В наличии!
      Лаборатория
Предлагаем со склада в Алматы (ссылки):

Датчики электропроводности InLab

ssaaqqwwe11Просто и надежно

     Высокое качество наших датчиков электропроводности InLab в сочетании с простотой в обращении делают их идеальными для любого типа применений. Более того, каждый такой датчик снабжается сертификатом, в котором указана номинальная или фактическая постоянная ячейки.
     Для измерения низких значений электропроводности ассортимент дополнен полезными проточными ячейками.

InLab®731 Conductivity Probe

InLab731_l_jpgGeneral Purpose Conductivity Measurements

A 4-pole conductivity probe with integrated temperature sensor and attached cable.
Ideal for general measurements in aqueous media.
Nominal cell constant: 0.57 /cm.

 

 


Технические характеристики - InLab®731 Conductivity Probe

Краткое описание built for SevenEasy™, SevenMulti™, FiveEasy™ and FiveGo™
Диапазон измерения 0.01 ... 1000 mS/cm
Температурный диапазон, °C 0 ... 100
Длина погружной части 120 mm
Диаметр погружной части 12 mm
Материал корпуса Epoxy / graphite
Кабели и коннекторы 1.2 m cable, mini-DIN
Датчик температуры NTC 30 kOhm
Номер заказа 51344020

Описание

   The InLab®731 operates over a wide measuring range which means that this probe can be used for many different sample types.
    The integrated temperature sensor does away with the need for a separate temperature probe by compensating for the difference in temperature between the sample and reference temperature.
    The plastic body gives full protection when used in ´rough handling´ environments. The open tip design allows for easy rinsing and minimizes sample carryover.

  • Wide measuring range thanks to maximum linearity
  • Open tip design for minimum sample carryover
  • Integrated temperature sensor
  • Rugged plastic shaft

InLab®731 ISM Conductivity Probe

InLab731_l_jpgGeneral Purpose Conductivity Measurements

    A 4-pole conductivity probe with integrated temperature sensor, attached cable and intelligent sensor management.
Ideal for general measurements in aqueous media.
Nominal cell constant: 0.57 /cm.

 

 

Технические характеристики - InLab®731 ISM Conductivity Probe

Краткое описание built for SevenExcellence™ and SevenCompact™
Диапазон измерения 0.01 ... 1000 mS/cm
Температурный диапазон, °C 0 ... 100
Длина погружной части 120 mm
Диаметр погружной части 12 mm
Материал корпуса Epoxy / graphite
Кабели и коннекторы 1.2 m cable, mini-DIN, ISM
Датчик температуры NTC 30 kOhm
Номер заказа 30014092

Описание

     The InLab®731 ISM operates over a wide measuring range which means that this probe can be used for many different sample types.
    The integrated temperature sensor does away with the need for a separate temperature probe by compensating for the difference in temperature between the sample and reference temperature.
    The plastic body gives full protection when used in ´rough handling´ environments. The open tip design allows for easy rinsing and minimizes sample carryover.

  • Intelligent sensor management (ISM®)
  • Wide measuring range thanks to maximum linearity
  • Open tip design for minimum sample carryover
  • Integrated temperature sensor
  • Rugged plastic shaft

InLab®731-2m Conductivity Probe

InLab731_2m_l_jpgGeneral Purpose Conductivity Measurements

A 4-pole conductivity probe with integrated temperature sensor and attached cable.
Ideal for general measurements in aqueous media.
Nominal cell constant: 0.57 /cm.

 

 


Технические характеристики - InLab®731-2m Conductivity Probe

Краткое описание built for SevenEasy™, SevenMulti™, FiveEasy™ and FiveGo™
Диапазон измерения 0.01 ... 1000 mS/cm
Температурный диапазон, °C 0 ... 100
Длина погружной части 120 mm
Диаметр погружной части 12 mm
Материал корпуса Epoxy / graphite
Кабели и коннекторы 2 m cable, mini DIN
Датчик температуры NTC 30 kOhm
Номер заказа 51344022

Описание

       The InLab®731-2m operates over a wide measuring range which means that this probe can be used for many different sample types.
     The integrated temperature sensor does away with the need for a separate temperature probe by compensating for the difference in temperature between the sample and reference temperature.
       The plastic body gives full protection when used in ´rough handling´ environments. The open tip design allows for easy rinsing and minimizes sample carryover.

