В наличии!
      Лаборатория
Предлагаем со склада в Алматы (ссылки):

 

 

Вибрационные грохоты: аксессуары Vibratory Sieve Shaker ANALYSETTE 3 SPARTAN

Accessories for dry sieving

Accessory description

Clamping lid plexiglas

Siebspanndeckel_Plexiglas1Order number: 31.2020.00

For dry sieving with test sieves 200 mm/8" dia.

The clamping lid made of plexiglas allows the operator to observe the sieving process.

     For applications, where it is not required to observe the sieving process, a clamping lid without window insert article no. 31.2050.00, is also available.

     This clamping lid can also be used if you would like to use the Vibratory Micro Mill PULVERISETTE 0 as a Vibratory Sieve Shaker ANALYSETTE 3 SPARTAN. The needed sieve pan and the sieves must be ordered separately.

Accessory description

Clamping lid polyamide (without window)

9e8e57c1e41Order number: 31.2050.00

For dry sieving for all test sieves up to 200 mm/8" dia.

     The polyamide clamping lid without window for applications, where it is not required to observe the sieving process, respectively in order to sieve materials where a metallic contamination must be avoided. 

     For applications, where it is required to observe the sieving process, a clamping lid with window insert article no. 31.2020.00, is also available.

     This clamping lid can also be used if you would like to use the Vibratory Micro Mill PULVERISETTE 0 as a Vibratory Sieve Shaker ANALYSETTE 3 SPARTAN. The needed sieve pan and the sieves must be ordered separately.

Accessory description

Sieve Tensioning System TorqueMaster incl. clamping lid plexiglas
and electrical tool 100-240 V/1~, 50-60 Hz

TorqueMasterOrder number: 31.2100.00

For dry sieving with test sieves 200 mm/8" dia.

     Consisting of clamping lid plexiglas for test sieves 200 mm and 8" dia. and electrical tool 100 -240 V/1~, 50 -60  Hz

     The sieve tensioning system TorqueMaster enables an automatic, reproducible tensioning of the sieve stack on the sieve shaker. Although the tensioning has a great influence on the result, it is relatively undefined in conventional systems. The unique properties of the TorqueMaster brings constant, reproducible tensioning on the sieve stack through the use of a high-quality electrical tool which results the calibration of sieve tensioning as part of the monitoring of test equipment according to ISO 9001:2000.

     Although you may not have a FRITSCH sieve shaker, the TorqueMaster is the best tensioning system for your sieve stack. TorqueMaster can be attached and used with any sieve shaker.

Accessory description

Clamping lid plexiglas for test sieves 100 mm dia. resp. grinding head
for conversion to Vibratory Micro MIll PULVERISETTE

plexiglasOrder number: 31.2010.00

     Clamping lid plexiglas for dry sieving with test sieves 100 mm dia. and grinding head for conversion of the ANALYSETTE 3 SPARTAN to the PULVERISETTE 0. 

     The clamping lid made of plexiglas allows the operator to observe the sieving process and the ANALYSETTE 3 SPARTAN can be used with this clamping lid as Vibratory Micro Mill PULVERISETTE 0 for milling and homogenising of small quantities of samples (sample quantity: 0.1 - 10 ml, max. feed size: 5 mm, final fineness: 5 - 10 µm).

Accessory description

Interposed sieve pan made of stainless steel 200 mm dia., 50 mm height

9e8e57c1e41

Order number: 31.1300.03

For dry sieving with test sieves 200 mm dia.

     If several sieving operations should be carried out simultaneously, an interposed sieve pan must be used as sieve pan between the sieves.

 

Element analysis

General specifications

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Interposed sieve pan made of stainless steel 8" dia., 2" height

9e8e57c1e41

Order number: 31.1320.03

For dry sieving with test sieves 8" dia.

     If several sieving operations should be carried out simultaneously, an interposed sieve pan must be used as sieve pan between the sieves.

 

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Sieve pan made of stainless steel 200 mm dia., 50 mm height

9e8e57c1e41

Order number: 31.1000.03

For dry sieving with test sieves 200 mm dia.

The sieve pan made of stainless steel completes the sieve stack. 

The sieve pan made of stainless steel is also available in 200 mm dia., 25 mm height.

 

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Sieve pan made of stainless steel 8" dia., 2" height

9e8e57c1e41

Order number: 31.1020.03

For dry sieving with test sieves 8" dia.

The sieve pan made of stainless steel completes the sieve stack. 

This sieve pan made of stainless steel is also available in 8" dia., 1" height.

 

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Sieve pan made of stainless steel 100 mm dia., 40 mm height

9e8e57c1e41

Order number: 31.1040.03

For dry sieving with test sieves 100 mm dia.

The sieve pan made of stainless steel completes the sieve stack.

 

Element analysis

General specifications 

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

Accessories for wet sieving

Accessory description

Clamping lid plexiglas

wet_sieving_head1 Order number: 31.0400.00

With 2 rotation nozzles for wet sieving with test sieves 200 mm/8" dia.

     The wet clamping lid features 2 rotation nozzles which sprays the entire interior chamber, thus helping to flush the material through the sieve apertures.

     Especially recommended for materials with a high electrostatic charge or very high content of fine material.

     This clamping lid can also be used if you would like to use the Vibratory Micro Mill PULVERISETTE 0 as a Vibratory Sieve Shaker ANALYSETTE 3 SPARTAN. The needed sieve pan and the sieves must be ordered separately.

Accessory description

Sieve pan made of stainless steel with outlet 200 mm dia., 50 mm height

9e8e57c1e41Order number: 31.1100.03

For wet sieving with test sieves 200 mm dia. 

The sieve pan made of stainless steel with outlet completes the sieve stack.

This sieve pan made of stainless steel with outlet is also available in 200 mm dia., 25 mm height.

 

Element analysis

General specifications

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

45a2abdb3eAccessory description

Interposed sieving ring with 3 nozzles

Order number: 31.0240.00

For wet sieving with test sieves 200 mm dia. 

For simultaneous spraying the sieves above and below.

 

Element analysis

General specifications

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Sieve pan made of stainless steel with outlet 8" dia., 2" height

9e8e57c1e41Order number: 31.1120.03

For wet sieving with test sieves 8" dia.

The sieve pan made of stainless steel with outlet completes the sieve stack.

