла мембраны |
U |
Долгосрочное хранение |
FRISCOLYT-B® (51350076) in watering cap |
Краткосрочное хранение |
3 mol/L KCl, buffer pH 4 or 7 |
Номер заказа |
51344104 |
Особенности и преимущества
The InLab® Expert Pro ISM-10m electrode has been designed with long life in mind. The fine-pored ceramic junction used in conventional electrodes can easily become contaminated in critical media such as suspensions and wastewater. In contrast the InLab® Expert Pro ISM-10m electrode with a solid polymeric electrolyte requires no junction at all. As a result these sensors are particularly insensitive to contamination. The reference electrode on these sensors is in direct contact with the measured medium by means of two open junctions, hence there is no junction to block. In addition, the high grade plastic (PEEK) shaft offers a high level of chemical resistance and robustness. Service life and measurement accuracy are further improved by the ARGENTHAL™ reference system which reduces loss of silver chloride from the reference wire at differing sample temperatures. The METTLER TOLEDO meters have the ability to automatically recognize ISM sensors upon connection, transfer calibration data to and from the sensor etc. More information regarding ISM®.
- Intelligent sensor management (ISM®)
- High grade plastic shaft (PEEK)
- Polymer electrolyte XEROLYT®
- Open junction
- ARGENTHAL™ reference
- Integrated temperature sensor
|
|
InLab® Expert Pt1000 + BNC/4mm banana cable
State of the Art
A versatile, combination pH electrode with integrated Pt1000 temperature sensor and MultiPin™ head. Ideal for a wide range of applications including emulsions, suspensions, effluent water and solutions containing proteins and sulphides.
Технические характеристики - InLab® Expert Pt1000 + BNC/4mm banana cable
|
Диапазон рН |
0 ... 14 |
Температурный диапазон, °C |
0 ... 100 |
Время реакции электрода (98% между рН 4…7) |
< 20 sec. |
Материал корпуса |
PEEK |
Сопротивление мембраны (25°C) |
< 250 MOhm |
Датчик температуры |
Pt1000 |
Система сравнения |
ARGENTHAL™ |
Электролит электрода сравнения |
XEROLYT® Polymer |
Длина погружной части |
120 mm |
Диаметр погружной части |
12 mm |
Кабели и коннекторы |
MultiPin™ |
Тип стекла мембраны |
U |
Долгосрочное хранение |
FRISCOLYT-B® (51350076) in watering cap |
Краткосрочное хранение |
3 mol/L KCl, buffer pH 4 or 7 |
Номер заказа |
51343105 |
Особенности и преимущества
The InLab® Expert Pt1000 electrode has been designed with long life in mind. The fine-pored ceramic junction used in conventional electrodes can easily become contaminated in critical media such as suspensions and wastewater. In contrast the InLab® Expert Pt1000 electrode with a solid polymeric electrolyte requires no junction at all. As a result these sensors are particularly insensitive to contamination. The reference electrode on these sensors is in direct contact with the measured medium by means of two open junctions, hence there is no junction to block. In addition, the high grade plastic (PEEK) shaft offers a high level of chemical resistance and robustness. Service life and measurement accuracy are further improved by the ARGENTHAL™ reference system which reduces loss of silver chloride from the reference wire at differing sample temperatures. Different cables can be connected to the MultiPin™ head allowing use with a wide range of meters.
- High grade plastic shaft (PEEK)
- Polymer electrolyte XEROLYT®
- Open junction
- ARGENTHAL™ reference
- Integrated Pt1000 temperature sensor
|
|
InLab® 413 SG / Premium 3-in-1 pH Electrode
State of the Art
A versatile, combination pH electrode with integrated temperature sensor and fixed cable with BNC/Cinch (RCA) connector. Ideal for a wide range of applications including emulsions, suspensions, effluent water and solutions containing proteins and sulphides.
Технические характеристики - InLab® 413 SG / Premium 3-in-1 pH Electrode
|
Краткое описание |
Premium 3-in-1 electrode designed for SevenGo™ SG2 and SG8 |
Диапазон рН |
0 ... 14 |
Температурный диапазон, °C |
0 ... 100 |
Время реакции электрода (98% между рН 4…7) |
< 20 sec. |
Материал корпуса |
PEEK |
Сопротивление мембраны (25°C) |
< 250 MOhm |
Датчик температуры |
NTC 30 kOhm |
Система сравнения |
ARGENTHAL™ |
Электролит электрода сравнения |
XEROLYT® Polymer |
Длина погружной части |
120 mm |
Диаметр погружной части |
12 mm |
Кабели и коннекторы |
2 m, BNC/RCA (Cinch) |
Тип стекла мембраны |
U |
Долгосрочное хранение |
FRISCOLYT-B® (51350076) in watering cap |
Краткосрочное хранение |
3 mol/L KCI, buffer pH 4 or 7 |
Номер заказа |
51340288 |
Особенности и преимущества
The InLab® 413 electrode has been designed with long life in mind. The fine-pored ceramic junction used in conventional electrodes can easily become contaminated in critical media such as suspensions and wastewater. In contrast the InLab® 413 electrode with a solid polymeric electrolyte requires no junction at all. As a result these sensors are particularly insensitive to contamination. The reference electrode on these sensors is in direct contact with the measured medium by means of two open junctions, hence there is no junction to block. In addition, the high grade plastic (PEEK) shaft offers a high level of chemical resistance and robustness. Service life and measurement accuracy are further improved by the ARGENTHAL™ reference system which reduces loss of silver chloride from the reference wire at differing sample temperatures.