  • Wide measuring range thanks to maximum linearity
  • Open tip design for minimum sample carryover
  • Integrated temperature sensor
  • Rugged plastic shaft

InLab®731 ISM-2m Conductivity Probe

InLab731_2m_l_jpgGeneral Purpose Conductivity Measurements

A 4-pole conductivity probe with integrated temperature sensor and attached cable.
Ideal for general measurements in aqueous media.
Nominal cell constant: 0.57 /cm.

 

 


Технические характеристики - InLab®731 ISM-2m Conductivity Probe

Краткое описание built for SevenExcellence™ and SevenCompact™
Диапазон измерения 0.01 ... 1000 mS/cm
Температурный диапазон, °C 0 ... 100
Длина погружной части 120 mm
Диаметр погружной части 12 mm
Материал корпуса Epoxy / graphite
Кабели и коннекторы 2 m cable, mini DIN, ISM
Датчик температуры NTC 30 kOhm
Номер заказа 30014092

Описание

     The InLab®731 ISM-2m operates over a wide measuring range which means that this probe can be used for many different sample types.
     The integrated temperature sensor does away with the need for a separate temperature probe by compensating for the difference in temperature between the sample and reference temperature.
      The plastic body gives full protection when used in ´rough handling´ environments. The open tip design allows for easy rinsing and minimizes sample carryover.

  • Intelligent sensor management (ISM®)
  • Wide measuring range thanks to maximum linearity
  • Open tip design for minimum sample carryover
  • Integrated temperature sensor
  • Rugged plastic shaft

InLab®741 Conductivity Probe

InLab741_l_jpgFor pure and ultra-pure water

     A high precision 2-pole conductivity cell with integrated temperature sensor for low conductivity measurement.
Recommended for low conductivity measurements in the laboratry.
Nominal cell constant: 0.105 /cm.

 

 

Технические характеристики - InLab®741 Conductivity Probe

Краткое описание built for SevenEasy™ and SevenMulti™
Диапазон измерения 0.001 ... 500 µS/cm
Температурный диапазон, °C 0 ... 100
Длина погружной части 120 mm
Диаметр погружной части 12 mm
Материал корпуса Stainless steel
Кабели и коннекторы 1.2 m cable, Mini-DIN
Номер заказа 51344024

Описание

     The stainless steel cell of the InLab®741 is especially designed for highly accurate and precise results of pure and ultra-pure water, and the risk of carryover from one sample to another is reduced to a minimum.
     The InLab®741 comes with a quality certificate that indicates the actual cell constant. In addition, each individual cell constant is stated on the cable.
For measurements of ultra-pure water the METTLER TOLEDO glass flow -cell is recommended.
    The integrated temperature sensor does away with the need for a separate temperature probe by compensating for the difference in temperature between the sample and reference temperature.

  • High precision 2 electrode cell
  • Minimum sample carryover
  • Robust stainless steel shaft and measuring cell
  • Integrated temperature sensor

InLab®741 ISM Conductivity Probe

InLab741_l_jpgFor pure and ultra-pure water

     A high precision 2-pole conductivity cell with integrated temperature sensor for low conductivity measurement.
Recommended for low conductivity measurements in the laboratry.
Nominal cell constant: 0.105 /cm.

 

 

Технические характеристики - InLab®741 ISM Conductivity Probe

Краткое описание built for SevenExcellence™ and SevenCompact™
Диапазон измерения 0.001 ... 500 µS/cm
Температурный диапазон, °C 0 ... 100
Длина погружной части 120 mm
Диаметр погружной части 12 mm
Материал корпуса Stainless steel
Кабели и коннекторы 1.2 m cable, Mini-DIN, ISM
Номер заказа 30014094

Описание

     The stainless steel cell of the InLab®741 ISM is especially designed for highly accurate and precise results of pure and ultra-pure water, and the risk of carryover from one sample to another is reduced to a minimum.
    The InLab®741 ISM comes with a quality certificate that indicates the actual cell constant. In addition, each individual cell constant is stated on the cable.
      For measurements of ultra-pure water the METTLER TOLEDO glass flow -cell is recommended.
    The integrated temperature sensor does away with the need for a separate temperature probe by compensating for the difference in temperature between the sample and reference temperature.

