В наличии!
      Лаборатория
Предлагаем со склада в Алматы (ссылки):

 

 

Ионселективные электроды - модели

DX219-F Fluoride half-cell

ISE_trio_s_jpgISE DX series

     An electrode for determining fluoride concentration in samples such as drinking water, milk, plants and toothpaste

 

 

 


Технические характеристики - DX219-F Fluoride half-cell

Материал корпуса Non-breakable POM
Температурный диапазон, °C 0 ... 80
Диапазон измерения 1.0 ... 1.0E-06 mol/L
Оптимальный рН-диапазон 4 ... 10
Номер заказа 51340500

Особенности и преимущества

The robust solid state membrane and plastic shaft make the fluoride electrode ideal for both field and laboratory applications.

  • Solid state membrane
  • Rugged plastic shaft

perfectION™ comb Ag/S2 Combination Electrode

22041     ISE measurement has never been so simple! The new Click & Clear™ junction of the combined ion-selective electrodes combines three advantages in one tool: The electrolyte solution can flow easily through the junction by pressing the electrode head downwards. This ensures that the junction is optimally cleaned between the measurements and the electrolyte can be simply emptied and refilled if necessary. Click & Clear™is a sleeve junction that enables optimum contact between the electrolyte and measurement solution, even in difficult samples.

 


Технические характеристики - perfectION™ comb Ag/S2 Combination Electrode

Диапазон измерения 10-7 … 1 mol/L
Ag+: 0.01 … 108000 mg/L
S2-: 0.003 … 32000 mg/L
Материал корпуса Epoxy
Температурный диапазон, °C 0 ... 80
Кабели и коннекторы 1.2 m cable; BNC
Тип стекла мембраны Solid state
Оптимальный рН-диапазон 2 … 12
Электролит электрода сравнения Ion Electrolyte B
Номер заказа 51344700

Особенности и преимущества

     All combined ion-selective electrodes consist of a measuring electrode complete with an integrated reference. There is therefore no need for an additional reference electrode. 

  • Sensor with attached cable and BNC connector 
  • Reference electrolyte (60 mL) 
  • Operating instructions 

     To ensure an unproblematic start to your ISE measurement, the required calibration standards and ISA solutions (Ionic Strength Adjuster) can be ordered at the same time.

Order information:

ISA-solution     Ag+: 51344760
S2-: see manual
Calibration standard 1000mg/L Ag+: 51344770
S2-: 51344781
Reference electrolyte Ion Electrolyte B
51344751

perfectION™ comb Ag/S2 Lemo Combination Electrode

22041     ISE measurement has never been so simple! The new Click & Clear™ junction of the combined ion-selective electrodes combines three advantages in one tool: The electrolyte solution can flow easily through the junction by pressing the electrode head downwards. This ensures that the junction is optimally cleaned between the measurements and the electrolyte can be simply emptied and refilled if necessary. Click & Clear™is a sleeve junction that enables optimum contact between the electrolyte and measurement solution, even in difficult samples.

 


Технические характеристики - perfectION™ comb Ag/S2 Lemo Combination Electrode

Диапазон измерения 10-7 ? 1 mol/LAg+: 0.01 ? 108000 mg/LS2-: 0.003 ? 32000 mg/L
Материал корпуса Epoxy
Температурный диапазон, °C 0 ... 80
Кабели и коннекторы 1.2 m cable; Lemo
Тип стекла мембраны Solid state
Оптимальный рН-диапазон 2 ? 12
Электролит электрода сравнения Ion Electrolyte B
Номер заказа 51344800

Особенности и преимущества

     All combined ion-selective electrodes consist of a measuring electrode complete with an integrated reference. There is therefore no need for an additional reference electrode. 

  • Sensor with attached cable and LEMO connector 
  • Reference electrolyte (60 mL) 
  • Operating instructions 

     To ensure an unproblematic start to your ISE measurement, the required calibration standards and ISA solutions (Ionic Strength Adjuster) can be ordered at the same time.

