В наличии!
      Лаборатория
Предлагаем со склада в Алматы (ссылки):

 

 

Мощные аналитические грохоты: аксессуары Heavy Duty Analytical Sieve Shaker ANALYSETTE 18

A18-SievStack_de8deeAccessories for test sieves 400 mm dia.

Accessory description

Sieve pan made of stainless steel 400 mm dia. for dry sieving

Order number: 37.1000.01

For dry sieving with test sieves 400 mm diameter.

The sieve pan made of stainless steel completes the sieve stack.

Element analysis

General specifications 

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description

Interposed sieve pan made of stainless steel
400 mm dia. for dry sieving

Order number: 37.1100.01

For dry sieving with test sieves 400 mm diameter.

     If several sieving operations should be carried out simultaneously, an interposed sieve pan must be used as sieve pan between the sieves.

Element analysis

General specifications 

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

Umruestsatz_Nass_Siebung_A18Accessory description

Conversion kit for wet sieving

Order number: 18.3048.00

     Consisting of clamping lid with wide spreading spray diffuser, sieve pan with outlet made of stainless steel 400 mm dia. and PVC-hose.

A18-SievStack_de8deeAccessory description

Replacement seal ring NBR

Order number: 37.0010.16

Replacement seal ring NBR for test sieves 400 mm dia.

Accessories for automatic evaluation of sieve analysis

Accessory description

Software AUTOSIEVE for Windows

Order number: 03.2900.00

Software AUTOSIEVE for Windows

Multilingual AUTOSIEVE programme for automatic evaluation, simple monitoring and documentation of sieving results.

Supplied on a practical USB stick, very quickly installed.

     Simply connect a laboratory analysis balance and then weigh the sieves before and after sieving using differential weighing. AUTOSIEVE will do the rest.

     The software is suitable for Windows 7, XP and Vista, enables simple saving and retrieving of empty sieve weights, both of single sieves and complete sieve sets.

     Laboratory analysis balance, computer, colour ink jet printer and laser printer for the Heavy Duty Analytical Sieve Shaker ANALYSETTE 18 on request.

Laboratory analysis balance for the:

Vibratory Sieve Shaker ANALYSETTE 3 PRO

Vibratory Sieve Shaker ANALYSETTE 3 SPARTAN

VullkollanSieving aids

Accessory description

Vulkollan cube

Order number: 37.0200.16

1 vulkollan cube 

     For sieving of fine-grained materials or agglomerates, the use of these vulkollan cubes is recommended. 

Recommended quantity per sieve: minimum 10 cubes per sieve

Test sieves made of stainless steel, 400 mm diameter, 65 mm high
according to ISO 3310-1 with compliance certificate

A18-SievStack_de8deeAccessory description

Test sieve, mesh width 125 mm, ISO 3310-1

Order number: 34.0040.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel with compliance certificate.

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8dee

Accessory description

Test sieve, mesh width 100 mm, ISO 3310-1

Order number: 34.0050.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel with compliance certificate.

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description

Test sieve, mesh width 90 mm, ISO 3310-1

Order number: 34.0060.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel with compliance certificate.

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description

Test sieve, mesh width 63 mm, ISO 3310-1

Order number: 34.0000.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel with compliance certificate.

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description

Test sieve, mesh width 45 mm, ISO 3310-1

Order number: 34.0080.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel with compliance certificate.

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description

Test sieve, mesh width 31.5 mm, ISO 3310-1

Order number: 34.0100.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel with compliance certificate.

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description

Test sieve, mesh width 25 mm, ISO 3310-1
(correspond to ASTM 1" = 25 mm)

Order number: 34.0200.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate. 

     When ordering test sieves, please quote if the sieves should be delivered according to ISO 3310-01 or ASTM. 

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description

Test sieve, mesh width 22.4 mm, ISO 3310-1
(correspond to ASTM 7/8" = 22.4 mm)

Order number: 34.0300.02 

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate. 

     When ordering test sieves, please quote if the sieves should be delivered according to ISO 3310-01 or ASTM. 

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description

Test sieve, mesh width 20 mm, ISO 3310-1

Order number: 34.0400.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel with compliance certificate.

