Ионселективные электроды

ISE DX series

     An electrode for determining fluoride concentration in samples such as drinking water, milk, plants and toothpaste

Технические характеристики - DX219-F Fluoride half-cell

The robust solid state membrane and plastic shaft make the fluoride electrode ideal for both field and laboratory applications.

• Solid state membrane
• Rugged plastic shaft

     ISE measurement has never been so simple! The new Click & Clear™ junction of the combined ion-selective electrodes combines three advantages in one tool: The electrolyte solution can flow easily through the junction by pressing the electrode head downwards. This ensures that the junction is optimally cleaned between the measurements and the electrolyte can be simply emptied and refilled if necessary. Click & Clear™is a sleeve junction that enables optimum contact between the electrolyte and measurement solution, even in difficult samples.

Технические характеристики - perfectION™ comb Ag/S2 Combination Electrode

     All combined ion-selective electrodes consist of a measuring electrode complete with an integrated reference. There is therefore no need for an additional reference electrode. 

• Sensor with attached cable and BNC connector 
• Reference electrolyte (60 mL) 
• Operating instructions 

     To ensure an unproblematic start to your ISE measurement, the required calibration standards and ISA solutions (Ionic Strength Adjuster) can be ordered at the same time.

Order information:

     ISE measurement has never been so simple! The new Click & Clear™ junction of the combined ion-selective electrodes combines three advantages in one tool: The electrolyte solution can flow easily through the junction by pressing the electrode head downwards. This ensures that the junction is optimally cleaned between the measurements and the electrolyte can be simply emptied and refilled if necessary. Click & Clear™is a sleeve junction that enables optimum contact between the electrolyte and measurement solution, even in difficult samples.

Технические характеристики - perfectION™ comb Ag/S2 Lemo Combination Electrode

     All combined ion-selective electrodes consist of a measuring electrode complete with an integrated reference. There is therefore no need for an additional reference electrode. 

• Sensor with attached cable and LEMO connector 
• Reference electrolyte (60 mL) 
• Operating instructions 

     To ensure an unproblematic start to your ISE measurement, the required calibration standards and ISA solutions (Ionic Strength Adjuster) can be ordered at the same time.

Order information:

     ISE measurement has never been so simple! The new Click & Clear™ junction of the combined ion-selective electrodes combines three advantages in one tool: The electrolyte solution can flow easily through the junction by pressing the electrode head downwards. This ensures that the junction is optimally cleaned between the measurements and the electrolyte can be simply emptied and refilled if necessary. Click & Clear™is a sleeve junction that enables optimum contact between the electrolyte and measurement solution, even in difficult samples.

Технические характеристики - perfectION™ comb Ca Combination Electrode

     All combined ion-selective electrodes consist of a measuring electrode complete with an integrated reference. There is therefore no need for an additional reference electrode. In electrodes with a polymer membrane, the membrane module can also be replaced. One replacement module is supplied with every new electrode; all at no extra cost! 

• Sensor with attached cable and BNC connector 
• Reference electrolyte (60 mL) 
• Operating instructions 
• 1 replacement module 

     To ensure an unproblematic start to your ISE measurement, the required calibration standards and ISA solutions (Ionic Strength Adjuster) can be ordered at the same time.

Order information:

     ISE measurement has never been so simple! The new Click & Clear™ junction of the combined ion-selective electrodes combines three advantages in one tool: The electrolyte solution can flow easily through the junction by pressing the electrode head downwards. This ensures that the junction is optimally cleaned between the measurements and the electrolyte can be simply emptied and refilled if necessary. Click & Clear™is a sleeve junction that enables optimum contact between the electrolyte and measurement solution, even in difficult samples.

Технические характеристики - perfectION™ comb Ca Lemo Combination Electrode

     All combined ion-selective electrodes consist of a measuring electrode complete with an integrated reference. There is therefore no need for an additional reference electrode. In electrodes with a polymer membrane, the membrane module can also be replaced. One replacement module is supplied with every new electrode; all at no extra cost! 

• Sensor with attached cable and LEMO connector 
• Reference electrolyte (60 mL) 
• Operating instructions 
• 1 replacement module 

     To ensure an unproblematic start to your ISE measurement, the required calibration standards and ISA solutions (Ionic Strength Adjuster) can be ordered at the same time.