Order information:

ISA-solution     Ag+: 51344760 
S2-: see manual 
Calibration standard 1000mg/L Ag+: 51344770 
S2-: 51344781 
Reference electrolyte Ion Electrolyte B 
51344751 

perfectION™ comb Ca Combination Electrode

11616     ISE measurement has never been so simple! The new Click & Clear™ junction of the combined ion-selective electrodes combines three advantages in one tool: The electrolyte solution can flow easily through the junction by pressing the electrode head downwards. This ensures that the junction is optimally cleaned between the measurements and the electrolyte can be simply emptied and refilled if necessary. Click & Clear™is a sleeve junction that enables optimum contact between the electrolyte and measurement solution, even in difficult samples.

 


Технические характеристики - perfectION™ comb Ca Combination Electrode

Диапазон измерения 5 * 10-7 … 1 mol/L 
0.02 … 40100 mg/L
Материал корпуса Epoxy
Температурный диапазон, °C 0 ... 40
Кабели и коннекторы 1.2 m cable; BNC
Тип стекла мембраны Polymer
Оптимальный рН-диапазон 2.5 … 11
Электролит электрода сравнения Ion Electrolyte A
Номер заказа 51344703

Особенности и преимущества

     All combined ion-selective electrodes consist of a measuring electrode complete with an integrated reference. There is therefore no need for an additional reference electrode. In electrodes with a polymer membrane, the membrane module can also be replaced. One replacement module is supplied with every new electrode; all at no extra cost! 

  • Sensor with attached cable and BNC connector 
  • Reference electrolyte (60 mL) 
  • Operating instructions 
  • 1 replacement module 

     To ensure an unproblematic start to your ISE measurement, the required calibration standards and ISA solutions (Ionic Strength Adjuster) can be ordered at the same time.

Order information:

ISA-solution     51344761
Calibration standard 1000mg/L 51344771
Reference electrolyte Ion Electrolyte A 
51344750 
Membrane module 51344850

perfectION™ comb Ca Lemo Combination Electrode

11616     ISE measurement has never been so simple! The new Click & Clear™ junction of the combined ion-selective electrodes combines three advantages in one tool: The electrolyte solution can flow easily through the junction by pressing the electrode head downwards. This ensures that the junction is optimally cleaned between the measurements and the electrolyte can be simply emptied and refilled if necessary. Click & Clear™is a sleeve junction that enables optimum contact between the electrolyte and measurement solution, even in difficult samples.

 


Технические характеристики - perfectION™ comb Ca Lemo Combination Electrode

Диапазон измерения 5 * 10-7 … 1 mol/L 
0.02 … 40100 mg/L
Материал корпуса Epoxy
Температурный диапазон, °C 0 ... 40
Кабели и коннекторы 1.2 m cable; Lemo
Тип стекла мембраны Polymer
Оптимальный рН-диапазон 2.5 …11
Электролит электрода сравнения Ion Electrolyte A
Номер заказа 51344803

Особенности и преимущества

     All combined ion-selective electrodes consist of a measuring electrode complete with an integrated reference. There is therefore no need for an additional reference electrode. In electrodes with a polymer membrane, the membrane module can also be replaced. One replacement module is supplied with every new electrode; all at no extra cost! 

  • Sensor with attached cable and LEMO connector 
  • Reference electrolyte (60 mL) 
  • Operating instructions 
  • 1 replacement module 

     To ensure an unproblematic start to your ISE measurement, the required calibration standards and ISA solutions (Ionic Strength Adjuster) can be ordered at the same time.