This sieve pan made of stainless steel with outlet is also available in 8" dia., 1" height.

 

Element analysis

General specifications

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

cf3f4cfcad

Accessory description

Interposed sieving ring with 3 nozzles

Order number: 31.0250.00

For wet sieving with test sieves 8" dia.

For simultaneous spraying the sieves above and below.

 

Element analysis

General specifications

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Clamping lid plexiglas

da17fb308b_02Order number: 31.2040.00

With 1 nozzles for wet sieving with test sieves 100 mm dia.

     The wet clamping lid features 1 nozzle which sprays the entire interior chamber, thus helping to flush the material through the sieve apertures.

     Especially recommended for materials with a high electrostatic charge or very high content of fine material. 

     This clamping lid can also be used if you would like to use the Vibratory Micro Mill PULVERISETTE 0 as a Vibratory Sieve Shaker ANALYSETTE 3 SPARTAN. The needed sieve pan and sieves must be ordered separately.

Accessory description

Sieve pan made of stainless steel with
outlet 100 mm dia., 40 mm height

9e8e57c1e41Order number: 31.1140.00

For wet sieving with test sieves 100 mm dia. 

The sieve pan made of stainless steel with outlet completes the sieve stack.

 

Element analysis 

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

Certification

Accessory description

IQ/OQ documentation for FRITSCH Sieve Shaker
ANALYSETTE 3 SPARTAN

Order number: 96.0100.00

     Protocol for "Installation Qualifications and Operating Qualifications" in questionnaire format (implementation not included). 

     For the independent utilization for the support of instrument qualification in the quality management system for the FRITSCH Vibratory Sieve Shaker ANALYSETTE 3 SPARTAN.

Accessory description

Inspection certificate 3.1 EN 10204 for FRITSCH test 
sieves according to ISO 3310-1

31.0900.0022Order number: 31.0900.00

Inspection certificate 3.1 EN 10204 for test sieves according to ISO 3310-1

     The inspection certificate 3.1 EN 10204 is essential when using the test sieves as testing equipment in accordance with DIN EN ISO 9001.

     Of course, we would also be happy to recertify your FRITSCH test sieves according to ISO 3310-1 at our headquarters in Idar-Oberstein.

Please note: if necessary please order together with each test sieve.

Accessories for automatic evaluation of sieve analysis

Accessory description

Software AUTOSIEVE for Windows

Order number: 03.2900.00

Software AUTOSIEVE for Windows

Multilingual AUTOSIEVE programme for automatic evaluation, simple monitoring and documentation of sieving results.

Supplied on a practical USB stick, very quickly installed.

     Simply connect a laboratory analysis balance and then weigh the sieves before and after sieving using differential weighing. AUTOSIEVE will do the rest.

     The software is suitable for Windows 7, XP and Vista, enables simple saving and retrieving of empty sieve weights, both of single sieves and complete sieve sets.

     Laboratory analysis balance, computer, colour ink jet printer and laser printer for the Heavy Duty Analytical Sieve Shaker ANALYSETTE 18 on request.

Laboratory analysis balance for the:

Vibratory Sieve Shaker ANALYSETTE 3 PRO

Vibratory Sieve Shaker ANALYSETTE 3 SPARTAN

Accessory description

Laboratory analysis balance

03.2600.00Order number: 03.2600.00

     Up to 4.1 kg (± 0.01 g) with RS232 interface, incl. computer connection cable for automatic sieve evaluation.

     The control and evaluation software AUTOSIEVE for WindowsTM can be ordered with each Sieve Shaker for automatic sieve evaluation - (order no. 03.2900.00). This requires a special laboratory analysis balance, which you can order under the above mentioned order number 03.2600.00.

Sieving aids

Accessory description

Grinding ball agate, 5 mm dia., polished

Mahlkugeln_1611Order number: 55.0050.05 

General material specification:
Material: agate - SiO2
Abrasion resistance: good
Suitable for: soft to medium-hard sample
Detailed information about the material you will find in the element analysis.

     100 grinding balls made of agate with 5 mm dia. weigh approx. 17 g. Due to the indication of weight, the high number of balls per grinding bowl can be weight.

     Grinding balls made of agate with 5 mm dia. are also recommended as sieving aid for dry sieving of material with a high proportion of fine particles.
     Recommended number per sieve: 15 pieces.

Recommended number of balls per grinding bowl 

Grinding bowl 500 ml 250 ml 80 ml 45 ml 20 ml 12 ml
Useful capacity (grinding material) 80 – 225 ml 30 – 125 ml 10 – 30 ml 3 - 20 ml 1 – 9 ml 0.5 – 5 ml
Balls diameter 5 mm 2000 1200 250 180 80 50
Recommended number of balls per grinding bowl
Grinding bowl 15 ml 10 ml 5 ml
Useful capacity (grinding material) 0.5 – 5 ml 0.2 – 1 ml 0.1 – 1 ml
Balls diameter 5 mm 60 30 20

Element analysis

General specifications

Material Agate – SiO2
Chemical composition
Element Share %
Silicon oxide– SiO2 99.9
Aluminium – Al2O3 < 0.02
Iron oxide – Fe2O3 < 0.02
Calcium oxide – CaO < 0.02
Magnesium – MgO < 0.02
Sodium carbonate – Na2O < 0.02
Potassium carbonate – K2O < 0.02
Manganese oxide – MnO < 0.02
Physical and mechanical properties
Density 2.65 g/cm³
Hardness 6.5 – 7 Mohs

Accessory description

Grinding ball agate, 10 mm dia., polished

Mahlkugeln_1611Order number: 55.0100.05

General material specification:
Material: agate - SiO2
Abrasion resistance: good
Suitable for: soft to medium-hard sample
Detailed information about the material you will find in the element analysis.

     Grinding balls made of agate with 10 mm dia. are also recommended as sieving aid for dry sieving of material with a high proportion of fine particles.
Recommended number per sieve: 10 pieces.