  • Intelligent sensor management (ISM®)
  • High precision 2 electrode cell
  • Minimum sample carryover
  • Robust stainless steel shaft and measuring cell
  • Integrated temperature sensor

InLab®741-5m Conductivity Probe

InLab741_l_jpgFor pure and ultra-pure water

     A high precision 2-pole conductivity cell with integrated temperature sensor for low conductivity measurement.
Recommended for low conductivity measurements in the laboratry.
Nominal cell constant: 0.105 /cm.

 

 

Технические характеристики - InLab®741-5m Conductivity Probe

Краткое описание built for SevenEasy™ and SevenMulti™
Диапазон измерения 0.001 ... 500 µS/cm
Температурный диапазон, °C 0 ... 100
Длина погружной части 120 mm
Диаметр погружной части 12 mm
Материал корпуса Stainless steel
Кабели и коннекторы 5 m cable, Mini-DIN
Номер 51344026

Описание

     The stainless steel cell of the InLab®741 is especially designed for highly accurate and precise results of pure and ultra-pure water, and the risk of carryover from one sample to another is reduced to a minimum.
     The InLab®741 comes with a quality certificate that indicates the actual cell constant. In addition, each individual cell constant is stated on the cable.
     For measurements of ultra-pure water the METTLER TOLEDO glass flow -cell is recommended.
    The integrated temperature sensor does away with the need for a separate temperature probe by compensating for the difference in temperature between the sample and reference temperature.

  • High precision 2 electrode cell
  • Minimum sample carryover
  • Robust stainless steel shaft and measuring cell
  • Integrated temperature sensor

InLab® Trace

34684

     Low conductivity measurement requires special attention. When measuring pure or ultra-pure water there are several sources of potential error such as carbon dioxide from air and temperature inaccuracy:

  • The digital conductivity sensor InLab® Trace has a high precision temperature probe. The conductivity and temperature signals are digitalized and combined through a special algorithm for unmatched conductivity accuracy.
  • The optional flow-cell made of polypropylene provides the perfect protection from carbon dioxide. Because it does not contain a single piece of conducting material, any interference is excluded. Using the Flow Cell InLab® Trace the highest repeatability and reproducibility ever can be achieved.
  • The Flow Cell InLab® Trace was built at an angle to prevent air bubbles being trapped. Your workflow is optimized to the max. Enjoy the peace of mind.
  • For pure water we also offer a special temperature compensation mode to increase the reliability of your readings.
  • Each sensor is supplied with a certificate specifying the actual cell constant which makes calibration superfluous
qqwwqq22222222

Технические характеристики - InLab® Trace

 

Краткое описание built for SevenExcellence™ and SevenCompact™
Диапазон измерения 0.0001 ... 1000 µS/cm
Температурный диапазон, °C 0 ... 100
Длина погружной части 170 mm
Диаметр погружной части 12 mm
Материал корпуса titanium
Кабели и коннекторы 1.8 m cable, Mini-LTW
Номер заказа 30014097

Описание

  • High precision, digitalized temperature and conductivity readings
  • Cleverly designed Flow Cell InLab® Trace for optimized workflow
  • Certified cell constant which makes calibration superfluous

57207

Order Information:

30014097   InLab® Trace
30014098   Flow Cell InLab® Trace
30014099  InLab® Trace Kit (Sensor & FlowCell)

InLab®738 Conductivity Probe

InLab738_l_jpgWide measuring range, minimum sample carryover

A 4-pole conductivity probe with integrated temperature sensor and attached 1.8m cable.
Recommended for general measurements in the field or factory.
Nominal cell constant: 0.57 /cm.

 

 

Технические характеристики - InLab®738 Conductivity Probe

Краткое описание built for SevenGo™ SG3, SevenGo pro™ SG7
Диапазон измерения 0.01 ... 1000 mS/cm
Температурный диапазон, °C 0 ... 100
Длина погружной части 120 mm
Диаметр погружной части 12 mm
Материал корпуса Epoxy / Graphite
Кабели и коннекторы 1.8 m cable, LTW, IP67
Датчик температуры NTC 30 kOhm
Номер заказа 51344120

Описание

      The InLab®738 operates over a wide measuring range which means that this probe can be used for many different sample types.
     The integrated temperature sensor does away with the need for a separate temperature probe by compensating for the difference in temperature between the sample and reference temperature.
      The plastic body gives full protection when used in ´rough handling´ environments. The open tip design allows for easy rinsing and minimises sample carryover.
       The probe is fully protected against ingress of water and dust (IP67 rated).