Order information:

ISA-solution     51344761
Calibration standard 1000mg/L 51344771
Reference electrolyte Ion Electrolyte A 
51344750 
Membrane module 51344850

perfectION™ comb Cl Combination Electrode

82229     ISE measurement has never been so simple! The new Click & Clear™ junction of the combined ion-selective electrodes combines three advantages in one tool: The electrolyte solution can flow easily through the junction by pressing the electrode head downwards. This ensures that the junction is optimally cleaned between the measurements and the electrolyte can be simply emptied and refilled if necessary. Click & Clear™is a sleeve junction that enables optimum contact between the electrolyte and measurement solution, even in difficult samples.

 


Технические характеристики - perfectION™ comb Cl Combination Electrode

Диапазон измерения 5 * 10-5 … 1 mol/L
1.8 … 35500 mg/L
Материал корпуса Epoxy
Температурный диапазон, °C 0 ... 80
Кабели и коннекторы 1.2 m cable; BNC
Тип стекла мембраны Solid state
Оптимальный рН-диапазон 2 … 12
Электролит электрода сравнения Ion Electrolyte B
Номер заказа 51344706

Особенности и преимущества

     All combined ion-selective electrodes consist of a measuring electrode complete with an integrated reference. There is therefore no need for an additional reference electrode. 

  • Sensor with attached cable and BNC connector 
  • Reference electrolyte (60 mL) 
  • Operating instructions 

     To ensure an unproblematic start to your ISE measurement, the required calibration standards and ISA solutions (Ionic Strength Adjuster) can be ordered at the same time.

Order information:

ISA-solution     51344760
Calibration standard 1000mg/L 51344772
Reference electrolyte Ion Electrolyte B 
51344751

perfectION™ comb Cl Lemo Combination Electrode

82229     ISE measurement has never been so simple! The new Click & Clear™ junction of the combined ion-selective electrodes combines three advantages in one tool: The electrolyte solution can flow easily through the junction by pressing the electrode head downwards. This ensures that the junction is optimally cleaned between the measurements and the electrolyte can be simply emptied and refilled if necessary. Click & Clear™is a sleeve junction that enables optimum contact between the electrolyte and measurement solution, even in difficult samples.

 


Технические характеристики - perfectION™ comb Cl Lemo Combination Electrode

Диапазон измерения 5 * 10-5 … 1 mol/L
1.8 … 35500 mg/L
Материал корпуса Epoxy
Температурный диапазон, °C 0 ... 80
Кабели и коннекторы 1.2 m cabel; Lemo
Тип стекла мембраны Solid state
Оптимальный рН-диапазон 2 … 12
Электролит электрода сравнения Ion Electrolyte B
Номер заказа 51344806

Особенности и преимущества

     All combined ion-selective electrodes consist of a measuring electrode complete with an integrated reference. There is therefore no need for an additional reference electrode. 

  • Sensor with attached cable and LEMO connector 
  • Reference electrolyte (60 mL) 
  • Operating instructions 

     To ensure an unproblematic start to your ISE measurement, the required calibration standards and ISA solutions (Ionic Strength Adjuster) can be ordered at the same time. 

Order information:

ISA-solution     51344760
Calibration standard 1000mg/L 51344772
Reference electrolyte Ion Electrolyte B 
51344751

perfectION™ comb CN Combination Electrode

30441     ISE measurement has never been so simple! The new Click & Clear™ junction of the combined ion-selective electrodes combines three advantages in one tool: The electrolyte solution can flow easily through the junction by pressing the electrode head downwards. This ensures that the junction is optimally cleaned between the measurements and the electrolyte can be simply emptied and refilled if necessary. Click & Clear™is a sleeve junction that enables optimum contact between the electrolyte and measurement solution, even in difficult samples.

 


Технические характеристики - perfectION™ comb CN Combination Electrode

Диапазон измерения 8 * 10-6 … 10-2 mol/L
0.2 … 260 mg/L
Материал корпуса Epoxy
Температурный диапазон, °C 0 ... 80
Кабели и коннекторы 1.2 m cable; BNC
Тип стекла мембраны Solid state
Оптимальный рН-диапазон 10 … 14
Электролит электрода сравнения Ion Electrolyte B
Номер заказа 51344709

Особенности и преимущества

     All combined ion-selective electrodes consist of a measuring electrode complete with an integrated reference. There is therefore no need for an additional reference electrode. 