Recommended number of balls per grinding bowl 

Grinding bowl 500 ml 250 ml 80 ml 45 ml 20 ml 12 ml
Useful capacity (grinding material) 80 – 225 ml 30 – 125 ml 10 – 30 ml 3 - 20 ml 1 – 9 ml 0.5 – 5 ml
Balls diameter 5 mm 100 50 30 18 10 6
Recommended number of balls per grinding bowl
Grinding bowl 15 ml 10 ml 5 ml
Useful capacity (grinding material) 0.5 – 5 ml 0.2 – 1 ml 0.1 – 1 ml
Balls diameter 5 mm 5 3 1

Element analysis

General specifications

Material Agate – SiO2
Chemical composition
Element Share %
Silicon oxide– SiO2 99.9
Aluminium – Al2O3 < 0.02
Iron oxide – Fe2O3 < 0.02
Calcium oxide – CaO < 0.02
Magnesium – MgO < 0.02
Sodium carbonate – Na2O < 0.02
Potassium carbonate – K2O < 0.02
Manganese oxide – MnO < 0.02
Physical and mechanical properties
Density 2.65 g/cm³
Hardness 6.5 – 7 Mohs

GummikugelAccessory description

Rubber ball 20 mm dia.

 Order number: 31.0180.15

 Are recommended as sieving aids for dry sieving of materials with a high proportion of fine particles.

 Recommended quantity per sieve: 5 pieces

Test sieves made of stainless steel, 200 mm diameter, 50 mm high 
according 
to ISO 3310-1 with compliance certificate

Accessory description

Test sieve, mesh width 63 mm, ISO 3310-1

2_SiebeOrder number: 30.0000.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 45 mm, ISO 3310-1

2_SiebeOrder number: 30.0080.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 31.5 mm, ISO 3310-1

2_SiebeOrder number: 30.0100.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 25 mm, ISO 3310-1

2_SiebeOrder number: 30.0200.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 22.4 mm, ISO 3310-1

2_SiebeOrder number: 30.0300.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 20 mm, ISO 3310-1

2_SiebeOrder number: 30.0400.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 19 mm, ISO 3310-1

2_SiebeOrder number: 30.0500.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 18 mm, ISO 3310-1

2_SiebeOrder number: 30.0600.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 16 mm, ISO 3310-1

2_SiebeOrder number: 30.0800.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 14 mm, ISO 3310-1

2_SiebeOrder number: 30.0900.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 12.5 mm, ISO 3310-1

2_SiebeOrder number: 30.1000.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 11.2 mm, ISO 3310-1

2_SiebeOrder number: 30.1100.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 10 mm, ISO 3310-1

2_SiebeOrder number: 30.1200.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 9 mm, ISO 3310-1

2_SiebeOrder number: 30.1300.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 8 mm, ISO 3310-1

2_SiebeOrder number: 30.1400.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 7.1 mm, ISO 3310-1

2_SiebeOrder number: 30.1500.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 6.3 mm, ISO 3310-1

2_SiebeOrder number: 30.1600.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 5.6 mm, ISO 3310-1

2_SiebeOrder number: 30.1700.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 5 mm, ISO 3310-1

2_SiebeOrder number: 30.1800.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 4.5 mm, ISO 3310-1

2_SiebeOrder number: 30.1900.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 4 mm, ISO 3310-1

2_SiebeOrder number: 30.2000.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 3.55 mm, ISO 3310-1

2_SiebeOrder number: 30.2100.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 3.15 mm, ISO 3310-1

2_SiebeOrder number: 30.2200.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 2.8 mm, ISO 3310-1

2_SiebeOrder number: 30.2300.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 2.5 mm, ISO 3310-1

2_SiebeOrder number: 30.2400.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 2.24 mm, ISO 3310-1

2_SiebeOrder number: 30.2500.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 2 mm, ISO 3310-1

2_SiebeOrder number: 30.2600.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 1.8 mm, ISO 3310-1

2_SiebeOrder number: 30.2700.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 1.6 mm, ISO 3310-1

2_SiebeOrder number: 30.2800.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 1.4 mm, ISO 3310-1

2_SiebeOrder number: 30.2900.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 1.25 mm, ISO 3310-1

2_SiebeOrder number: 30.3000.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 1.12 mm, ISO 3310-1

2_SiebeOrder number: 30.3100.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 1 mm, ISO 3310-1

2_SiebeOrder number: 30.3200.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

     If the test sieve is desired in other sizes as 200 mm dia., 50 mm height, the order-number must be changed as follow:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 900 µm, ISO 3310-1

2_SiebeOrder number: 30.3300.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 850 µm, ISO 3310-1

2_SiebeOrder number: 30.3450.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 800 µm, ISO 3310-1

2_SiebeOrder number: 30.3400.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 710 µm, ISO 3310-1

2_SiebeOrder number: 30.3500.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 630 µm, ISO 3310-1

2_SiebeOrder number: 30.3600.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 600 µm, ISO 3310-1

2_SiebeOrder number: 30.3650.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 560 µm, ISO 3310-1

2_SiebeOrder number: 30.3700.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 500 µm, ISO 3310-1

2_SiebeOrder number: 30.3800.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 450 µm, ISO 3310-1

2_SiebeOrder number: 30.3900.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 400 µm, ISO 3310-1

2_SiebeOrder number: 30.4000.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 355 µm, ISO 3310-1

2_SiebeOrder number: 30.4100.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 315 µm, ISO 3310-1

2_SiebeOrder number: 30.4200.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 300 µm, ISO 3310-1

2_SiebeOrder number: 30.4250.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 280 µm, ISO 3310-1

2_SiebeOrder number: 30.4300.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 250 µm, ISO 3310-1

2_SiebeOrder number: 30.4400.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 224 µm, ISO 3310-1

2_SiebeOrder number: 30.4500.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 212 µm, ISO 3310-1

2_SiebeOrder number: 30.4550.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 200 µm, ISO 3310-1

2_SiebeOrder number: 30.4600.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 180 µm, ISO 3310-1

2_SiebeOrder number: 30.4700.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 160 µm, ISO 3310-1

2_SiebeOrder number: 30.4800.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 150 µm, ISO 3310-1

2_SiebeOrder number: 30.4850.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 140 µm, ISO 3310-1

2_SiebeOrder number: 30.4900.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 125 µm, ISO 3310-1

2_SiebeOrder number: 30.5000.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 112 µm, ISO 3310-1

2_SiebeOrder number: 30.5100.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 106 µm, ISO 3310-1

2_SiebeOrder number: 30.5150.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 100 µm, ISO 3310-1

2_SiebeOrder number: 30.5200.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 90 µm, ISO 3310-1