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description

Test sieve, mesh width 18 mm, ISO 3310-1
(correspond to ~ ASTM 3/4" = 19 mm)

Order number: 34.0600.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate. 

     When ordering test sieves, please quote if the sieves should be delivered according to ISO 3310-01 or ASTM. 

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description

Test sieve, mesh width 16 mm, ISO 3310-1 
(correspond to ~ ASTM 5/8" = 16 mm)

Order number: 34.0800.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate. 

     When ordering test sieves, please quote if the sieves should be delivered according to ISO 3310-01 or ASTM. 

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description

Test sieve, mesh width 14 mm, ISO 3310-1 
(correspond to ~ ASTM 0.53" = 13.2 mm)

Order number: 34.0900.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate. 

     When ordering test sieves, please quote if the sieves should be delivered according to ISO 3310-01 or ASTM. 

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description

Test sieve, mesh width 12.5 mm, ISO 3310-1 
(correspond to ~ ASTM 1/2" = 12.5 mm)

Order number: 34.1000.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate. 

     When ordering test sieves, please quote if the sieves should be delivered according to ISO 3310-01 or ASTM. 

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description

Test sieve, mesh width 11.2 mm, ISO 3310-1 
(correspond to ~ ASTM 7/16" = 11.2 mm)

Order number: 34.1100.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate. 

     When ordering test sieves, please quote if the sieves should be delivered according to ISO 3310-01 or ASTM. 

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description

Test sieve, mesh width 10 mm, ISO 3310-1 
(correspond to ~ ASTM 3/8" = 9.5 mm)

Order number: 34.1200.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate. 

     When ordering test sieves, please quote if the sieves should be delivered according to ISO 3310-01 or ASTM. 

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description

Test sieve, mesh width 9 mm, ISO 3310-1

Order number: 34.1300.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel with compliance certificate.

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description

Test sieve, mesh width 8 mm, ISO 3310-1 
(correspond to ~ ASTM 5/6" = 8 mm)

Order number: 34.1400.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate. 

     When ordering test sieves, please quote if the sieves should be delivered according to ISO 3310-01 or ASTM. 

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description

Test sieve, mesh width 7.1 mm, ISO 3310-1 
(correspond to ~ ASTM 0.265" = 6.7 mm)

Order number: 34.1500.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate. 

     When ordering test sieves, please quote if the sieves should be delivered according to ISO 3310-01 or ASTM. 

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description

Test sieve, mesh width 6.3 mm, ISO 3310-1 
(correspond to ~ ASTM 1/4" = 6.3 mm)

Order number: 34.1600.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate. 

     When ordering test sieves, please quote if the sieves should be delivered according to ISO 3310-01 or ASTM. 

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description

Test sieve, mesh width 5.6 mm, ISO 3310-1 
(correspond to ~ ASTM no. 31/2" = 5.6 mm)

Order number: 34.1700.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate. 

     When ordering test sieves, please quote if the sieves should be delivered according to ISO 3310-01 or ASTM. 

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description

Test sieve, mesh width 5 mm, ISO 3310-1 
(correspond to ~ ASTM no. 4 = 4.75 mm)

Order number: 34.1800.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate. 

     When ordering test sieves, please quote if the sieves should be delivered according to ISO 3310-01 or ASTM. 

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description

Test sieve, mesh width 4 mm, ISO 3310-1 
(correspond to ~ ASTM no. 5 = 4 mm)

Order number: 34.2000.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate. 

     When ordering test sieves, please quote if the sieves should be delivered according to ISO 3310-01 or ASTM. 

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description

Test sieve, mesh width 3.55 mm, ISO 3310-1 
(correspond to ASTM no. 6 = 3.35 mm)

Order number: 34.2100.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate. 

     When ordering test sieves, please quote if the sieves should be delivered according to ISO 3310-01 or ASTM. 

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description

Test sieve, mesh width 3.15 mm, ISO 3310-1

Order number: 34.2200.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel with compliance certificate.

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description

Test sieve, mesh width 2.8 mm, ISO 3310-1 
(correspond to ASTM no. 7 = 2.8 mm)

Order number: 34.2300.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate. 