  • Sensor with attached cable and BNC connector 
  • Reference electrolyte (60 mL) 
  • Operating instructions 

     To ensure an unproblematic start to your ISE measurement, the required calibration standards and ISA solutions (Ionic Strength Adjuster) can be ordered at the same time.

Order information:

ISA-solution     10 mol/L NaOH
Calibration standard 1000mg/L 51344773
Reference electrolyte Ion Electrolyte B 
51344751

perfectION™ comb CN Lemo Combination Electrode

30441     ISE measurement has never been so simple! The new Click & Clear™ junction of the combined ion-selective electrodes combines three advantages in one tool: The electrolyte solution can flow easily through the junction by pressing the electrode head downwards. This ensures that the junction is optimally cleaned between the measurements and the electrolyte can be simply emptied and refilled if necessary. Click & Clear™is a sleeve junction that enables optimum contact between the electrolyte and measurement solution, even in difficult samples.

 


Технические характеристики - perfectION™ comb CN Lemo Combination Electrode

Диапазон измерения 8 * 10-6 … 10-2 mol/L
0.2 … 260 mg/L
Материал корпуса Epoxy
Температурный диапазон, °C 0 ... 80
Кабели и коннекторы 1.2 m cable; Lemo
Тип стекла мембраны Solid state
Оптимальный рН-диапазон 10 … 14
Электролит электрода сравнения Ion Electrolyte B
Номер заказа 51344809

Особенности и преимущества

     All combined ion-selective electrodes consist of a measuring electrode complete with an integrated reference. There is therefore no need for an additional reference electrode. 

  • Sensor with attached cable and LEMO connector 
  • Reference electrolyte (60 mL) 
  • Operating instructions 

     To ensure an unproblematic start to your ISE measurement, the required calibration standards and ISA solutions (Ionic Strength Adjuster) can be ordered at the same time.

Order information:

ISA-solution     10 mol/L NaOH
Calibration standard 1000mg/L 51344773
Reference electrolyte Ion Electrolyte B 
51344751

perfectION™ comb Cu Combination Electrode

43026     ISE measurement has never been so simple! The new Click & Clear™ junction of the combined ion-selective electrodes combines three advantages in one tool: The electrolyte solution can flow easily through the junction by pressing the electrode head downwards. This ensures that the junction is optimally cleaned between the measurements and the electrolyte can be simply emptied and refilled if necessary. Click & Clear™is a sleeve junction that enables optimum contact between the electrolyte and measurement solution, even in difficult samples.

 


Технические характеристики - perfectION™ comb Cu Combination Electrode

Диапазон измерения 10-8 … 0.1 mol/L
6.4 * 10-4 … 6354 mg/L
Материал корпуса Epoxy
Температурный диапазон, °C 0 ... 80
Кабели и коннекторы 1.2 m cable; BNC
Тип стекла мембраны Solid state
Оптимальный рН-диапазон 2 … 12
Электролит электрода сравнения Ion Electrolyte D
Номер заказа 51344712

Особенности и преимущества

    All combined ion-selective electrodes consist of a measuring electrode complete with an integrated reference. There is therefore no need for an additional reference electrode. 

  • Sensor with attached cable and BNC connector 
  • Reference electrolyte (60 mL) 
  • Operating instructions 

    To ensure an unproblematic start to your ISE measurement, the required calibration standards and ISA solutions (Ionic Strength Adjuster) can be ordered at the same time.