2_SiebeOrder number: 30.5400.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 80 µm, ISO 3310-1

2_SiebeOrder number: 30.5600.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 75 µm, ISO 3310-1

2_SiebeOrder number: 30.5700.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 71 µm, ISO 3310-1

2_SiebeOrder number: 30.5800.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 63 µm, ISO 3310-1

2_SiebeOrder number: 30.6000.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 56 µm, ISO 3310-1

2_SiebeOrder number: 30.6200.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 53 µm, ISO 3310-1

2_SiebeOrder number: 30.6300.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 50 µm, ISO 3310-1

2_SiebeOrder number: 30.6400.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 45 µm, ISO 3310-1

2_SiebeOrder number: 30.6600.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 40 µm, ISO 3310-1

2_SiebeOrder number: 30.6800.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 38 µm, ISO 3310-1

2_SiebeOrder number: 30.6900.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 36 µm, ISO 3310-1

2_SiebeOrder number: 30.7000.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 32 µm, ISO 3310-1

2_SiebeOrder number: 30.7200.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 25 µm, ISO 3310-1

2_SiebeOrder number: 30.7600.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width 20 µm, ISO 3310-1

2_SiebeOrder number: 30.7800.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ISO 3310-1
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard sieve size ISO 3310-1 mesh width mm/µm

Test sieve 
mesh width 5 mm

200 mm dia., 
height 50 mm 
= standard size

For example 30.1800.03
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 30.1810.03
8”dia., height 2” Replace 5th position = ”0“ in the order no. by ”2“ For example 30.1820.03
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“ For example 30.1840.03

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Test sieves made of stainless steel, 200 mm diameter, 50 mm high 
according to ASTM E-11-1995, with compliance certificate

Accessory description

Test sieve, mesh width ASTM 1" = 25 mm

2_SiebeOrder number: 35.0200.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ASTM-E-1995 mesh
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard
sieve size
ASTM E-11-1995 mesh
Test sieve 
5 mm mesh width, 

200 mm dia., 
height 50 mm 
= standard size
For example 35.1800.03
Test sieve
5 mm mesh width, 
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 35.1810.03
Test sieve 
5 mm mesh width, 
8”dia., height 2”
Replace 5th position = ”0“ in the order no. by ”2“ For example 35.1820.03
Test sieve
5 mm mesh width,
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“      For example 35.1840.03    

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width ASTM 7/8" = 22.4 mm

2_SiebeOrder number: 35.0300.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ASTM-E-1995 mesh
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard
sieve size
ASTM E-11-1995 mesh
Test sieve 
5 mm mesh width, 

200 mm dia., 
height 50 mm 
= standard size
For example 35.1800.03
Test sieve
5 mm mesh width, 
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 35.1810.03
Test sieve 
5 mm mesh width, 
8”dia., height 2”
Replace 5th position = ”0“ in the order no. by ”2“ For example 35.1820.03
Test sieve
5 mm mesh width,
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“      For example 35.1840.03    

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width ASTM 3/4" = 19 mm

2_SiebeOrder number: 35.0600.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ASTM-E-1995 mesh
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard
sieve size
ASTM E-11-1995 mesh
Test sieve 
5 mm mesh width, 

200 mm dia., 
height 50 mm 
= standard size
For example 35.1800.03
Test sieve
5 mm mesh width, 
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 35.1810.03
Test sieve 
5 mm mesh width, 
8”dia., height 2”
Replace 5th position = ”0“ in the order no. by ”2“ For example 35.1820.03
Test sieve
5 mm mesh width,
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“      For example 35.1840.03    

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width ASTM 5/8" = 16 mm

2_SiebeOrder number: 35.0800.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ASTM-E-1995 mesh
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard
sieve size
ASTM E-11-1995 mesh
Test sieve 
5 mm mesh width, 

200 mm dia., 
height 50 mm 
= standard size
For example 35.1800.03
Test sieve
5 mm mesh width, 
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 35.1810.03
Test sieve 
5 mm mesh width, 
8”dia., height 2”
Replace 5th position = ”0“ in the order no. by ”2“ For example 35.1820.03
Test sieve
5 mm mesh width,
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“      For example 35.1840.03    

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width ASTM 0.53" = 13.2 mm

2_SiebeOrder number: 35.0900.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ASTM-E-1995 mesh
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard
sieve size
ASTM E-11-1995 mesh
Test sieve 
5 mm mesh width, 

200 mm dia., 
height 50 mm 
= standard size
For example 35.1800.03
Test sieve
5 mm mesh width, 
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 35.1810.03
Test sieve 
5 mm mesh width, 
8”dia., height 2”
Replace 5th position = ”0“ in the order no. by ”2“ For example 35.1820.03
Test sieve
5 mm mesh width,
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“      For example 35.1840.03    

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width ASTM 1/2" = 12.5 mm

2_SiebeOrder number: 35.1000.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ASTM-E-1995 mesh
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard
sieve size
ASTM E-11-1995 mesh
Test sieve 
5 mm mesh width, 

200 mm dia., 
height 50 mm 
= standard size
For example 35.1800.03
Test sieve
5 mm mesh width, 
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 35.1810.03
Test sieve 
5 mm mesh width, 
8”dia., height 2”
Replace 5th position = ”0“ in the order no. by ”2“ For example 35.1820.03
Test sieve
5 mm mesh width,
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“      For example 35.1840.03    

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width ASTM 7/16" = 11.2 mm

2_SiebeOrder number: 35.1100.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ASTM-E-1995 mesh
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard
sieve size
ASTM E-11-1995 mesh
Test sieve 
5 mm mesh width, 

200 mm dia., 
height 50 mm 
= standard size
For example 35.1800.03
Test sieve
5 mm mesh width, 
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 35.1810.03
Test sieve 
5 mm mesh width, 
8”dia., height 2”
Replace 5th position = ”0“ in the order no. by ”2“ For example 35.1820.03
Test sieve
5 mm mesh width,
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“      For example 35.1840.03    

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width ASTM 3/8" = 9.5 mm

2_SiebeOrder number: 35.1200.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ASTM-E-1995 mesh
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard
sieve size
ASTM E-11-1995 mesh
Test sieve 
5 mm mesh width, 