Order information:

     ISE measurement has never been so simple! The new Click & Clear™ junction of the combined ion-selective electrodes combines three advantages in one tool: The electrolyte solution can flow easily through the junction by pressing the electrode head downwards. This ensures that the junction is optimally cleaned between the measurements and the electrolyte can be simply emptied and refilled if necessary. Click & Clear™is a sleeve junction that enables optimum contact between the electrolyte and measurement solution, even in difficult samples.

Технические характеристики - perfectION™ comb Cl Combination Electrode

     All combined ion-selective electrodes consist of a measuring electrode complete with an integrated reference. There is therefore no need for an additional reference electrode. 

• Sensor with attached cable and BNC connector 
• Reference electrolyte (60 mL) 
• Operating instructions 

     To ensure an unproblematic start to your ISE measurement, the required calibration standards and ISA solutions (Ionic Strength Adjuster) can be ordered at the same time.

Order information:

     ISE measurement has never been so simple! The new Click & Clear™ junction of the combined ion-selective electrodes combines three advantages in one tool: The electrolyte solution can flow easily through the junction by pressing the electrode head downwards. This ensures that the junction is optimally cleaned between the measurements and the electrolyte can be simply emptied and refilled if necessary. Click & Clear™is a sleeve junction that enables optimum contact between the electrolyte and measurement solution, even in difficult samples.

Технические характеристики - perfectION™ comb Cl Lemo Combination Electrode

     All combined ion-selective electrodes consist of a measuring electrode complete with an integrated reference. There is therefore no need for an additional reference electrode. 

• Sensor with attached cable and LEMO connector 
• Reference electrolyte (60 mL) 
• Operating instructions 

     To ensure an unproblematic start to your ISE measurement, the required calibration standards and ISA solutions (Ionic Strength Adjuster) can be ordered at the same time. 

Order information:

     ISE measurement has never been so simple! The new Click & Clear™ junction of the combined ion-selective electrodes combines three advantages in one tool: The electrolyte solution can flow easily through the junction by pressing the electrode head downwards. This ensures that the junction is optimally cleaned between the measurements and the electrolyte can be simply emptied and refilled if necessary. Click & Clear™is a sleeve junction that enables optimum contact between the electrolyte and measurement solution, even in difficult samples.

Технические характеристики - perfectION™ comb CN Combination Electrode

     All combined ion-selective electrodes consist of a measuring electrode complete with an integrated reference. There is therefore no need for an additional reference electrode. 

• Sensor with attached cable and BNC connector 
• Reference electrolyte (60 mL) 
• Operating instructions 

     To ensure an unproblematic start to your ISE measurement, the required calibration standards and ISA solutions (Ionic Strength Adjuster) can be ordered at the same time.

Order information:

     ISE measurement has never been so simple! The new Click & Clear™ junction of the combined ion-selective electrodes combines three advantages in one tool: The electrolyte solution can flow easily through the junction by pressing the electrode head downwards. This ensures that the junction is optimally cleaned between the measurements and the electrolyte can be simply emptied and refilled if necessary. Click & Clear™is a sleeve junction that enables optimum contact between the electrolyte and measurement solution, even in difficult samples.

Технические характеристики - perfectION™ comb CN Lemo Combination Electrode

     All combined ion-selective electrodes consist of a measuring electrode complete with an integrated reference. There is therefore no need for an additional reference electrode. 

• Sensor with attached cable and LEMO connector 
• Reference electrolyte (60 mL) 
• Operating instructions 

     To ensure an unproblematic start to your ISE measurement, the required calibration standards and ISA solutions (Ionic Strength Adjuster) can be ordered at the same time.

Order information:

     ISE measurement has never been so simple! The new Click & Clear™ junction of the combined ion-selective electrodes combines three advantages in one tool: The electrolyte solution can flow easily through the junction by pressing the electrode head downwards. This ensures that the junction is optimally cleaned between the measurements and the electrolyte can be simply emptied and refilled if necessary. Click & Clear™is a sleeve junction that enables optimum contact between the electrolyte and measurement solution, even in difficult samples.

Технические характеристики - perfectION™ comb Cu Combination Electrode

    All combined ion-selective electrodes consist of a measuring electrode complete with an integrated reference. There is therefore no need for an additional reference electrode. 

• Sensor with attached cable and BNC connector 
• Reference electrolyte (60 mL) 
• Operating instructions 

    To ensure an unproblematic start to your ISE measurement, the required calibration standards and ISA solutions (Ionic Strength Adjuster) can be ordered at the same time.

