В наличии!
      Лаборатория
Предлагаем со склада в Алматы (ссылки):

 

 

 

Делитель проб: аксессуары Rotary Cone Sample Divider LABORETTE 27

Dividing heads incl. glass sample bottles and funnel,
division ratio 1:8

Accessory description

Dividing head POM plastic, division ration 1:8

741c0d6158Order number: 27.1300.00

     POM plastic is recommended for the division of materials and suspensions, which don't produce abrasion at the surface.

Division ratio: 1:8
Number of possible sub-samples: 8
Max. permissible particle size: 10 mm
Max. feed volume: 4,000 ml
Division: dry/wet
Capacity of sample bottles: 25, 250, 500 ml (thread of glass bottles: GL55)

     Equipment: The dividing head is delivered with 8 samples bottles 500 ml with screw lid and funnel 10 mm dia. as standard (included in the price of the dividing head). 

     This dividing head is also available in anodized aluminium (article no. 27.1150.00) for the division of materials and suspensions, which produce abrasion at the surface. 

Element analysis

General specifications

Material POM Polyoxymethylene
ISO/EN/DIN Code DIN 7728 C9021
Chemical composition
Element Formula
Polyoxmethylenecopolymer (Polyacetale) CxH2xOx
Melting point 165° C
max. Application temp. constant 90°
max. Application temp. briefly 140°
Chemical Resistance
Aliphatical hydrocarbon
Aromatical hydrocarbon
Halogenised hydrocarbon
weak acid
strong alkaline solution
Physical and mechanical properties
Density 141,g /cm³
Hardness extremely hard

Accessory description

Dividing head made of aluminium, division ratio 1:8

ad33ec163dOrder number: 27.1150.00

     Anodized aluminium is recommended for the division of materials and suspensions, which produce abrasion at the surface.

Division ratio: 1:8
Number of possible sub-samples: 8
Max. permissible particle size: 10 mm
Max. feed volume: 4,000 ml
Division: dry/wet
Capacity of sample bottles: 25, 250, 500 ml (thread of glass bottles: GL55)

     Equipment: The dividing head is delivered with 8 samples bottles 500 ml with screw lid and funnel 10 mm dia. as standard (included in the price of the dividing head). 

     This dividing head is also available in POM plastic (article no. 27.1300.00) for the division of materials and suspensions, which don't produce abrasion at the surface.

Element analysis

General specifications

Material Aluminium AlMgSi 0,5
ISO/EN/DIN Code 3.3206 /1725
Chemical composition
Element Share %
Iron – Fe 0.1-03
Zinc - Zn 0.15
Silicon – Si 0.3-0.6
Manganese – Mn 0.1
Copper– Cu 0.1
Manganese – Mg 0.35 - 0.60
Chromium – Cr 0.05
Titan – Ti + Zr Circonium 0.1
Physical and mechanical properties
Density 2.7 g/cm³
Hardness 65 HBW

Dividing heads incl. glass sample bottles and funnel,
division ratio 1:10

Accessory description

Dividing head POM plastic, division ration 1:10

2222sfdOrder number: 27.5150.00

     POM plastic is recommended for the division of materials and suspensions, which don't produce abrasion at the surface. 

Division ratio: 1:10
Number of possible sub-samples: 10 Max.
Permissible particle size: 10 mm
Max. feed volume: 2,500 ml
Division: dry/wet
Capacity of sample bottles: 25, 250 ml (thread of glass bottles: GL55) 

     Equipment: The dividing head is delivered with 10 samples bottles 250 ml with screw lid and funnel 10 mm dia. as standard (included in the price of the dividing head). 

     This dividing head is also available in anodized aluminium (article no. 27.4150.00) for the division of materials and suspensions, which produce abrasion at the surface.

Element analysis

General specifications

Material POM Polyoxymethylene
ISO/EN/DIN Code DIN 7728 C9021
Chemical composition
Element Formula
Polyoxmethylenecopolymer (Polyacetale) CxH2xOx
Melting point 165° C
max. Application temp. constant 90°
max. Application temp. briefly 140°
Chemical Resistance
Aliphatical hydrocarbon
Aromatical hydrocarbon
Halogenised hydrocarbon
weak acid
strong alkaline solution
Physical and mechanical properties
Density 141,g /cm³
Hardness extremely hard

Accessory description

Dividing head aluminium, division ratio 1:10

8a6058fb9e111Order number: 27.4150.00

     Anodized aluminium is recommended for the division of materials and suspensions, which produce abrasion at the surface.

Division ratio: 1:10
Number of possible sub-samples: 10
Max. permissible particle size: 10 mm
Max. feed volume: 2,500 ml
Division: dry/wet
Capacity of sample bottles: 25, 250 ml (thread of glass bottles: GL55)

     Equipment: The dividing head is delivered with 10 samples bottles 250 ml with screw lid and funnel 10 mm dia. as standard (included in the price of the dividing head). 