Order information:

ISA-solution     51344760
Calibration standard 1000mg/L 51344774
Reference electrolyte Ion Electrolyte D 
51344753

perfectION™ comb Cu Lemo Combination Electrode

43026     ISE measurement has never been so simple! The new Click & Clear™ junction of the combined ion-selective electrodes combines three advantages in one tool: The electrolyte solution can flow easily through the junction by pressing the electrode head downwards. This ensures that the junction is optimally cleaned between the measurements and the electrolyte can be simply emptied and refilled if necessary. Click & Clear™is a sleeve junction that enables optimum contact between the electrolyte and measurement solution, even in difficult samples.

 


Технические характеристики - perfectION™ comb Cu Lemo Combination Electrode

Диапазон измерения 10-8 … 0.1 mol/L
6.4 * 10-4 … 6354 mg/L
Материал корпуса Epoxy
Температурный диапазон, °C 0 ... 80
Кабели и коннекторы 1.2 m cable; Lemo
Тип стекла мембраны Solid state
Оптимальный рН-диапазон 2 … 12
Электролит электрода сравнения Ion Electrolyte D
Номер заказа 51344812

Особенности и преимущества

     All combined ion-selective electrodes consist of a measuring electrode complete with an integrated reference. There is therefore no need for an additional reference electrode. 

  • Sensor with attached cable and LEMO connector 
  • Reference electrolyte (60 mL) 
  • Operating instructions 

     To ensure an unproblematic start to your ISE measurement, the required calibration standards and ISA solutions (Ionic Strength Adjuster) can be ordered at the same time.

Order information:

ISA-solution     51344760
Calibration standard 1000mg/L 51344774
Reference electrolyte Ion Electrolyte D 
51344753

perfectION™ comb F Combination Electrode

42214     ISE measurement has never been so simple! The new Click & Clear™ junction of the combined ion-selective electrodes combines three advantages in one tool: The electrolyte solution can flow easily through the junction by pressing the electrode head downwards. This ensures that the junction is optimally cleaned between the measurements and the electrolyte can be simply emptied and refilled if necessary. Click & Clear™is a sleeve junction that enables optimum contact between the electrolyte and measurement solution, even in difficult samples.

 


Технические характеристики - perfectION™ comb F Combination Electrode

Диапазон измерения 10-6 mol/L saturated
0.02 mg/L saturated
Материал корпуса Epoxy
Температурный диапазон, °C 0 ... 80
Кабели и коннекторы 1.2 m cable; BNC
Тип стекла мембраны Solid state
Оптимальный рН-диапазон 4.5 … 5.5
Электролит электрода сравнения Ion Electrolyte A
Номер заказа 51344715

Особенности и преимущества

     All combined ion-selective electrodes consist of a measuring electrode complete with an integrated reference. There is therefore no need for an additional reference electrode. 

  • Sensor with attached cable and BNC connector 
  • Reference electrolyte (60 mL) 
  • Operating instructions 


     To ensure an unproblematic start to your ISE measurement, the required calibration standards and ISA solutions (Ionic Strength Adjuster) can be ordered at the same time.

Order information:

ISA-solution     51344765
Calibration standard 1000mg/L 51344775
Reference electrolyte Ion Electrolyte A 
51344750

perfectION™ comb F Lemo Combination Electrode

42214     ISE measurement has never been so simple! The new Click & Clear™ junction of the combined ion-selective electrodes combines three advantages in one tool: The electrolyte solution can flow easily through the junction by pressing the electrode head downwards. This ensures that the junction is optimally cleaned between the measurements and the electrolyte can be simply emptied and refilled if necessary. Click & Clear™is a sleeve junction that enables optimum contact between the electrolyte and measurement solution, even in difficult samples.

 


Технические характеристики - perfectION™ comb F Lemo Combination Electrode

Диапазон измерения 10-6 mol/L saturated 
0.02 mg/L saturated
Материал корпуса Epoxy
Температурный диапазон, °C 0 ... 80
Кабели и коннекторы 1.2 m cable; Lemo
Тип стекла мембраны Solid state
Оптимальный рН-диапазон 4.5 … 5.5
Электролит электрода сравнения Ion Electrolyte A
Номер заказа 51344815

Особенности и преимущества

     All combined ion-selective electrodes consist of a measuring electrode complete with an integrated reference. There is therefore no need for an additional reference electrode.