Order information:

     ISE measurement has never been so simple! The new Click & Clear™ junction of the combined ion-selective electrodes combines three advantages in one tool: The electrolyte solution can flow easily through the junction by pressing the electrode head downwards. This ensures that the junction is optimally cleaned between the measurements and the electrolyte can be simply emptied and refilled if necessary. Click & Clear™is a sleeve junction that enables optimum contact between the electrolyte and measurement solution, even in difficult samples.

Технические характеристики - perfectION™ comb Cu Lemo Combination Electrode

     All combined ion-selective electrodes consist of a measuring electrode complete with an integrated reference. There is therefore no need for an additional reference electrode. 

• Sensor with attached cable and LEMO connector 
• Reference electrolyte (60 mL) 
• Operating instructions 

     To ensure an unproblematic start to your ISE measurement, the required calibration standards and ISA solutions (Ionic Strength Adjuster) can be ordered at the same time.

Order information:

     ISE measurement has never been so simple! The new Click & Clear™ junction of the combined ion-selective electrodes combines three advantages in one tool: The electrolyte solution can flow easily through the junction by pressing the electrode head downwards. This ensures that the junction is optimally cleaned between the measurements and the electrolyte can be simply emptied and refilled if necessary. Click & Clear™is a sleeve junction that enables optimum contact between the electrolyte and measurement solution, even in difficult samples.

Технические характеристики - perfectION™ comb F Combination Electrode

     All combined ion-selective electrodes consist of a measuring electrode complete with an integrated reference. There is therefore no need for an additional reference electrode. 

• Sensor with attached cable and BNC connector 
• Reference electrolyte (60 mL) 
• Operating instructions 

     To ensure an unproblematic start to your ISE measurement, the required calibration standards and ISA solutions (Ionic Strength Adjuster) can be ordered at the same time.

Order information:

     ISE measurement has never been so simple! The new Click & Clear™ junction of the combined ion-selective electrodes combines three advantages in one tool: The electrolyte solution can flow easily through the junction by pressing the electrode head downwards. This ensures that the junction is optimally cleaned between the measurements and the electrolyte can be simply emptied and refilled if necessary. Click & Clear™is a sleeve junction that enables optimum contact between the electrolyte and measurement solution, even in difficult samples.

Технические характеристики - perfectION™ comb F Lemo Combination Electrode

     All combined ion-selective electrodes consist of a measuring electrode complete with an integrated reference. There is therefore no need for an additional reference electrode.

• Sensor with attached cable and LEMO connector 
• Reference electrolyte (60 mL) 
• Operating instructions 

     To ensure an unproblematic start to your ISE measurement, the required calibration standards and ISA solutions (Ionic Strength Adjuster) can be ordered at the same time.

Order information:

     ISE measurement has never been so simple! The new Click & Clear™ junction of the combined ion-selective electrodes combines three advantages in one tool: The electrolyte solution can flow easily through the junction by pressing the electrode head downwards. This ensures that the junction is optimally cleaned between the measurements and the electrolyte can be simply emptied and refilled if necessary. Click & Clear™is a sleeve junction that enables optimum contact between the electrolyte and measurement solution, even in difficult samples.

Технические характеристики - perfectION™ comb I Combination Electrode

     All combined ion-selective electrodes consist of a measuring electrode complete with an integrated reference. There is therefore no need for an additional reference electrode. 

• Sensor with attached cable and BNC connector 
• Reference electrolyte (60 mL) 
• Operating instructions 

     To ensure an unproblematic start to your ISE measurement, the required calibration standards and ISA solutions (Ionic Strength Adjuster) can be ordered at the same time.

Order information:

     ISE measurement has never been so simple! The new Click & Clear™ junction of the combined ion-selective electrodes combines three advantages in one tool: The electrolyte solution can flow easily through the junction by pressing the electrode head downwards. This ensures that the junction is optimally cleaned between the measurements and the electrolyte can be simply emptied and refilled if necessary. Click & Clear™is a sleeve junction that enables optimum contact between the electrolyte and measurement solution, even in difficult samples.

Технические характеристики - perfectION™ comb I Lemo Combination Electrode

     All combined ion-selective electrodes consist of a measuring electrode complete with an integrated reference. There is therefore no need for an additional reference electrode. 