  • Open tip design for minimum sample carryover
  • Integrated temperature sensor
  • Rugged plastic shaft
  • Wide measuring range thanks to maximum linearity
  • IP67 protection

InLab®738-5m Conductivity Probe

InLab738_5m_l_jpgWide measuring range, minimum sample carryover

A 4-pole conductivity probe with integrated temperature sensor and attached 5 m cable.
Recommended for general measurements in the field or factory.
Nominal cell constant: 0.57 /cm.

 

 


Технические характеристики - InLab®738-5m Conductivity Probe

Краткое описание built for SevenGo™ SG3 and SevenGo pro™ SG7
Диапазон измерения 0.01 ... 1000 mS/cm
Температурный диапазон, °C 0 ... 100
Длина погружной части 120 mm
Диаметр погружной части 12 mm
Материал корпуса Epoxy / Graphite
Кабели и коннекторы 5 m cable, LTW, IP67
Датчик температуры NTC 30 kOhm
Номер заказа 51344122

Описание

     The InLab®738-5m operates over a wide measuring range which means that this probe can be used for many different sample types.
    The integrated temperature sensor does away with the need for a separate temperature probe by compensating for the difference in temperature between the sample and reference temperature.
     The plastic body gives full protection when used in ´rough handling´ environments. The open tip design allows for easy rinsing and minimises sample carryover. The probe is fully protected against ingress of water and dust (IP67 rated).

  • Open tip design for minimum sample carryover
  • Integrated temperature sensor
  • Rugged plastic shaft
  • Wide measuring range thanks to maximum linearity
  • IP67 protection

InLab®738-10m Conductivity Probe

InLab738_10m_l_jpgWide measuring range, minimum sample carryover

A 4-pole conductivity probe with integrated temperature sensor and attached 10 m cable.
Recommended for general measurements in the field or factory.
Nominal cell constant: 0.57 /cm.

 

 

Технические характеристики - InLab®738-10m Conductivity Probe

Краткое описание built for SevenGo™ SG3, SevenGo pro™ SG7
Диапазон измерения 0.01 ... 1000 mS/cm
Температурный диапазон, °C 0 ... 100
Длина погружной части 120 mm
Диаметр погружной части 12 mm
Материал корпуса Epoxy / Graphite
Кабели и коннекторы 10 m cable, LTW, IP67
Датчик температуры NTC 30 kOhm
Номер заказа 51344124

Описание

      The InLab®738-10m operates over a wide measuring range which means that this probe can be used for many different sample types.
     The integrated temperature sensor does away with the need for a separate temperature probe by compensating for the difference in temperature between the sample and reference temperature.
       The plastic body gives full protection when used in ´rough handling´ environments. The open tip design allows for easy rinsing and minimises sample carryover.
       The probe is fully protected against ingress of water and dust (IP67 rated).

  • Open tip design for minimum sample carryover
  • Integrated temperature sensor
  • Rugged plastic shaft
  • Wide measuring range thanks to maximum linearity
  • IP67 protection

InLab®738 ISM Conductivity Probe

InLab738_ISM_l_jpgWide measuring range, minimum sample carryover

     A 4-pole conductivity probe with integrated temperature sensor, attached 1.8m cable and intelligent sensor management.
Recommended for general measurements in the field or factory.
Nominal cell constant: 0.57 /cm.

 

 

Технические характеристики - InLab®738 ISM Conductivity Probe

Краткое описание built for SevenGo Duo™ SG23 and SevenGo Duo pro™ SG78
Диапазон измерения 0.01 ... 1000 mS/cm
Температурный диапазон, °C 0 ... 100
Длина погружной части 120 mm
Диаметр погружной части 12 mm
Материал корпуса Epoxy / Graphite
Кабели и коннекторы 1.8 m cable, LTW, IP67, ISM
Датчик температуры NTC 30 kOhm
Номер заказа 51344110

Описание

      The InLab®738 ISM operates over a wide measuring range which means that this probe can be used for many different sample types.
     The integrated temperature sensor does away with the need for a separate temperature probe by compensating for the difference in temperature between the sample and reference temperature.
       The plastic body gives full protection when used in ´rough handling´ environments. The open tip design allows for easy rinsing and minimises sample carryover. The probe is fully protected against ingress of water and dust (IP67 rated).