200 mm dia., 
height 50 mm 
= standard size
For example 35.1800.03
Test sieve
5 mm mesh width, 
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 35.1810.03
Test sieve 
5 mm mesh width, 
8”dia., height 2”
Replace 5th position = ”0“ in the order no. by ”2“ For example 35.1820.03
Test sieve
5 mm mesh width,
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“      For example 35.1840.03    

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width ASTM 5/16" = 8 mm

2_SiebeOrder number: 35.1400.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ASTM-E-1995 mesh
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard
sieve size
ASTM E-11-1995 mesh
Test sieve 
5 mm mesh width, 

200 mm dia., 
height 50 mm 
= standard size
For example 35.1800.03
Test sieve
5 mm mesh width, 
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 35.1810.03
Test sieve 
5 mm mesh width, 
8”dia., height 2”
Replace 5th position = ”0“ in the order no. by ”2“ For example 35.1820.03
Test sieve
5 mm mesh width,
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“      For example 35.1840.03    

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width ASTM 0.265" = 6.7 mm

2_SiebeOrder number: 35.1500.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ASTM-E-1995 mesh
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard
sieve size
ASTM E-11-1995 mesh
Test sieve 
5 mm mesh width, 

200 mm dia., 
height 50 mm 
= standard size
For example 35.1800.03
Test sieve
5 mm mesh width, 
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 35.1810.03
Test sieve 
5 mm mesh width, 
8”dia., height 2”
Replace 5th position = ”0“ in the order no. by ”2“ For example 35.1820.03
Test sieve
5 mm mesh width,
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“      For example 35.1840.03    

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width ASTM 1/4" = 6.3 mm

2_SiebeOrder number: 35.1600.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ASTM-E-1995 mesh
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard
sieve size
ASTM E-11-1995 mesh
Test sieve 
5 mm mesh width, 

200 mm dia., 
height 50 mm 
= standard size
For example 35.1800.03
Test sieve
5 mm mesh width, 
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 35.1810.03
Test sieve 
5 mm mesh width, 
8”dia., height 2”
Replace 5th position = ”0“ in the order no. by ”2“ For example 35.1820.03
Test sieve
5 mm mesh width,
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“      For example 35.1840.03    

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width ASTM 3 1/2 = 5.6 mm

2_SiebeOrder number: 35.1700.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ASTM-E-1995 mesh
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard
sieve size
ASTM E-11-1995 mesh
Test sieve 
5 mm mesh width, 

200 mm dia., 
height 50 mm 
= standard size
For example 35.1800.03
Test sieve
5 mm mesh width, 
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 35.1810.03
Test sieve 
5 mm mesh width, 
8”dia., height 2”
Replace 5th position = ”0“ in the order no. by ”2“ For example 35.1820.03
Test sieve
5 mm mesh width,
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“      For example 35.1840.03    

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width ASTM 4 = 4.75 mm

2_SiebeOrder number: 35.1800.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ASTM-E-1995 mesh
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard
sieve size
ASTM E-11-1995 mesh
Test sieve 
5 mm mesh width, 

200 mm dia., 
height 50 mm 
= standard size
For example 35.1800.03
Test sieve
5 mm mesh width, 
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 35.1810.03
Test sieve 
5 mm mesh width, 
8”dia., height 2”
Replace 5th position = ”0“ in the order no. by ”2“ For example 35.1820.03
Test sieve
5 mm mesh width,
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“      For example 35.1840.03    

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width ASTM 5 = 4 mm

2_SiebeOrder number: 35.2000.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ASTM-E-1995 mesh
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard
sieve size
ASTM E-11-1995 mesh
Test sieve 
5 mm mesh width, 

200 mm dia., 
height 50 mm 
= standard size
For example 35.1800.03
Test sieve
5 mm mesh width, 
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 35.1810.03
Test sieve 
5 mm mesh width, 
8”dia., height 2”
Replace 5th position = ”0“ in the order no. by ”2“ For example 35.1820.03
Test sieve
5 mm mesh width,
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“      For example 35.1840.03    

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width ASTM 6 = 3.35 mm

2_SiebeOrder number: 35.2100.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ASTM-E-1995 mesh
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard
sieve size
ASTM E-11-1995 mesh
Test sieve 
5 mm mesh width, 

200 mm dia., 
height 50 mm 
= standard size
For example 35.1800.03
Test sieve
5 mm mesh width, 
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 35.1810.03
Test sieve 
5 mm mesh width, 
8”dia., height 2”
Replace 5th position = ”0“ in the order no. by ”2“ For example 35.1820.03
Test sieve
5 mm mesh width,
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“      For example 35.1840.03    

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width ASTM 7 = 2.8 mm

2_SiebeOrder number: 35.2300.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ASTM-E-1995 mesh
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard
sieve size
ASTM E-11-1995 mesh
Test sieve 
5 mm mesh width, 

200 mm dia., 
height 50 mm 
= standard size
For example 35.1800.03
Test sieve
5 mm mesh width, 
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 35.1810.03
Test sieve 
5 mm mesh width, 
8”dia., height 2”
Replace 5th position = ”0“ in the order no. by ”2“ For example 35.1820.03
Test sieve
5 mm mesh width,
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“      For example 35.1840.03    

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width ASTM 8 = 2.36 mm

2_SiebeOrder number: 35.2400.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ASTM-E-1995 mesh
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard
sieve size
ASTM E-11-1995 mesh
Test sieve 
5 mm mesh width, 

200 mm dia., 
height 50 mm 
= standard size
For example 35.1800.03
Test sieve
5 mm mesh width, 
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 35.1810.03
Test sieve 
5 mm mesh width, 
8”dia., height 2”
Replace 5th position = ”0“ in the order no. by ”2“ For example 35.1820.03
Test sieve
5 mm mesh width,
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“      For example 35.1840.03    

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width ASTM 10 = 2 mm

2_SiebeOrder number: 35.2600.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ASTM-E-1995 mesh
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard
sieve size
ASTM E-11-1995 mesh
Test sieve 
5 mm mesh width, 

200 mm dia., 
height 50 mm 
= standard size
For example 35.1800.03
Test sieve
5 mm mesh width, 
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 35.1810.03
Test sieve 
5 mm mesh width, 
8”dia., height 2”
Replace 5th position = ”0“ in the order no. by ”2“ For example 35.1820.03
Test sieve
5 mm mesh width,
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“      For example 35.1840.03    