     This dividing head is also available in POM plastic (article no. 27.5150.00) for the division of materials and suspensions, which don't produce abrasion at the surface.

Element analysis

General specifications

Material Aluminium AlMgSi 0,5
ISO/EN/DIN Code 3.3206 /1725
Chemical composition
Element Share %
Iron – Fe 0.1-03
Zinc - Zn 0.15
Silicon – Si 0.3-0.6
Manganese – Mn 0.1
Copper– Cu 0.1
Manganese – Mg 0.35 - 0.60
Chromium – Cr 0.05
Titan – Ti + Zr Circonium 0.1
Physical and mechanical properties
Density 2.7 g/cm³
Hardness 65 HBW

Dividing heads incl. glass sample bottles and funnel,
division ratio 1:30

Accessory description

Dividing head POM plastic, division ration 1:30

217648e2d9Order number: 27.6150.00

     POM plastic is recommended for the division of materials and suspensions, which don't produce abrasion at the surface.

Division ratio: 1:30
Number of possible sub-samples: 3
Max. permissible particle size: 2.5 mm
Max. feed volume: 300 ml
Division: dry/wet
Capacity of sample bottles: 15, 20, 30 ml

     Equipment: The dividing head is delivered with 3 samples bottles 15 ml with screw lid and funnel 10 mm dia. as well as 1 funnel each of 5 mm dia. for dry- resp. wet division as standard (included in the price of the dividing head).

     This dividing head is also available in PTFE coated aluminium (article no. 27.2150.00) for the division of aggressive materials and suspensions, which attack POM plastic and aluminium.

Element analysis

General specifications

Material POM Polyoxymethylene
ISO/EN/DIN Code DIN 7728 C9021
Chemical composition
Element Formula
Polyoxmethylenecopolymer (Polyacetale) CxH2xOx
Melting point 165° C
max. Application temp. constant 90°
max. Application temp. briefly 140°
Chemical Resistance
Aliphatical hydrocarbon
Aromatical hydrocarbon
Halogenised hydrocarbon
weak acid
strong alkaline solution
Physical and mechanical properties
Density 141,g /cm³
Hardness extremely hard

Accessory description

Dividing head PTFE coated aluminium, division ratio 1:30

27.2150.00Order number: 27.2150.00

     PTFE coated aluminium is recommended for the division of aggressive materials and suspensions, which attack POM plastic and aluminium.

Division ratio: 1:30
Number of possible sub-samples: 3
Max. permissible particle size: 2.5 mm
Max. feed volume: 300 ml
Division: dry/wet
Capacity of sample bottles: 15, 20, 30 ml

     Equipment: This dividing head is delivered with 3 samples bottles 15 ml with screw lid and funnel 10 mm dia. as well as 1 funnel each of 5 mm dia. for dry- resp. wet division as standard (included in the price of the dividing head). 

     This dividing head is also available in POM plastics (article no. 27.6150.00) for the division of materials and suspensions, which don't produce abrasion at the surface.

Element analysis

General specifications

Material PTFE
CAS Number 9002-84-0
Chemical composition
Element Formula
Polytetrafluoroethylene 2F4
Melting point 327° C
Max. application temp. constant 260° C
Max. application temp. briefly 300° C
Physical and mechanical properties
Density 2.16 g /cm³
Ball pressure hardness ISO 868, ISO 2039-2, D 55 Shore

Sample bottles

0f018a31f1Accessory description

Sample bottle 250 ml, division ratio 1:8 and 1:10

Order number: 27.1450.00

 

With screw lid, thread of sample bottle GL55 

Can be used with dividing heads, division ratio 1:8 and 1:10.

     Furthermore a sample vessel 25 ml with lid, article-number 83.3190.16, is available, which can be inserted in the sample bottles 250 ml and 500 ml for dividing smallest samplequantities.

 

0f018a31f1Accessory description

Sample bottle 500 ml, division ratio 1:8

Order number: 27.1460.00

With screw lid, thread of sample bottle GL55

Can be used with dividing heads, division ratio 1:8.

     Furthermore a sample vessel 25 mo with lid, article-number 83.3190.16, is available, which can be inserted in the sample bottles 250 ml and 500 ml for dividing smallest sample quantities.

7794de190fAccessory description

Sample vessel 25 ml

Order number: 83.3190.16

 

Sample vessel 25 ml with lid for sample bottle 250 ml and 500 ml 

     For dividing smallest sample quantities, this sample vessel 25 ml can be inserted in the sample bottles 250 ml (article-number 27.1450.00) and sample bottles 500 ml (article-number 27.1460.00).

 

17d0a4aa7aAccessory description

Sample bottle 15 ml, division ratio 1:30

Order number: 83.3100.00

 

With screw lid

Can be used with dividing heads, division ratio 1:30.