  • Intelligent sensor management (ISM®)
  • Open tip design for minimum sample carryover
  • Integrated temperature sensor
  • Rugged plastic shaft
  • Wide measuring range thanks to maximum linearity
  • IP67 protection

InLab®738 ISM-5m Conductivity Probe

InLab738_ISM_5m_l_jpgWide measuring range, minimum sample carryover

A 4-pole conductivity probe with integrated temperature sensor and attached 5 m cable.
Recommended for general measurements in the field or factory.
Nominal cell constant: 0.57 /cm.

 

 


Технические характеристики - InLab®738 ISM-5m Conductivity Probe

Краткое описание built for SevenGo Duo™ SG23 and SevenGo Duo pro™ SG78
Диапазон измерения 0.01 ... 1000 mS/cm
Температурный диапазон, °C 0 ... 100
Длина погружной части 120 mm
Диаметр погружной части 12 mm
Материал корпуса Epoxy / Graphite
Кабели и коннекторы 5m cable, LTW, IP67, ISM
Датчик температуры NTC 30 kOhm
Номер заказа 51344112

Описание

       The InLab®738 ISM-5m operates over a wide measuring range which means that this probe can be used for many different sample types.
     The integrated temperature sensor does away with the need for a separate temperature probe by compensating for the difference in temperature between the sample and reference temperature.
       The plastic body gives full protection when used in ´rough handling´ environments. The open tip design allows for easy rinsing and minimises sample carryover.
       The probe is fully protected against ingress of water and dust (IP67 rated).

  • Intelligent sensor management (ISM®)
  • Open tip design for minimum sample carryover
  • Integrated temperature sensor
  • Rugged plastic shaft
  • Wide measuring range thanks to maximum linearity
  • IP67 protection

InLab®738 ISM-10m Conductivity Probe

InLab738_10m_l_jpgWide measuring range, minimum sample carryover

A 4-pole conductivity probe with integrated temperature sensor and attached 10 m cable.
Recommended for general measurements in the field or factory.
Nominal cell constant: 0.57 /cm.

 

 

Технические характеристики - InLab®738 ISM-10m Conductivity Probe

Краткое описание built for SevenGo Duo™ SG23 and SevenGo Duo pro™ SG78
Диапазон измерения 0.01 ... 1000 mS/cm
Температурный диапазон, °C 0 ... 100
Длина погружной части 120 mm
Диаметр погружной части 12 mm
Материал корпуса Epoxy / Graphite
Кабели и коннекторы 10 m cable, LTW, IP67, ISM
Датчик температуры NTC 30 kOhm
Номер заказа 51344114

Описание

       The InLab®738 ISM-10m operates over a wide measuring range which means that this probe can be used for many different sample types.
     The integrated temperature sensor does away with the need for a separate temperature probe by compensating for the difference in temperature between the sample and reference temperature.
       The plastic body gives full protection when used in ´rough handling´ environments. The open tip design allows for easy rinsing and minimises sample carryover. The probe is fully protected against ingress of water and dust (IP67 rated).

  • Intelligent sensor management (ISM®)
  • Open tip design for minimum sample carryover
  • Integrated temperature sensor
  • Rugged plastic shaft
  • Wide measuring range thanks to maximum linearity
  • IP67 protection

InLab®742 Conductivity Probe

InLab742_l_jpgFor pure and ultra-pure water

     A high precision 2-pole conductivity cell for low conductivity measurements with integrated temperature sensor and attached 1.8 m cable.
Recommended for general measurements in the field or factory.
Nominal cell constant: 0.105 /cm.

 

 

Технические характеристики - InLab®742 Conductivity Probe

Краткое описание built for SevenGo™ SG3 and SevenGo pro™ SG7
Диапазон измерения 0.001 ... 500 µS/cm
Температурный диапазон, °C 0 ... 100
Длина погружной части 120 mm
Диаметр погружной части 12 mm
Материал корпуса Stainless steel
Кабели и коннекторы 1.8 m cable, LTW, IP67
Номер заказа 51344126

Описание

     The stainless steel cell of the InLab®742 is especially designed for highly accurate and precise results of pure and ultra-pure water, and the risk of carryover from one sample to another is reduced to a minimum.
     The InLab®742 comes with a quality certificate that indicates the actual cell constant. In addition, each individual cell constant is stated on the cable.
     For measurements of ultra-pure water the METTLER TOLEDO glass flow -cell is recommended.
     The probe is fully protected against ingress of water and dust (IP67 rated).