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width ASTM 12 = 1.7 mm

2_SiebeOrder number: 35.2800.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ASTM-E-1995 mesh
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard
sieve size
ASTM E-11-1995 mesh
Test sieve 
5 mm mesh width, 

200 mm dia., 
height 50 mm 
= standard size
For example 35.1800.03
Test sieve
5 mm mesh width, 
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 35.1810.03
Test sieve 
5 mm mesh width, 
8”dia., height 2”
Replace 5th position = ”0“ in the order no. by ”2“ For example 35.1820.03
Test sieve
5 mm mesh width,
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“      For example 35.1840.03    

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width ASTM 14 = 1.4 mm

2_SiebeOrder number: 35.2900.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ASTM-E-1995 mesh
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard
sieve size
ASTM E-11-1995 mesh
Test sieve 
5 mm mesh width, 

200 mm dia., 
height 50 mm 
= standard size
For example 35.1800.03
Test sieve
5 mm mesh width, 
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 35.1810.03
Test sieve 
5 mm mesh width, 
8”dia., height 2”
Replace 5th position = ”0“ in the order no. by ”2“ For example 35.1820.03
Test sieve
5 mm mesh width,
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“      For example 35.1840.03    

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width ASTM 16 = 1.18 mm

2_SiebeOrder number: 35.3000.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ASTM-E-1995 mesh
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard
sieve size
ASTM E-11-1995 mesh
Test sieve 
5 mm mesh width, 

200 mm dia., 
height 50 mm 
= standard size
For example 35.1800.03
Test sieve
5 mm mesh width, 
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 35.1810.03
Test sieve 
5 mm mesh width, 
8”dia., height 2”
Replace 5th position = ”0“ in the order no. by ”2“ For example 35.1820.03
Test sieve
5 mm mesh width,
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“      For example 35.1840.03    

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width ASTM 18 = 1 mm

2_SiebeOrder number: 35.3200.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ASTM-E-1995 mesh
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard
sieve size
ASTM E-11-1995 mesh
Test sieve 
5 mm mesh width, 

200 mm dia., 
height 50 mm 
= standard size
For example 35.1800.03
Test sieve
5 mm mesh width, 
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 35.1810.03
Test sieve 
5 mm mesh width, 
8”dia., height 2”
Replace 5th position = ”0“ in the order no. by ”2“ For example 35.1820.03
Test sieve
5 mm mesh width,
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“      For example 35.1840.03    

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width ASTM 18 = 850 µm

2_SiebeOrder number: 35.3400.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ASTM-E-1995 mesh
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard
sieve size
ASTM E-11-1995 mesh
Test sieve 
5 mm mesh width, 

200 mm dia., 
height 50 mm 
= standard size
For example 35.1800.03
Test sieve
5 mm mesh width, 
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 35.1810.03
Test sieve 
5 mm mesh width, 
8”dia., height 2”
Replace 5th position = ”0“ in the order no. by ”2“ For example 35.1820.03
Test sieve
5 mm mesh width,
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“      For example 35.1840.03    

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width ASTM 25 = 710 µm

2_SiebeOrder number: 35.3500.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ASTM-E-1995 mesh
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard
sieve size
ASTM E-11-1995 mesh
Test sieve 
5 mm mesh width, 

200 mm dia., 
height 50 mm 
= standard size
For example 35.1800.03
Test sieve
5 mm mesh width, 
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 35.1810.03
Test sieve 
5 mm mesh width, 
8”dia., height 2”
Replace 5th position = ”0“ in the order no. by ”2“ For example 35.1820.03
Test sieve
5 mm mesh width,
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“      For example 35.1840.03    

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width ASTM 30 = 600 µm

2_SiebeOrder number: 35.3600.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ASTM-E-1995 mesh
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard
sieve size
ASTM E-11-1995 mesh
Test sieve 
5 mm mesh width, 

200 mm dia., 
height 50 mm 
= standard size
For example 35.1800.03
Test sieve
5 mm mesh width, 
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 35.1810.03
Test sieve 
5 mm mesh width, 
8”dia., height 2”
Replace 5th position = ”0“ in the order no. by ”2“ For example 35.1820.03
Test sieve
5 mm mesh width,
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“      For example 35.1840.03    

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width ASTM 35 = 500 µm

2_SiebeOrder number: 35.3800.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ASTM-E-1995 mesh
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard
sieve size
ASTM E-11-1995 mesh
Test sieve 
5 mm mesh width, 

200 mm dia., 
height 50 mm 
= standard size
For example 35.1800.03
Test sieve
5 mm mesh width, 
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 35.1810.03
Test sieve 
5 mm mesh width, 
8”dia., height 2”
Replace 5th position = ”0“ in the order no. by ”2“ For example 35.1820.03
Test sieve
5 mm mesh width,
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“      For example 35.1840.03    

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width ASTM 40 = 425 µm

2_SiebeOrder number: 35.4000.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ASTM-E-1995 mesh
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard
sieve size
ASTM E-11-1995 mesh
Test sieve 
5 mm mesh width, 

200 mm dia., 
height 50 mm 
= standard size
For example 35.1800.03
Test sieve
5 mm mesh width, 
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 35.1810.03
Test sieve 
5 mm mesh width, 
8”dia., height 2”
Replace 5th position = ”0“ in the order no. by ”2“ For example 35.1820.03
Test sieve
5 mm mesh width,
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“      For example 35.1840.03    

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width ASTM 45 = 355 µm

2_SiebeOrder number: 35.4100.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ASTM-E-1995 mesh
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard
sieve size
ASTM E-11-1995 mesh
Test sieve 
5 mm mesh width, 

200 mm dia., 
height 50 mm 
= standard size
For example 35.1800.03
Test sieve
5 mm mesh width, 
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 35.1810.03
Test sieve 
5 mm mesh width, 
8”dia., height 2”
Replace 5th position = ”0“ in the order no. by ”2“ For example 35.1820.03
Test sieve
5 mm mesh width,
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“      For example 35.1840.03    

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width ASTM 50 = 300 µm

2_SiebeOrder number: 35.4200.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ASTM-E-1995 mesh
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard
sieve size
ASTM E-11-1995 mesh
Test sieve 
5 mm mesh width, 