• Sensor with attached cable and LEMO connector 
• Reference electrolyte (60 mL) 
• Operating instructions 

     To ensure an unproblematic start to your ISE measurement, the required calibration standards and ISA solutions (Ionic Strength Adjuster) can be ordered at the same time.

Order information:

     ISE measurement has never been so simple! The new Click & Clear™ junction of the combined ion-selective electrodes combines three advantages in one tool: The electrolyte solution can flow easily through the junction by pressing the electrode head downwards. This ensures that the junction is optimally cleaned between the measurements and the electrolyte can be simply emptied and refilled if necessary. Click & Clear™is a sleeve junction that enables optimum contact between the electrolyte and measurement solution, even in difficult samples.

Технические характеристики - perfectION™ comb K Combination Electrode

     All combined ion-selective electrodes consist of a measuring electrode complete with an integrated reference. There is therefore no need for an additional reference electrode. In electrodes with a polymer membrane, the membrane module can also be replaced. One replacement module is supplied with every new electrode; all at no extra cost! 

• Sensor with attached cable and BNC connector 
• Reference electrolyte (60 mL) 
• Operating instructions 
• 1 replacement module 

     To ensure an unproblematic start to your ISE measurement, the required calibration standards and ISA solutions (Ionic Strength Adjuster) can be ordered at the same time.

Order information:

     ISE measurement has never been so simple! The new Click & Clear™ junction of the combined ion-selective electrodes combines three advantages in one tool: The electrolyte solution can flow easily through the junction by pressing the electrode head downwards. This ensures that the junction is optimally cleaned between the measurements and the electrolyte can be simply emptied and refilled if necessary. Click & Clear™is a sleeve junction that enables optimum contact between the electrolyte and measurement solution, even in difficult samples.

Технические характеристики - perfectION™ comb K Lemo Combination Electrode

     All combined ion-selective electrodes consist of a measuring electrode complete with an integrated reference. There is therefore no need for an additional reference electrode. In electrodes with a polymer membrane, the membrane module can also be replaced. One replacement module is supplied with every new electrode; all at no extra cost! 

• Sensor with attached cable and LEMO connector 
• Reference electrolyte (60 mL) 
• Operating instructions 
• 1 replacement module 

     To ensure an unproblematic start to your ISE measurement, the required calibration standards and ISA solutions (Ionic Strength Adjuster) can be ordered at the same time.

Order information:

     An electrode for determining the sodium concentration of samples such as food, biological fluids and cooling water. The sodium electrode has a similar construction to a normal pH electrode but uses membrane glass with a higher selectivity for sodium.

Технические характеристики - perfectION™ comb Na Combination Electrode

     All combined ion-selective electrodes consist of a measuring electrode complete with an integrated reference. There is therefore no need for an additional reference electrode. 

• Sensor with S7 head 
• Reference electrolyte (25 mL) 
• Operating instructions 

     To ensure an unproblematic start to your ISE measurement, the required calibration standards and ISA solutions (Ionic Strength Adjuster) can be ordered at the same time.

Order information:

     ISE measurement has never been so simple! The new Click & Clear™ junction of the combined ion-selective electrodes combines three advantages in one tool: The electrolyte solution can flow easily through the junction by pressing the electrode head downwards. This ensures that the junction is optimally cleaned between the measurements and the electrolyte can be simply emptied and refilled if necessary. Click & Clear™is a sleeve junction that enables optimum contact between the electrolyte and measurement solution, even in difficult samples.

Технические характеристики - perfectION™ comb NO3 Combination Electrode

     All combined ion-selective electrodes consist of a measuring electrode complete with an integrated reference. There is therefore no need for an additional reference electrode. In electrodes with a polymer membrane, the membrane module can also be replaced. One replacement module is supplied with every new electrode; all at no extra cost! 

• Sensor with attached cable and BNC connector 
• Reference electrolyte (60 mL) 
• Operating instructions 
• 1 replacement module 

     To ensure an unproblematic start to your ISE measurement, the required calibration standards and ISA solutions (Ionic Strength Adjuster) can be ordered at the same time.

Order information:

     ISE measurement has never been so simple! The new Click & Clear™ junction of the combined ion-selective electrodes combines three advantages in one tool: The electrolyte solution can flow easily through the junction by pressing the electrode head downwards. This ensures that the junction is optimally cleaned between the measurements and the electrolyte can be simply emptied and refilled if necessary. Click & Clear™is a sleeve junction that enables optimum contact between the electrolyte and measurement solution, even in difficult samples.