  • High precision 2 electrode cell
  • Minimum sample carryover
  • Robust stainless steel shaft and measuring cell
  • Integrated temperature sensor
  • IP67 protection

InLab®742-5m Conductivity Probe

InLab742_5m_l_jpgFor pure and ultra-pure water

     A high precision 2-pole conductivity cell for low conductivity measurements with integrated temperature sensor and attached 5 m cable.
Recommended for general measurements in the field or factory.
Nominal cell constant: 0.105 /cm.

 

 

Технические характеристики - InLab®742-5m Conductivity Probe

Краткое описание built for SevenGo™ SG3 and SevenGo pro™ SG7
Диапазон измерения 0.001 ... 500 µS/cm
Температурный диапазон, °C 0 ... 100
Длина погружной части 120 mm
Диаметр погружной части 12 mm
Материал корпуса Stainless steel
Кабели и коннекторы 5 m cable, LTW, IP67
Номер заказа 51344128

Описание

     The stainless steel cell of the InLab®742-5m is especially designed for highly accurate and precise results of pure and ultra-pure water, and the risk of carryover from one sample to another is reduced to a minimum.
     The InLab®742-5m comes with a quality certificate that indicates the actual cell constant. In addition, each individual cell constant is stated on the cable.
      For measurements of ultra-pure water the METTLER TOLEDO glass flow -cell is recommended.
      The probe is fully protected against ingress of water and dust (IP67 rated).

  • High precision 2 electrode cell
  • Minimum sample carryover
  • Robust stainless steel shaft and measuring cell
  • Integrated temperature sensor
  • IP67 protection

InLab®742 ISM Conductivity Probe

InLab742_ISM_l_jpgFor pure and ultra-pure water

     A high precision 2-pole conductivity cell for low conductivity measurement with integrated temperature sensor, attached 1.8 m cable and intelligent sensor management.
Recommended for general measurements in the field or factory.
Nominal cell constant: 0.105 /cm.

 


Технические характеристики - InLab®742 ISM Conductivity Probe

Краткое описание built for SevenGo Duo™ SG23 and SevenGo Duo pro™ SG78
Диапазон измерения 0.001 ... 500 µS/cm
Температурный диапазон, °C 0 ... 100
Длина погружной части 120 mm
Диаметр погружной части 12 mm
Материал корпуса Stainless steel
Кабели и коннекторы 1.8 m cable, LTW, IP67, ISM
Номер заказа 51344116

Описание

      The stainless steel cell of the InLab®742 ISM is especially designed for highly accurate and precise results of pure and ultra-pure water and the risk of carryover from one sample to another is reduced to a minimum.
     The InLab®742 ISM comes with a quality certificate that indicates the actual cell constant. In addition, each individual cell constant is stated on the cable.
      For measurements of ultra-pure water the METTLER TOLEDO glass flow -cell is recommended. The probe is fully protected against ingress of water and dust (IP67 rated).

  • Intelligent sensor management (ISM®)
  • High precision 2 electrode cell
  • Minimum sample carryover
  • Robust stainless steel shaft and measuring cell
  • Integrated temperature sensor
  • IP67 protection

InLab®742 ISM-5m Conductivity Probe

InLab742_ISM_l_jpgFor pure and ultra-pure water

     A high precision 2-pole conductivity cell for low conductivity measurement with integrated temperature sensor, attached 5 m cable and intelligent sensor management.
Recommended for general measurements in the field or factory.
Nominal cell constant: 0.105 /cm.

 

 

Технические характеристики - InLab®742 ISM-5m Conductivity Probe

Краткое описание built for SevenGo Duo™ SG23 and SevenGo Duo pro™ SG78
Диапазон измерения 0.001 ... 500 µS/cm
Температурный диапазон, °C 0 ... 100
Длина погружной части 120 mm
Диаметр погружной части 12 mm
Материал корпуса Stainless steel
Кабели и коннекторы 5 m cable, LTW, IP67, ISM
Номер заказа 51344118

Описание

      The stainless steel cell of the InLab®742 ISM-5m is especially designed for highly accurate and precise results of pure and ultra-pure water and the risk of carryover from one sample to another is reduced to a minimum.
      The InLab®742 ISM-5m comes with a quality certificate that indicates the actual cell constant. In addition, each individual cell constant is stated on the cable.
      For measurements of ultra-pure water the METTLER TOLEDO glass flow -cell is recommended. The probe is fully protected against ingress of water and dust (IP67 rated).