     When ordering test sieves, please quote if the sieves should be delivered according to ISO 3310-01 or ASTM. 

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description

Test sieve, mesh width 2.5 mm, ISO 3310-1 
(correspond to ASTM no. 8 = 2.36 mm)

Order number: 34.2400.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate. 

     When ordering test sieves, please quote if the sieves should be delivered according to ISO 3310-01 or ASTM. 

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description

Test sieve, mesh width 2 mm, ISO 3310-1 
(correspond to ASTM no. 10 = 2 mm)

Order number: 34.2600.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate. 

     When ordering test sieves, please quote if the sieves should be delivered according to ISO 3310-01 or ASTM. 

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description

Test sieve, mesh width 1.8 mm, ISO 3310-1

Order number: 34.2700.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel with compliance certificate.

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description

Test sieve, mesh width 1.6 mm, ISO 3310-1 
(correspond to ASTM no. 12 = 1.7 mm)

Order number: 34.2800.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate. 

     When ordering test sieves, please quote if the sieves should be delivered according to ISO 3310-01 or ASTM. 

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description

Test sieve, mesh width 1.4 mm, ISO 3310-1 
(correspond to ASTM no. 14 = 1.4 mm)

Order number: 34.2900.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate. 

     When ordering test sieves, please quote if the sieves should be delivered according to ISO 3310-01 or ASTM. 

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description

Test sieve, mesh width 1.25 mm, ISO 3310-1 
(correspond to ASTM no. 16 = 1.18 mm)

Order number: 34.3000.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate. 

     When ordering test sieves, please quote if the sieves should be delivered according to ISO 3310-01 or ASTM. 

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description

Test sieve, mesh width 1.12 mm, ISO 3310-1

Order number: 34.3100.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel with compliance certificate.

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description

Test sieve, mesh width 1 mm, ISO 3310-1 
(correspond to ASTM no. 18 = 1 mm)

Order number: 34.3200.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate. 

     When ordering test sieves, please quote if the sieves should be delivered according to ISO 3310-01 or ASTM. 

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description 

Test sieve, mesh width 900 µm, ISO 3310-1

Order number: 34.3300.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel with compliance certificate.

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description

Test sieve, mesh width 800 

µm, ISO 3310-1 


(correspond to ASTM no. 20 = 0.85 mm)

Order number: 34.3400.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate. 

     When ordering test sieves, please quote if the sieves should be delivered according to ISO 3310-01 or ASTM. 

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description 

Test sieve, mesh width 750 µm, ISO 3310-1

Order number: 34.3450.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel with compliance certificate.

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description

Test sieve, mesh width 710 

µm, ISO 3310-1 


(correspond to ASTM no. 25 = 0.71 mm)

Order number: 34.3500.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.

     When ordering test sieves, please quote if the sieves should be delivered according to ISO 3310-01 or ASTM. 

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description

Test sieve, mesh width 630 µm, ISO 3310-1 
(correspond to ASTM no. 30 = 0.06 mm)

Order number: 34.3600.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.

     When ordering test sieves, please quote if the sieves should be delivered according to ISO 3310-01 or ASTM. 

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description 

Test sieve, mesh width 560 µm, ISO 3310-1

Order number: 34.3700.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel with compliance certificate.

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description

Test sieve, mesh width 500 µm, ISO 3310-1 
(correspond to ASTM no. 35 = 0.5 mm)

Order number: 34.3800.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.

     When ordering test sieves, please quote if the sieves should be delivered according to ISO 3310-01 or ASTM. 

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description 

Test sieve, mesh width 450 µm, ISO 3310-1

Order number: 34.3900.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel with compliance certificate.

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description

Test sieve, mesh width 400 µm, ISO 3310-1 
(correspond to ASTM no. 40 = 0.425 mm)

Order number: 34.4000.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.

     When ordering test sieves, please quote if the sieves should be delivered according to ISO 3310-01 or ASTM. 

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description

Test sieve, mesh width 355 µm, ISO 3310-1 
(correspond to ASTM no. 45 = 0.355 mm)

Order number: 34.4100.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.