 

17d0a4aa7aAccessory description

Sample bottle 20 ml, division ratio 1:30

Order number: 83.3110.00

Can be used with the dividing heads with division ratio 1:30.

17d0a4aa7aAccessory description

Sample bottle 30 ml, division ratio 1:30

Order number: 83.3120.00

Can be used with the dividing heads with division ratio 1:30.

Funnels

Accessory description

Funnel 5 mm dia. made of POM plastic

Trichter_01Order number: 27.1290.16

     The funnel is also offered in 10, 15 and 22 mm dia. to suit the particle size of the sample being divided.
     For the division of suspensions with dividing head, division ratio 1:30 a separate funnel, order no. 27.1330.16 is offered

Accessory description

Funnel 5 mm dia. made of POM plastic

Trichter_01Order number: 27.1330.16

For the division of suspensions with dividing head, division ratio 1:30

     The funnel is also offered in 5, 10 and 15, 22 mm dia. to suit the particle size of the sample being divided.

Accessory description

Funnel 10 mm dia. made of POM plastic

Trichter_01Order number: 27.1200.16

     The funnel is also offered in 5, 15 and 22 mm dia. to suit the particle size of the sample being divided.

 

Accessory description

Funnel 15 mm dia. made of POM plastic

Trichter_01Order number: 27.1210.16

     The funnel is also offered in 5, 10 and 22 mm dia. to suit the particle size of the sample being divided.

Accessory description

Funnel 22 mm dia. made of POM plastic

Trichter_01Order number: 27.1210.16

     The funnel is also offered in 5, 10 and 15 mm dia. to suit the particle size of the sample being divided.

Further accessories

Accessory description

Protective device

Order number: 27.1500.17

Made of colourless polyacryl
Prevents, that somebody can contact the turning dividing head.

Accessories for automatic feeding

Accessory description

Vibratory Feeder LABORETTE 24 with V-shaped channel,
funnel and control unit for 200-240 V/1~

24.0030.004Order number: 24.0030.00

Typical fields of application:
- slow, metered feeding of flowable materials to obtain a narrow, directed sample feed
- should be combined with Rotary Cone Sample Divider LABORETTE 27 and Variable      Speed Rotor Mill PULVERISETTE 14, in order to ensure a continuous and exactly proportioned feeding of the sample.

Method of operation:
     Vibration of a channel of high-grade stainless steel conveys flowable material from a funnel to the open end of the channel in a uniform stream.
     The rate of flow can be controlled by a separate control unit which alters the vibration amplitude of the channel.
     The control of vibrational amplitude is achieved by a microprocessor controlled unit which ensures that even the smallest quantities of material are uniformly conveyed.

Features of performance:
- Channel and funnel of polished high-grade stainless steel
- Microprocessor-controlled electronics
- Easy to clean
- Funnel can be pushed aside
- V-shaped feeder channel for narrow, directed sample feed
- V- and U-channels easy to interchange
- Maintenance-free components
- Separate control unit
- Safety tested (CE mark) 

Equipment: 
     The Vibratory Feeder is delivered with V-shaped channel and funnel standardly, but without a stand, which can be ordered as a accessory, if required. The V-shaped channel can be easily replaced by a wide U-shaped channel for an uniform, broad material bed.

Accessory description

Vibratory Feeder LABORETTE 24 with V-shaped channel,
funnel and control unit for 100-120 V/1~

24.0030.004Order number: 24.0040.00

Typical fields of application:
- slow, metered feeding of flowable materials to obtain a narrow, directed sample feed
- should be combined with Rotary Cone Sample Divider LABORETTE 27 and Variable      Speed Rotor Mill PULVERISETTE 14, in order to ensure a continuous and exactly proportioned feeding of the sample.

Method of operation:
     Vibration of a channel of high-grade stainless steel conveys flowable material from a funnel to the open end of the channel in a uniform stream.
     The rate of flow can be controlled by a separate control unit which alters the vibration amplitude of the channel.
     The control of vibrational amplitude is achieved by a microprocessor controlled unit which ensures that even the smallest quantities of material are uniformly conveyed.

Features of performance:
- Channel and funnel of polished high-grade stainless steel
- Microprocessor-controlled electronics
- Easy to clean
- Funnel can be pushed aside
- V-shaped feeder channel for narrow, directed sample feed
- V- and U-channels easy to interchange
- Maintenance-free components
- Separate control unit
- Safety tested (CE mark)

Equipment:
     The Vibratory Feeder is delivered with V-shaped channel and funnel, but without stand, which can be ordered as accessories, if required.
     The V-shaped channel can be easily replaced by a wide channel for uniform, broad material feed.

24.9100.00456Accessory description

Stand for Vibratory Feeder LABORETTE 24

Order number: 24.9100.00

Solid stand - height adjustable, rotatable, stable