  • Intelligent sensor management (ISM®)
  • High precision 2 electrode cell
  • Minimum sample carryover
  • Robust stainless steel shaft and measuring cell
  • Integrated temperature sensor
  • IP67 protection

InLab®710 Conductivity Probe

InLab710_s_jpgConductivity Measurement in Aggressive Samples

A platinum 4-plate conductivity probe with integrated temperature sensor and fixed cable.
Recommended for measurement in aggressive or organic sample types.
Nominal cell constant: 0.80 /cm.

 

 

Технические характеристики - InLab®710 Conductivity Probe

Диапазон измерения 0.01 ... 500 mS/cm
Температурный диапазон, °C 0 ... 100
Длина погружной части 120 mm
Диаметр погружной части 12 mm
Материал корпуса Glass 4 plate cell
Кабели и коннекторы 1 m, mini DIN
Краткое описание built for SevenEasy™, SevenMulti™, FiveEasy™ and FiveGo™
Номер заказа 51302256

Описание

     The integrated temperature sensor avoids the need for a separate temperature probe when compensating for the difference in temperature between the sample and reference temperature.
     Operates over a wide measuring range which means that one probe can be used for many different sample types.
     Glass body resists aggressive or organic sample types.

  • Integrated temperature sensor
  • Glass body
  • Wide measuring range

InLab®717 Conductivity Probe

InLab717_l     Conductivity probe for titrations in aqueous or non-aqueous media in the conductivity range from 10 µS to 500 mS.

 

 

 

 


Технические характеристики - InLab®717 Conductivity Probe

Краткое описание Conductivity probe for conductivity titrations in the medium to high conductivity range
Сферы применения conductivity
Диапазон измерения 10 µS - 500 mS
Температурный диапазон, °C -5 - 105
Длина погружной части 120 mm
Диаметр погружной части 12 mm
Номер заказа 51302401

Особенности и преимущества

  • Glass 4 pole cell
  • Integrated connection cable, 1.0 m.
  • Integrated NTC temperature probe

InLab®718 Conductivity Probe

InLab®718     Conductivity probe for titrations in aqueous or non-aqueous media in the conductivity range from 0.1 to 200 µS.

 

 

 


Технические характеристики - InLab®718 Conductivity Probe

Краткое описание Conductivity probe for conductivity titrations in the low conductivity range
Сферы применения conductivity
Диапазон измерения 0.1 - 200 µS
Температурный диапазон, °C -5 - 100
Длина погружной части 115 mm
Диаметр погружной части 12 mm
Номер заказа 51340266

Особенности и преимущества

  • Glass 2 pole cell
  • Integrated connection cable, 1.2 m.
  • Integrated NTC temperature probe

InLab®720 Conductivity Probe

InLab720_jpgPrecision Conductivity Measurement

A platinum 2-plate conductivity probe with integrated temperature sensor and fixed cable.
Designed for determination of conductivity in pure water samples.
Nominal cell constant: 0.06 /cm.

 

 

Технические характеристики - InLab®720 Conductivity Probe

Диапазон измерения 0.1 ... 500 µS/cm
Температурный диапазон, °C 0 ... 100
Длина погружной части 120 mm
Диаметр погружной части 12 mm
Материал корпуса Glass 2 plate cell
Кабели и коннекторы 1 m, mini DIN
Краткое описание built for SevenEasy™, SevenMulti™, FiveEasy™ und FiveGo™
Номер заказа 51302255

Описание

     The integrated temperature sensor avoids the need for a separate temperature probe when compensating for the difference in temperature between the sample and reference temperature.
     Two-plate design provides a steady signal for accurate measurement of low conductivity samples.
Glass body is resistant to corrosive and organic sample types.

  • Two plate design
  • Integrated temperature sensor
  • Glass body

InLab®725 Conductivity Probe

16203Designed for bio-ethanol analysis

   A platinum 2-plate conductivity probe with integrated temperature sensor and fixed cable.
   Designed for use with METTLER TOLEDO bench meters SevenExcellence™ and SevenCompact™ for determination of conductivity in bio-ethanol.
  These two meters supports special units required for bio-ethanol analysis. This means unit inter-conversion and recalculation is no longer necessary.