     When ordering test sieves, please quote if the sieves should be delivered according to ISO 3310-01 or ASTM. 

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description

Test sieve, mesh width 315 µm, ISO 3310-1 
(correspond to ASTM no. 50 = 0.3 mm)

Order number: 34.4200.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.

     When ordering test sieves, please quote if the sieves should be delivered according to ISO 3310-01 or ASTM. 

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description 

Test sieve, mesh width 280 µm, ISO 3310-1

Order number: 34.4300.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel with compliance certificate.

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description

Test sieve, mesh width 250 µm, ISO 3310-1 
(correspond to ASTM no. 60 = 0.25 mm)

Order number: 34.4400.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.

     When ordering test sieves, please quote if the sieves should be delivered according to ISO 3310-01 or ASTM. 

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description 

Test sieve, mesh width 224 µm, ISO 3310-1

Order number: 34.4500.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel with compliance certificate.

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description

Test sieve, mesh width 200 µm, ISO 3310-1 
(correspond to ASTM no. 70 = 0.212 mm)

Order number: 34.4600.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.

     When ordering test sieves, please quote if the sieves should be delivered according to ISO 3310-01 or ASTM. 

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description

Test sieve, mesh width 180 µm, ISO 3310-1 
(correspond to ASTM no. 80 = 0.18 mm)

Order number: 34.4700.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.

     When ordering test sieves, please quote if the sieves should be delivered according to ISO 3310-01 or ASTM. 

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description

Test sieve, mesh width 160 µm, ISO 3310-1 
(correspond to ASTM no. 100 = 0.15 mm)

Order number: 34.4800.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.

     When ordering test sieves, please quote if the sieves should be delivered according to ISO 3310-01 or ASTM. 

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description 

Test sieve, mesh width 140 µm, ISO 3310-1

Order number: 34.4900.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel with compliance certificate.

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description

Test sieve, mesh width 125 µm, ISO 3310-1 
(correspond to ASTM no. 120 = 0.125 mm)

Order number: 34.5000.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.

     When ordering test sieves, please quote if the sieves should be delivered according to ISO 3310-01 or ASTM. 

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description 

Test sieve, mesh width 112 µm, ISO 3310-1

Order number: 34.5100.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel with compliance certificate.

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description

Test sieve, mesh width 100 µm, ISO 3310-1 
(correspond to ASTM no. 140 = 0.106 mm)

Order number: 34.5200.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.

     When ordering test sieves, please quote if the sieves should be delivered according to ISO 3310-01 or ASTM. 

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description

Test sieve, mesh width 90 µm, ISO 3310-1 
(correspond to ASTM no. 170 = 0.09 mm)

Order number: 34.5400.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.

     When ordering test sieves, please quote if the sieves should be delivered according to ISO 3310-01 or ASTM. 

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description 

Test sieve, mesh width 80 µm, ISO 3310-1

Order number: 34.5600.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel with compliance certificate.

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description

Test sieve, mesh width 71 µm, ISO 3310-1 
(correspond to ASTM no. 200 = 0.075 mm)

Order number: 34.5800.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.

     When ordering test sieves, please quote if the sieves should be delivered according to ISO 3310-01 or ASTM. 

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB

A18-SievStack_de8deeAccessory description

Test sieve, mesh width 63 µm, ISO 3310-1 
(correspond to ASTM no. 230 = 0.063 mm)

Order number: 34.6000.02

     Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.

     When ordering test sieves, please quote if the sieves should be delivered according to ISO 3310-01 or ASTM. 

     Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
     Test sieves and sieving accessories are not subject to exchange!

Element analysis

General specifications

Material Stainless steel – 1.4404/ 316L
ISO/EN/DIN code X2CrNiMo17-12-2 / SEW 410
Chemical composition
Element Share %
Iron – Fe 68.4 - 62.9
Carbon – C 0.03
Silicon – Si 1.0
Manganese – Mn 2.0
Phosphorus – P 0.045
Sulphur – S 0.015
Chromium – Cr 16.5 - 18.5
Nickel – Ni 10.0 - 13.0
Molybdenum – Mo 2.0 - 2.5
Physical and mechanical properties
Density 8.0 g/cm³
Hardness 215 HB