200 mm dia., 
height 50 mm 
= standard size
For example 35.1800.03
Test sieve
5 mm mesh width, 
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 35.1810.03
Test sieve 
5 mm mesh width, 
8”dia., height 2”
Replace 5th position = ”0“ in the order no. by ”2“ For example 35.1820.03
Test sieve
5 mm mesh width,
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“      For example 35.1840.03    

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width ASTM 60 = 250 µm

2_SiebeOrder number: 35.4400.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ASTM-E-1995 mesh
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard
sieve size
ASTM E-11-1995 mesh
Test sieve 
5 mm mesh width, 

200 mm dia., 
height 50 mm 
= standard size
For example 35.1800.03
Test sieve
5 mm mesh width, 
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 35.1810.03
Test sieve 
5 mm mesh width, 
8”dia., height 2”
Replace 5th position = ”0“ in the order no. by ”2“ For example 35.1820.03
Test sieve
5 mm mesh width,
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“      For example 35.1840.03    

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width ASTM 70 = 212 µm

2_SiebeOrder number: 35.4600.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ASTM-E-1995 mesh
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard
sieve size
ASTM E-11-1995 mesh
Test sieve 
5 mm mesh width, 

200 mm dia., 
height 50 mm 
= standard size
For example 35.1800.03
Test sieve
5 mm mesh width, 
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 35.1810.03
Test sieve 
5 mm mesh width, 
8”dia., height 2”
Replace 5th position = ”0“ in the order no. by ”2“ For example 35.1820.03
Test sieve
5 mm mesh width,
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“      For example 35.1840.03    

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width ASTM 80 = 180 µm

2_SiebeOrder number: 35.4700.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ASTM-E-1995 mesh
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard
sieve size
ASTM E-11-1995 mesh
Test sieve 
5 mm mesh width, 

200 mm dia., 
height 50 mm 
= standard size
For example 35.1800.03
Test sieve
5 mm mesh width, 
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 35.1810.03
Test sieve 
5 mm mesh width, 
8”dia., height 2”
Replace 5th position = ”0“ in the order no. by ”2“ For example 35.1820.03
Test sieve
5 mm mesh width,
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“      For example 35.1840.03    

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width ASTM 100 = 150 µm

2_SiebeOrder number: 35.4800.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ASTM-E-1995 mesh
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard
sieve size
ASTM E-11-1995 mesh
Test sieve 
5 mm mesh width, 

200 mm dia., 
height 50 mm 
= standard size
For example 35.1800.03
Test sieve
5 mm mesh width, 
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 35.1810.03
Test sieve 
5 mm mesh width, 
8”dia., height 2”
Replace 5th position = ”0“ in the order no. by ”2“ For example 35.1820.03
Test sieve
5 mm mesh width,
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“      For example 35.1840.03    

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width ASTM 120 = 125 µm

2_SiebeOrder number: 35.5000.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ASTM-E-1995 mesh
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard
sieve size
ASTM E-11-1995 mesh
Test sieve 
5 mm mesh width, 

200 mm dia., 
height 50 mm 
= standard size
For example 35.1800.03
Test sieve
5 mm mesh width, 
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 35.1810.03
Test sieve 
5 mm mesh width, 
8”dia., height 2”
Replace 5th position = ”0“ in the order no. by ”2“ For example 35.1820.03
Test sieve
5 mm mesh width,
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“      For example 35.1840.03    

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width ASTM 140 = 106 µm

2_SiebeOrder number: 35.5200.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ASTM-E-1995 mesh
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard
sieve size
ASTM E-11-1995 mesh
Test sieve 
5 mm mesh width, 

200 mm dia., 
height 50 mm 
= standard size
For example 35.1800.03
Test sieve
5 mm mesh width, 
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 35.1810.03
Test sieve 
5 mm mesh width, 
8”dia., height 2”
Replace 5th position = ”0“ in the order no. by ”2“ For example 35.1820.03
Test sieve
5 mm mesh width,
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“      For example 35.1840.03    

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width ASTM 170 = 90 µm

2_SiebeOrder number: 35.5400.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ASTM-E-1995 mesh
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard
sieve size
ASTM E-11-1995 mesh
Test sieve 
5 mm mesh width, 

200 mm dia., 
height 50 mm 
= standard size
For example 35.1800.03
Test sieve
5 mm mesh width, 
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 35.1810.03
Test sieve 
5 mm mesh width, 
8”dia., height 2”
Replace 5th position = ”0“ in the order no. by ”2“ For example 35.1820.03
Test sieve
5 mm mesh width,
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“      For example 35.1840.03    

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width ASTM 200 = 75 µm

2_SiebeOrder number: 35.5800.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ASTM-E-1995 mesh
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard
sieve size
ASTM E-11-1995 mesh
Test sieve 
5 mm mesh width, 

200 mm dia., 
height 50 mm 
= standard size
For example 35.1800.03
Test sieve
5 mm mesh width, 
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 35.1810.03
Test sieve 
5 mm mesh width, 
8”dia., height 2”
Replace 5th position = ”0“ in the order no. by ”2“ For example 35.1820.03
Test sieve
5 mm mesh width,
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“      For example 35.1840.03    

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width ASTM 230 = 63 µm

2_SiebeOrder number: 35.6000.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ASTM-E-1995 mesh
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard
sieve size
ASTM E-11-1995 mesh
Test sieve 
5 mm mesh width, 

200 mm dia., 
height 50 mm 
= standard size
For example 35.1800.03
Test sieve
5 mm mesh width, 
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 35.1810.03
Test sieve 
5 mm mesh width, 
8”dia., height 2”
Replace 5th position = ”0“ in the order no. by ”2“ For example 35.1820.03
Test sieve
5 mm mesh width,
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“      For example 35.1840.03    

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width ASTM 270 = 53 µm

2_SiebeOrder number: 35.6200.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ASTM-E-1995 mesh
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard
sieve size
ASTM E-11-1995 mesh
Test sieve 
5 mm mesh width, 

200 mm dia., 
height 50 mm 
= standard size
For example 35.1800.03
Test sieve
5 mm mesh width, 
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 35.1810.03
Test sieve 
5 mm mesh width, 
8”dia., height 2”
Replace 5th position = ”0“ in the order no. by ”2“ For example 35.1820.03
Test sieve
5 mm mesh width,
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“      For example 35.1840.03    