Nominal cell constant: 0.1 /cm

Технические характеристики - InLab®725 Conductivity Probe

Диапазон измерения 0.1 ... 500 µS/cm
Температурный диапазон, °C 0 ... 100
Длина погружной части 120 mm
Диаметр погружной части 12 mm
Материал корпуса Glass 2 plate cell
Кабели и коннекторы 1 m, mini DIN
Краткое описание built for SevenCompact™, SevenMulti™, FiveEasy™ und FiveGo™
Номер заказа 30014160

Описание

     The integrated temperature sensor avoids the need for a separate temperature probe when compensating for the difference in temperature between the sample and reference temperature.
     Two-plate design provides a steady signal for accurate measurement of low conductivity samples.
Glass body is resistant to corrosive and organic sample types.

  • Two plate design
  • Integrated temperature sensor
  • Glass body

InLab®751-4mm Conductivity Probe

24043Micro-conductivity made easy

     The InLab®751-4mm features an integrated temperature probe that automatically captures the sample temperature and corrects results to a defined reference temperature with a shaft diameter of 4 mm. For correct results, immerse the sensor to the minimum immersion level marked on the probe. Recommended for conductivity measurements in life sciences.
Nominal cell constant: 1.0 /cm.
Measuring range: 10 μS/cm - 100 mS/cm.


Технические характеристики - InLab®751-4mm Conductivity Probe

Диапазон измерения 10 µS/cm ... 100 mS/cm
Температурный диапазон, °C 0 ... 100
Длина погружной части 120 mm
Диаметр погружной части 4 mm
Материал корпуса Glass
Кабели и коннекторы 1.0 m cable, Mini-DIN
Датчик температуры NTC 30 kOhm
Номер заказа 51344030

Особенности и преимущества

     The InLab®751-4mm is especially designed for the measurement in small containers. Thanks to its shaft diameter of 4 mm you will get accurate results in low sample volumes as small as 150 µL. With a measuring range of 10 µS/cm to 100 mS/cm the InLab®751-4mm covers the conductivity range typically used in the life sciences. The integrated temperature sensor does away with the need for a separate temperature probe by compensating for the difference in temperature between the sample and reference temperature.

  • 4 mm shaft diameter
  • Indicated minimum immersion depth on sensor shaft
  • 2 platinum poles
  • Integrated NTC 30 kΩ temperature sensor

InLab®752-6mm Conductivity Probe

60482Versatile semi-micro conductivity

     With a measuring range of 10 μS/cm to 112 mS/cm this unique semi-micro conductivity sensor is a real generalist – ideal for direct measurements in test tubes or micro titrations. Its 6 mm diameter allows for a minimum immersion depth of only 15 mm while still being very robust.
Nominal cell constant: 1.0 /cm.

 


Технические характеристики - InLab®752-6mm Conductivity Probe

Диапазон измерения 10 µS/cm ... 112 mS/cm
Температурный диапазон, °C 0 ... 100
Длина погружной части 180 mm
Диаметр погружной части 6 mm
Материал корпуса Glass
Кабели и коннекторы 1.0 m cable, Mini-DIN
Датчик температуры NTC 30 kOhm
Номер заказа 51344031

Особенности и преимущества

     The InLab®752-6mm is especially designed for the measurement in small containers. Thanks to its shaft diameter of 6 mm you will get accurate results in low sample volumes as small as 300 µL. With a measuring range of 10 µS/cm to 112 mS/cm the InLab®752-6mm covers the conductivity range typically used in the life sciences. The integrated temperature sensor does away with the need for a separate temperature probe by compensating for the difference in temperature between the sample and reference temperature.

  • 6 mm shaft diameter
  • Indicated minimum immersion depth on sensor shaft
  • 2 platinum poles
  • Integrated NTC 30 kΩ temperature sensor

950-K19/120/1m/2x-27.4 Conductivity Probe

950_K19_120_1125303730871_jpgConductivity Measurement

INGOLD conductivity cell.
For use with instruments from other manufacturers.
Nominal cell constant: 1.0 /cm

 

 


Технические характеристики - 950-K19/120/1m/2x-27.4 Conductivity Probe

Материал корпуса Polysulfon; 2 platinum poles
Температурный диапазон, °C 0 ... 60
Кабели и коннекторы 1 m; 4 mm banana