  • Sensor with attached cable and LEMO connector 
  • Reference electrolyte (60 mL) 
  • Operating instructions 

     To ensure an unproblematic start to your ISE measurement, the required calibration standards and ISA solutions (Ionic Strength Adjuster) can be ordered at the same time.

Order information:

ISA-solution     51344765
Calibration standard 1000mg/L 51344775
Reference electrolyte Ion Electrolyte A 
51344750

perfectION™ comb I Combination Electrode

14820     ISE measurement has never been so simple! The new Click & Clear™ junction of the combined ion-selective electrodes combines three advantages in one tool: The electrolyte solution can flow easily through the junction by pressing the electrode head downwards. This ensures that the junction is optimally cleaned between the measurements and the electrolyte can be simply emptied and refilled if necessary. Click & Clear™is a sleeve junction that enables optimum contact between the electrolyte and measurement solution, even in difficult samples.

 


Технические характеристики - perfectION™ comb I Combination Electrode

Диапазон измерения 5 * 10-8 … 1 mol/L
0.005 … 127000 mg/L
Материал корпуса Epoxy
Температурный диапазон, °C 0 ... 80
Кабели и коннекторы 1.2 m cable; BNC
Тип стекла мембраны Solid state
Оптимальный рН-диапазон 0 … 12
Электролит электрода сравнения Ion Electrolyte D
Номер заказа 51344718

Особенности и преимущества

     All combined ion-selective electrodes consist of a measuring electrode complete with an integrated reference. There is therefore no need for an additional reference electrode. 

  • Sensor with attached cable and BNC connector 
  • Reference electrolyte (60 mL) 
  • Operating instructions 

     To ensure an unproblematic start to your ISE measurement, the required calibration standards and ISA solutions (Ionic Strength Adjuster) can be ordered at the same time.

Order information:

ISA-solution     51344760
Calibration standard 1000mg/L 51344776
Reference electrolyte Ion Electrolyte D 
51344753

perfectION™ comb I Lemo Combination Electrode

14820     ISE measurement has never been so simple! The new Click & Clear™ junction of the combined ion-selective electrodes combines three advantages in one tool: The electrolyte solution can flow easily through the junction by pressing the electrode head downwards. This ensures that the junction is optimally cleaned between the measurements and the electrolyte can be simply emptied and refilled if necessary. Click & Clear™is a sleeve junction that enables optimum contact between the electrolyte and measurement solution, even in difficult samples.

 


Технические характеристики - perfectION™ comb I Lemo Combination Electrode

Диапазон измерения 5 * 10-8 … 1 mol/L
0.005 … 127000 mg/L
Материал корпуса Epoxy
Температурный диапазон, °C 0 ... 80
Кабели и коннекторы 1.2 m cable; Lemo
Тип стекла мембраны Solid state
Оптимальный рН-диапазон 0 … 12
Электролит электрода сравнения Ion Electrolyte D
Номер заказа 51344818

Особенности и преимущества

     All combined ion-selective electrodes consist of a measuring electrode complete with an integrated reference. There is therefore no need for an additional reference electrode. 

  • Sensor with attached cable and LEMO connector 
  • Reference electrolyte (60 mL) 
  • Operating instructions 

     To ensure an unproblematic start to your ISE measurement, the required calibration standards and ISA solutions (Ionic Strength Adjuster) can be ordered at the same time.