- High grade plastic shaft (PEEK)
- Polymer electrolyte XEROLYT®
- Open junction
- ARGENTHAL™ reference
- Integrated temperature sensor
|
|
InLab® 413 SG / 5 m Premium 3-in-1 pH Electrode
State of the Art
A versatile, combination pH electrode with integrated temperature sensor and fixed cable with BNC/Cinch (RCA) connector. Ideal for a wide range of applications including emulsions, suspensions, effluent water and solutions containing proteins and sulphides.
Технические характеристики - InLab® 413 SG / 5 m Premium 3-in-1 pH Electrode
|
Краткое описание |
Premium 3-in-1 electrode designed for SevenGo™ SG2 and SG8 |
Диапазон рН |
0 ... 14 |
Температурный диапазон, °C |
0 ... 100 |
Время реакции электрода (98% между рН 4…7) |
< 20 sec. |
Материал корпуса |
PEEK |
Сопротивление мембраны (25°C) |
< 250 MOhm |
Датчик температуры |
NTC 30 kOhm |
Система сравнения |
ARGENTHAL™ |
Электролит электрода сравнения |
XEROLYT® Polymer |
Длина погружной части |
120 mm |
Диаметр погружной части |
12 mm |
Кабели и коннекторы |
5 m, BNC/RCA (Cinch) |
Тип стекла мембраны |
U |
Долгосрочное хранение |
FRISCOLYT-B® (51350076) in watering cap |
Краткосрочное хранение |
3 mol/L KCI, buffer pH 4 or 7 |
Номер заказа |
51340297 |
Особенности и преимущества
The InLab® 413 electrode has been designed with long life in mind. The fine-pored ceramic junction used in conventional electrodes can easily become contaminated in critical media such as suspensions and wastewater. In contrast the InLab® 413 electrode with a solid polymeric electrolyte requires no junction at all. As a result these sensors are particularly insensitive to contamination. The reference electrode on these sensors is in direct contact with the measured medium by means of two open junctions, hence there is no junction to block. In addition, the high grade plastic (PEEK) shaft offers a high level of chemical resistance and robustness. Service life and measurement accuracy are further improved by the ARGENTHAL™ reference system which reduces loss of silver chloride from the reference wire at differing sample temperatures.
- High grade plastic shaft (PEEK)
- Polymer electrolyte XEROLYT®
- Open junction
- ARGENTHAL™ reference
- Integrated temperature sensor
|
|
InLab® 413 SG / 10 m Premium 3-in-1 pH Electrode
State of the Art
A versatile, combination pH electrode with integrated temperature sensor and fixed cable with BNC/Cinch (RCA) connector. Ideal for a wide range of applications including emulsions, suspensions, effluent water and solutions containing proteins and sulphides.
Технические характеристики - InLab® 413 SG / 10 m Premium 3-in-1 pH Electrode
|
Краткое описание |
Premium 3-in-1 electrode designed for SevenGo™ SG2 and SG8 |
Диапазон рН |
0 ... 14 |
Температурный диапазон, °C |
0 ... 100 |
Время реакции электрода (98% между рН 4…7) |
< 20 sec. |
Материал корпуса |
PEEK |
Сопротивление мембраны (25°C) |
< 250 MOhm |
Датчик температуры |
NTC 30 kOhm |
Система сравнения |
ARGENTHAL™ |
Электролит электрода сравнения |
XEROLYT® Polymer |
Длина погружной части |
120 mm |
Диаметр погружной части |
12 mm |
Кабели и коннекторы |
10 m, BNC/RCA (Cinch) |
Тип стекла мембраны |
U |
Долгосрочное хранение |
FRISCOLYT-B® (51350076) in watering cap |
Краткосрочное хранение |
3 mol/L KCI, buffer pH 4 or 7 |
Номер заказа |
51340289 |
Особенности и преимущества
The InLab® 413 electrode has been designed with long life in mind. The fine-pored ceramic junction used in conventional electrodes can easily become contaminated in critical media such as suspensions and wastewater. In contrast the InLab® 413 electrode with a solid polymeric electrolyte requires no junction at all. As a result these sensors are particularly insensitive to contamination. The reference electrode on these sensors is in direct contact with the measured medium by means of two open junctions, hence there is no junction to block. In addition, the high grade plastic (PEEK) shaft offers a high level of chemical resistance and robustness. Service life and measurement accuracy are further improved by the ARGENTHAL™ reference system which reduces loss of silver chloride from the reference wire at differing sample temperatures.