Технические характеристики - perfectION™ comb NO3 Lemo Combination Electrode

     All combined ion-selective electrodes consist of a measuring electrode complete with an integrated reference. There is therefore no need for an additional reference electrode. In electrodes with a polymer membrane, the membrane module can also be replaced. One replacement module is supplied with every new electrode; all at no extra cost! 

• Sensor with attached cable and LEMO connector 
• Reference electrolyte (60 mL) 
• Operating instructions 
• 1 replacement module 

     To ensure an unproblematic start to your ISE measurement, the required calibration standards and ISA solutions (Ionic Strength Adjuster) can be ordered at the same time.

Order information:

     ISE measurement has never been so simple! The new Click & Clear™ junction of the combined ion-selective electrodes combines three advantages in one tool: The electrolyte solution can flow easily through the junction by pressing the electrode head downwards. This ensures that the junction is optimally cleaned between the measurements and the electrolyte can be simply emptied and refilled if necessary. Click & Clear™is a sleeve junction that enables optimum contact between the electrolyte and measurement solution, even in difficult samples.

Технические характеристики - perfectION™ comb Pb Combination Electrode

     All combined ion-selective electrodes consist of a measuring electrode complete with an integrated reference. There is therefore no need for an additional reference electrode. 

• Sensor with attached cable and BNC connector 
• Reference electrolyte (60 mL) 
• Operating instructions 

     To ensure an unproblematic start to your ISE measurement, the required calibration standards and ISA solutions (Ionic Strength Adjuster) can be ordered at the same time.

Order information:

     ISE measurement has never been so simple! The new Click & Clear™ junction of the combined ion-selective electrodes combines three advantages in one tool: The electrolyte solution can flow easily through the junction by pressing the electrode head downwards. This ensures that the junction is optimally cleaned between the measurements and the electrolyte can be simply emptied and refilled if necessary. Click & Clear™is a sleeve junction that enables optimum contact between the electrolyte and measurement solution, even in difficult samples.

Технические характеристики - perfectION™ comb Pb Lemo Combination Electrode

     All combined ion-selective electrodes consist of a measuring electrode complete with an integrated reference. There is therefore no need for an additional reference electrode. 

• Sensor with attached cable and LEMO connector 
• Reference electrolyte (60 mL) 
• Operating instructions 

     To ensure an unproblematic start to your ISE measurement, the required calibration standards and ISA solutions (Ionic Strength Adjuster) can be ordered at the same time.

Order information:

ISE DX series

     An electrode for determining nitrate concentration of samples such as fertiliser, water, meat and vegetables.

Технические характеристики - DX262-NO3 Nitrate half-cell

     The rugged plastic shaft makes the nitrate electrode ideal for both field and laboratory applications.
The ion selective membrane is reinforced by a fine mesh for improved stability and longer life.

• Rugged plastic shaft
• Reinforced membrane

Gas Measurement

An electrode for determining the nitrogen oxide concentration of samples such as sewage and exhaust gases.

Технические характеристики - Nitrogen Oxide Electrode

     A gas sensing electrode (GSE) consists of a pH electrode immersed in an electrolyte solution which is separated from the measuring solution by a gas sensitive membrane. The gas which has to be determined, diffuses through the membrane and changes the pH value of the electrolyte.
Concentrations of acid or alkaline gases can easily be determined in this way. The rugged plastic shaft makes the GSE ideal for both field and laboratory applications.

• Rugged plastic shaft
• Gas sensing membrane

ISE DX series

     An electrode for determining potassium concentration of samples such as wine, soil, serum, fertiliser and infusions.

Технические характеристики - DX239-K Potassium half-cell

     The rugged plastic shaft makes the potassium electrode ideal for both field and laboratory applications.
The ion selective membrane is reinforced by a fine mesh for improved stability and longer life.

• Rugged plastic shaft
• Reinforced membrane

ISE DX series

     An electrode for determining the sodium concentration of samples such as food, biological fluids and cooling water.

Технические характеристики - DX223-Na Sodium half-cell

     The sodium electrode has a similar construction to a normal pH electrode but uses membrane glass with a higher selectivity for sodium.
     The electrode has a fast response time and requires no maintenance.

• Fast response
• No maintenance

     An electrode for determining the ammonia concentration of samples such as sewage and kjeldahl distillate.