Order information:

ISA-solution     51344760
Calibration standard 1000mg/L 51344776
Reference electrolyte Ion Electrolyte D 
51344753

perfectION™ comb K Combination Electrode

98820     ISE measurement has never been so simple! The new Click & Clear™ junction of the combined ion-selective electrodes combines three advantages in one tool: The electrolyte solution can flow easily through the junction by pressing the electrode head downwards. This ensures that the junction is optimally cleaned between the measurements and the electrolyte can be simply emptied and refilled if necessary. Click & Clear™is a sleeve junction that enables optimum contact between the electrolyte and measurement solution, even in difficult samples.

 


Технические характеристики - perfectION™ comb K Combination Electrode

Диапазон измерения 10-6 … 1 mol/L 
0.04 … 39000 mg/L
Материал корпуса Epoxy
Температурный диапазон, °C 0 ... 40
Кабели и коннекторы 1.2 m cable; BNC
Тип стекла мембраны Polymer
Оптимальный рН-диапазон 2.5 … 11
Электролит электрода сравнения Ion Electrolyte E
Номер заказа 51344721

Особенности и преимущества

     All combined ion-selective electrodes consist of a measuring electrode complete with an integrated reference. There is therefore no need for an additional reference electrode. In electrodes with a polymer membrane, the membrane module can also be replaced. One replacement module is supplied with every new electrode; all at no extra cost! 

  • Sensor with attached cable and BNC connector 
  • Reference electrolyte (60 mL) 
  • Operating instructions 
  • 1 replacement module 

     To ensure an unproblematic start to your ISE measurement, the required calibration standards and ISA solutions (Ionic Strength Adjuster) can be ordered at the same time.

Order information:

ISA-solution     51344762
Calibration standard 1000mg/L 51344777
Reference electrolyte Ion Electrolyte E 
51344754 
Membrane module 51344851

perfectION™ comb K Lemo Combination Electrode

98820     ISE measurement has never been so simple! The new Click & Clear™ junction of the combined ion-selective electrodes combines three advantages in one tool: The electrolyte solution can flow easily through the junction by pressing the electrode head downwards. This ensures that the junction is optimally cleaned between the measurements and the electrolyte can be simply emptied and refilled if necessary. Click & Clear™is a sleeve junction that enables optimum contact between the electrolyte and measurement solution, even in difficult samples.

 


Технические характеристики - perfectION™ comb K Lemo Combination Electrode

Диапазон измерения 10-6 … 1 mol/L 
0.04 … 39000 mg/L
Материал корпуса Epoxy
Температурный диапазон, °C 0 ... 40
Кабели и коннекторы 1.2 m cable; Lemo
Тип стекла мембраны Polymer
Оптимальный рН-диапазон 2.5 … 11
Электролит электрода сравнения Ion Electrolyte E
Номер заказа 51344821

Особенности и преимущества

     All combined ion-selective electrodes consist of a measuring electrode complete with an integrated reference. There is therefore no need for an additional reference electrode. In electrodes with a polymer membrane, the membrane module can also be replaced. One replacement module is supplied with every new electrode; all at no extra cost! 

  • Sensor with attached cable and LEMO connector 
  • Reference electrolyte (60 mL) 
  • Operating instructions 
  • 1 replacement module 

     To ensure an unproblematic start to your ISE measurement, the required calibration standards and ISA solutions (Ionic Strength Adjuster) can be ordered at the same time.

Order information:

ISA-solution     51344762
Calibration standard 1000mg/L 51344777
Reference electrolyte Ion Electrolyte E 
51344754 
Membrane module 51344851

perfectION™ comb Na Combination Electrode

42413     An electrode for determining the sodium concentration of samples such as food, biological fluids and cooling water. The sodium electrode has a similar construction to a normal pH electrode but uses membrane glass with a higher selectivity for sodium.

 

 

 


Технические характеристики - perfectION™ comb Na Combination Electrode

Диапазон измерения 10-7 … 1 mol/L
0.002 … 23000 mg/L
Материал корпуса Glass
Температурный диапазон, °C 0 ... 80
Кабели и коннекторы S7
Тип стекла мембраны Na+-Glass
Оптимальный рН-диапазон 8 … 11
Электролит электрода сравнения 3 mol/L KCl
Номер заказа 51344724

Особенности и преимущества

     All combined ion-selective electrodes consist of a measuring electrode complete with an integrated reference. There is therefore no need for an additional reference electrode. 