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width ASTM 325 = 45 µm

2_SiebeOrder number: 35.6600.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ASTM-E-1995 mesh
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard
sieve size
ASTM E-11-1995 mesh
Test sieve 
5 mm mesh width, 

200 mm dia., 
height 50 mm 
= standard size
For example 35.1800.03
Test sieve
5 mm mesh width, 
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 35.1810.03
Test sieve 
5 mm mesh width, 
8”dia., height 2”
Replace 5th position = ”0“ in the order no. by ”2“ For example 35.1820.03
Test sieve
5 mm mesh width,
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“      For example 35.1840.03    

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width ASTM 400 = 38 µm

2_SiebeOrder number: 35.7000.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ASTM-E-1995 mesh
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard
sieve size
ASTM E-11-1995 mesh
Test sieve 
5 mm mesh width, 

200 mm dia., 
height 50 mm 
= standard size
For example 35.1800.03
Test sieve
5 mm mesh width, 
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 35.1810.03
Test sieve 
5 mm mesh width, 
8”dia., height 2”
Replace 5th position = ”0“ in the order no. by ”2“ For example 35.1820.03
Test sieve
5 mm mesh width,
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“      For example 35.1840.03    

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width ASTM 450 = 32 µm

2_SiebeOrder number: 35.7200.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ASTM-E-1995 mesh
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard
sieve size
ASTM E-11-1995 mesh
Test sieve 
5 mm mesh width, 

200 mm dia., 
height 50 mm 
= standard size
For example 35.1800.03
Test sieve
5 mm mesh width, 
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 35.1810.03
Test sieve 
5 mm mesh width, 
8”dia., height 2”
Replace 5th position = ”0“ in the order no. by ”2“ For example 35.1820.03
Test sieve
5 mm mesh width,
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“      For example 35.1840.03    

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width ASTM 500 = 25 µm

2_SiebeOrder number: 35.7600.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ASTM-E-1995 mesh
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard
sieve size
ASTM E-11-1995 mesh
Test sieve 
5 mm mesh width, 

200 mm dia., 
height 50 mm 
= standard size
For example 35.1800.03
Test sieve
5 mm mesh width, 
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 35.1810.03
Test sieve 
5 mm mesh width, 
8”dia., height 2”
Replace 5th position = ”0“ in the order no. by ”2“ For example 35.1820.03
Test sieve
5 mm mesh width,
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“      For example 35.1840.03    

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

Accessory description

Test sieve, mesh width ASTM 635 = 20 µm

2_SiebeOrder number: 35.7800.03

Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel

     This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.

If the test sieves are required in other diameters, please note the ordering examples:

Order example for test sieves according to ASTM-E-1995 mesh
Ordering example for test sieves in other diameters
200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
8“ dia., 2“ height, 
100 mm dia., 40 mm height

Deviation from standard
sieve size
ASTM E-11-1995 mesh
Test sieve 
5 mm mesh width, 

200 mm dia., 
height 50 mm 
= standard size
For example 35.1800.03
Test sieve
5 mm mesh width, 
200 mm dia., 
height 25 mm
Replace 5th position = “0” in the order no. by "1" For example 35.1810.03
Test sieve 
5 mm mesh width, 
8”dia., height 2”
Replace 5th position = ”0“ in the order no. by ”2“ For example 35.1820.03
Test sieve
5 mm mesh width,
100 mm dia., 
height 40 mm
Replace 5th position = ”0“ in the order no. by ”4“      For example 35.1840.03    

Test sieves and sieving accessories in other diameters and mesh widths on request.

Test sieves made of polyamide are available on request.

Test sieves and sieving accessories can not be exchanged or returned!

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

9e8e57c1e41Replacement seal rings

Accessory description

Replacement seal ring NBR

Order number: 31.0010.16

Replacement seal ring NBR for test sieves:

200 mm dia., 50 mm height

8" dia., 2" height

200 mm dia., 25 mm height

9e8e57c1e41Accessory description

Replacement seal ring NBR

Order number: 31.0520.16

Replacement seal ring NBR for test sieves:

100 mm dia.

9e8e57c1e41Sieve covers

Accessory description

Sieve cover made of stainless steel for test sieves 200 mm dia.

Order number: 31.1200.03

Sieve cover for a test sieve 200 mm dia. or to cover the whole sieve stack 200 mm dia.

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

9e8e57c1e41Accessory description

Sieve cover made of stainless steel for test sieves 8" dia.

Order number: 31.1220.03

Sieve cover for a test sieve 8" dia. or to cover the whole sieve stack 8" dia.

Element analysis

General specifications 

Material Stainless steel – 1.4435
ISO/EN/DIN code X2CrNiMo18-14-3
Chemical composition
Element Share %
Iron – Fe 60.4 – 64.9
Carbon – C 0.03
Silicon – Si 1
Manganese – Mn 2
Phosphorus – P 0.045
Sulphur – S 0.025
Chromium – Cr 17 – 18.5
Molybdenum – Mo 2.50 – 3.00
Nickel – Ni 12.50 – 15.00
Physical and mechanical properties
Density 7.95 g/cm³
Hardness approx. 120 HV10

9e8e57c1e41Accessory description

Sieve cover made of stainless steel for test sieves 100 mm dia.

Order number: 31.1240.03

Sieve cover for a test sieve 100 mm dia. or to cover the whole sieve stack 100 mm dia.

Element analysis

General specifications 

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

Accessories for grinding and homogenising small sample quantities

Accessory description

Clamping lid plexiglas for test sieves 100 mm dia. resp. grinding head
for conversion to Vibratory Micro MIll PULVERISETTE

plexiglas111Order number: 31.2010.00

     Clamping lid plexiglas for dry sieving with test sieves 100 mm dia. and grinding head for conversion of the ANALYSETTE 3 SPARTAN to the PULVERISETTE 0.

     The clamping lid made of plexiglas allows the operator to observe the sieving process and the ANALYSETTE 3 SPARTAN can be used with this clamping lid as Vibratory Micro Mill PULVERISETTE 0 for milling and homogenising of small quantities of samples (sample quantity: 0.1 - 10 ml, max. feed size: 5 mm, final fineness: 5 - 10 µm).