Технические характеристики - Ammonia Electrode

     A gas sensing electrode (GSE) consists of a pH electrode immersed in an electrolyte solution which is separated from the measuring solution by a gas sensitive membrane. The gas which has to be determined, diffuses through the membrane and changes the pH value of the electrolyte. Concentrations of acid or alkaline gases can easily be determined in this way.
      The rugged plastic shaft makes the GSE ideal for both field and laboratory applications.

• Rugged plastic shaft
• Gas sensing membrane

ISE DX series

     An electrode for determining ammonium concentration of samples such as boiler feed water, food and fertiliser.

Технические характеристики - DX218-NH4 Ammonium half-cell

    The rugged plastic shaft makes the ammonium electrode ideal for both field and laboratory applications.
The ion selective membrane is reinforced by a fine mesh for improved stability and longer life.

• Rugged plastic shaft
• Reinforced membrane

ISE DX series

An electrode for determining bromide concentration in samples such as photographic emulsions.

Технические характеристики - DX280-Br Bromide half-cell

The robust solid state membrane and plastic shaft make the bromide electrode ideal for both field and laboratory applications.

• Solid state membrane
• Rugged plastic shaft

ISE DX series

An electrode for determining calcium concentration of samples such as milk, serum and soil samples.

Технические характеристики - DX240-Ca Calcium half-cell

     The rugged plastic shaft makes the calcium electrode ideal for both field and laboratory applications.
The ion selective membrane is reinforced by a fine mesh for improved stability and longer life.

• Rugged plastic shaft
• Reinforced membrane

Gas Measurement

An electrode for determining the carbon dioxide concentration of samples such as sewage and kjeldahl distillate.

Технические характеристики - Carbon Dioxide Electrode

Особенности и преимущества

     A gas sensing electrode (GSE) consists of a pH electrode immersed in an electrolyte solution which is separated from the measuring solution by a gas sensitive membrane. The gas which has to be determined, diffuses through the membrane and changes the pH value of the electrolyte. Concentrations of acid or alkaline gases can easily be determined in this way.
      The rugged plastic shaft makes the GSE electrode ideal for both field and laboratory applications.

• Rugged plastic shaft
• Gas sensing membrane

ISE DX series

     An electrode for determining chloride concentrations in samples such as food, water, and building materials.

Технические характеристики - DX235-Cl Chloride half-cell

The robust solid state membrane and plastic shaft make the fluoride electrode ideal for both field and laboratory applications.

• Solid state membrane
• Rugged plastic shaft

ISE DX series

     Each ion-selective electrode (ISE) and each membrane module is tested wet-chemically. It has to pass the stringent requirements of several direct measurements as well as a typical titration application. Each ISE is issued with its own serial number and quality certificate. There is no better quality assurance than this.

Modular and versatile
     METTLER TOLEDO ion-selective half-cells consist of two elements: a universal shaft and an ion-specific membrane module. This module may be exchanged allowing you to measure the ion of your choice. Just order the membrane kit specific for that ion, mount the new module onto the shaft of your ISE half-cell, and you have a new ISE!

ISE DX series

     Each ion-selective electrode (ISE) and each membrane module is tested wet-chemically. It has to pass the stringent requirements of several direct measurements as well as a typical titration application. Each ISE is issued with its own serial number and quality certificate. There is no better quality assurance than this.

Modular and versatile
     METTLER TOLEDO ion-selective half-cells consist of two elements: a universal shaft and an ion-specific membrane module. This module may be exchanged allowing you to measure the ion of your choice. Just order the membrane kit specific for that ion, mount the new module onto the shaft of your ISE half-cell, and you have a new ISE!

ISE DX series

     Each ion-selective electrode (ISE) and each membrane module is tested wet-chemically. It has to pass the stringent requirements of several direct measurements as well as a typical titration application. Each ISE is issued with its own serial number and quality certificate. There is no better quality assurance than this.

Modular and versatile
     METTLER TOLEDO ion-selective half-cells consist of two elements: a universal shaft and an ion-specific membrane module. This module may be exchanged allowing you to measure the ion of your choice. Just order the membrane kit specific for that ion, mount the new module onto the shaft of your ISE half-cell, and you have a new ISE!

ISE DX series

     Each ion-selective electrode (ISE) and each membrane module is tested wet-chemically. It has to pass the stringent requirements of several direct measurements as well as a typical titration application. Each ISE is issued with its own serial number and quality certificate. There is no better quality assurance than this.