- High grade plastic shaft (PEEK)
- Polymer electrolyte XEROLYT®
- Open junction
- ARGENTHAL™ reference
- Integrated temperature sensor
|
|
InLab® Power
State of the Art
The new InLab® Power is simply brilliant: The SteadyForce™ reference system is under over-pressure, guaranteeing electrolyte discharge. The constant but controlled gradual discharge of electrolyte by the ceramic diaphragm ensures extremely reliable and reproducible results.
Технические характеристики - InLab® Power
|
1Сопротивление мембраны (25°C) |
< 600 MOhm |
Диапазон рН |
0 ... 12 |
Электролит электрода сравнения |
DPA-Gel |
Система сравнения |
SteadyForce™ |
Диаметр погружной части |
12 mm |
Длина погружной части |
120 mm |
Материал корпуса |
Glass |
Температурный диапазон, °C |
0 ... 130 |
Тип стекла мембраны |
A41 |
Кабели и коннекторы |
S7 |
Долгосрочное хранение |
3 mol/L KCl |
Номер заказа |
51343110 |
Особенности и преимущества
At the same time, there is no need to worry about the diaphragm becoming contaminated … the SteadyForce™ system always ensures a connection to the measurement medium! Thanks to InLab® Power you can concentrate on the actual measuring.
- SteadyForce™ reference system
- METTLER TOLEDO A41 glass membrane
|
|
InLab® Power Pro
State of the Art
The new InLab® Power Pro is simply brilliant: The SteadyForce™ reference system is under over-pressure, guaranteeing electrolyte discharge. The constant but controlled gradual discharge of electrolyte by the ceramic diaphragm ensures extremely reliable and reproducible results.
Технические характеристики - InLab® Power Pro
|
Сопротивление мембраны (25°C) |
< 600 MOhm |
Диапазон рН |
0 ... 12 |
Электролит электрода сравнения |
DPA-Gel |
Система сравнения |
SteadyForce™ |
Диаметр погружной части |
12 mm |
Длина погружной части |
170 mm |
Материал корпуса |
Glass |
Температурный диапазон, °C |
0 ... 130 |
Тип стекла мембраны |
A41 |
Кабели и коннекторы |
MultiPin™ |
Долгосрочное хранение |
3 mol/L KCl |
Датчик температуры |
NTC 30 kOhm |
Номер заказа |
51343111 |
Особенности и преимущества
At the same time, there is no need to worry about the diaphragm becoming contaminated …
the SteadyForce™ system always ensures a connection to the measurement medium! Thanks to InLab® Power Pro you can concentrate on the actual measuring.
- Integrated NTC 30 kΩ temperature probe
- METTLER TOLEDO A41 glass membrane
- SteadyForce™ reference system
- Special length of 170 mm
|
|
InLab® Power Pro ISM
State of the Art
The new InLab® Power Pro ISM is simply brilliant: The SteadyForce™ reference system is under over-pressure, guaranteeing electrolyte discharge. The constant but controlled gradual discharge of electrolyte by the ceramic diaphragm ensures extremely reliable and reproducible results.
Технические характеристики - InLab® Power Pro ISM
|
Краткое описание |
built for SevenExcellence™, SevenCompact™ and SevenGo™ (SG23, SG68 and SG78) |
Сопротивление мембраны (25°C) |
< 600 MOhm |
Диапазон рН |
0 ... 12 |
Электролит электрода сравнения |
DPA-Gel |
Система сравнения |
SteadyForce™ |
Диаметр погружной части |
12 mm |
Длина погружной части |
170 mm |
Материал корпуса |
Glass |
Температурный диапазон, °C |
0 ... 130 |
Тип стекла мембраны |
A41 |
Кабели и коннекторы |
MultiPin™ |
Долгосрочное хранение |
3 mol/L KCl |
Датчик температуры |
NTC 30 kOhm |
Номер заказа |
51344211 |
Особенности и преимущества
At the same time, there is no need to worry about the diaphragm becoming contaminated … the SteadyForce™ system always ensures a connection to the measurement medium! Thanks to InLab® Power Pro ISM you can concentrate on the actual measuring. The METTLER TOLEDO meters have the ability to automatically recognize ISM sensors upon connection, transfer calibration data to and from the sensor etc.
- Intelligent sensor management (ISM®)
- Integrated NTC 30 kΩ temperature probe
- METTLER TOLEDO A41 glass membrane
- SteadyForce™ reference system
- Special length of 170 mm
|
|
|