Modular and versatile
     METTLER TOLEDO ion-selective half-cells consist of two elements: a universal shaft and an ion-specific membrane module. This module may be exchanged allowing you to measure the ion of your choice. Just order the membrane kit specific for that ion, mount the new module onto the shaft of your ISE half-cell, and you have a new ISE!

ISE DX series

     Each ion-selective electrode (ISE) and each membrane module is tested wet-chemically. It has to pass the stringent requirements of several direct measurements as well as a typical titration application. Each ISE is issued with its own serial number and quality certificate. There is no better quality assurance than this.

Modular and versatile
     METTLER TOLEDO ion-selective half-cells consist of two elements: a universal shaft and an ion-specific membrane module. This module may be exchanged allowing you to measure the ion of your choice. Just order the membrane kit specific for that ion, mount the new module onto the shaft of your ISE half-cell, and you have a new ISE!

ISE DX series

     Each ion-selective electrode (ISE) and each membrane module is tested wet-chemically. It has to pass the stringent requirements of several direct measurements as well as a typical titration application. Each ISE is issued with its own serial number and quality certificate. There is no better quality assurance than this.

Modular and versatile
     METTLER TOLEDO ion-selective half-cells consist of two elements: a universal shaft and an ion-specific membrane module. This module may be exchanged allowing you to measure the ion of your choice. Just order the membrane kit specific for that ion, mount the new module onto the shaft of your ISE half-cell, and you have a new ISE!

ISE DX series

     Each ion-selective electrode (ISE) and each membrane module is tested wet-chemically. It has to pass the stringent requirements of several direct measurements as well as a typical titration application. Each ISE is issued with its own serial number and quality certificate. There is no better quality assurance than this.

Modular and versatile
     METTLER TOLEDO ion-selective half-cells consist of two elements: a universal shaft and an ion-specific membrane module. This module may be exchanged allowing you to measure the ion of your choice. Just order the membrane kit specific for that ion, mount the new module onto the shaft of your ISE half-cell, and you have a new ISE!

ISE DX series

     Each ion-selective electrode (ISE) and each membrane module is tested wet-chemically. It has to pass the stringent requirements of several direct measurements as well as a typical titration application. Each ISE is issued with its own serial number and quality certificate. There is no better quality assurance than this.

Modular and versatile
     METTLER TOLEDO ion-selective half-cells consist of two elements: a universal shaft and an ion-specific membrane module. This module may be exchanged allowing you to measure the ion of your choice. Just order the membrane kit specific for that ion, mount the new module onto the shaft of your ISE half-cell, and you have a new ISE!

ISE DX series

     Each ion-selective electrode (ISE) and each membrane module is tested wet-chemically. It has to pass the stringent requirements of several direct measurements as well as a typical titration application. Each ISE is issued with its own serial number and quality certificate. There is no better quality assurance than this.

Modular and versatile
    METTLER TOLEDO ion-selective half-cells consist of two elements: a universal shaft and an ion-specific membrane module. This module may be exchanged allowing you to measure the ion of your choice. Just order the membrane kit specific for that ion, mount the new module onto the shaft of your ISE half-cell, and you have a new ISE!

ISE DX series

     Each ion-selective electrode (ISE) and each membrane module is tested wet-chemically. It has to pass the stringent requirements of several direct measurements as well as a typical titration application. Each ISE is issued with its own serial number and quality certificate. There is no better quality assurance than this.

Modular and versatile
     METTLER TOLEDO ion-selective half-cells consist of two elements: a universal shaft and an ion-specific membrane module. This module may be exchanged allowing you to measure the ion of your choice. Just order the membrane kit specific for that ion, mount the new module onto the shaft of your ISE half-cell, and you have a new ISE!

ISE DX series

     Each ion-selective electrode (ISE) and each membrane module is tested wet-chemically. It has to pass the stringent requirements of several direct measurements as well as a typical titration application. Each ISE is issued with its own serial number and quality certificate. There is no better quality assurance than this.

Modular and versatile
     METTLER TOLEDO ion-selective half-cells consist of two elements: a universal shaft and an ion-specific membrane module. This module may be exchanged allowing you to measure the ion of your choice. Just order the membrane kit specific for that ion, mount the new module onto the shaft of your ISE half-cell, and you have a new ISE!