  • Sensor with S7 head 
  • Reference electrolyte (25 mL) 
  • Operating instructions 

     To ensure an unproblematic start to your ISE measurement, the required calibration standards and ISA solutions (Ionic Strength Adjuster) can be ordered at the same time.

Order information:

ISA-solution     NH4Cl / NH4OH
Calibration standard 1000mg/L 51344778
Reference electrolyte 3 mol/L KCl 
51340049

perfectION™ comb NO3 Combination Electrode

85707     ISE measurement has never been so simple! The new Click & Clear™ junction of the combined ion-selective electrodes combines three advantages in one tool: The electrolyte solution can flow easily through the junction by pressing the electrode head downwards. This ensures that the junction is optimally cleaned between the measurements and the electrolyte can be simply emptied and refilled if necessary. Click & Clear™is a sleeve junction that enables optimum contact between the electrolyte and measurement solution, even in difficult samples.

 


Технические характеристики - perfectION™ comb NO3 Combination Electrode

Диапазон измерения 7 * 10-6 … 1 mol/L NO3-
0.1 … 14000 mg/L NO3- as N
Материал корпуса Epoxy
Температурный диапазон, °C 0 ... 40
Кабели и коннекторы 1.2 m cable; BNC
Тип стекла мембраны Polymer
Оптимальный рН-диапазон 2.5 … 11
Электролит электрода сравнения Ion Electrolyte F
Номер заказа 51344727

Особенности и преимущества

     All combined ion-selective electrodes consist of a measuring electrode complete with an integrated reference. There is therefore no need for an additional reference electrode. In electrodes with a polymer membrane, the membrane module can also be replaced. One replacement module is supplied with every new electrode; all at no extra cost! 

  • Sensor with attached cable and BNC connector 
  • Reference electrolyte (60 mL) 
  • Operating instructions 
  • 1 replacement module 

     To ensure an unproblematic start to your ISE measurement, the required calibration standards and ISA solutions (Ionic Strength Adjuster) can be ordered at the same time.

Order information:

ISA-solution     51344763
Calibration standard 1000mg/L 51344779
Reference electrolyte Ion Electrolyte F 
51344755 
Membrane module 51344852

perfectION™ comb NO3 Lemo Combination Electrode

85707     ISE measurement has never been so simple! The new Click & Clear™ junction of the combined ion-selective electrodes combines three advantages in one tool: The electrolyte solution can flow easily through the junction by pressing the electrode head downwards. This ensures that the junction is optimally cleaned between the measurements and the electrolyte can be simply emptied and refilled if necessary. Click & Clear™is a sleeve junction that enables optimum contact between the electrolyte and measurement solution, even in difficult samples.

 


Технические характеристики - perfectION™ comb NO3 Lemo Combination Electrode

Диапазон измерения 7 * 10-6 … 1 mol/L NO3-
0.1 … 14000 mg/L NO3- as N
Материал корпуса Epoxy
Температурный диапазон, °C 0 ... 40
Кабели и коннекторы 1.2 m cable; Lemo
Тип стекла мембраны Polymer
Оптимальный рН-диапазон 2.5 … 11
Электролит электрода сравнения Ion Electrolyte F
Номер заказа 51344827

Особенности и преимущества

     All combined ion-selective electrodes consist of a measuring electrode complete with an integrated reference. There is therefore no need for an additional reference electrode. In electrodes with a polymer membrane, the membrane module can also be replaced. One replacement module is supplied with every new electrode; all at no extra cost! 

  • Sensor with attached cable and LEMO connector 
  • Reference electrolyte (60 mL) 
  • Operating instructions 
  • 1 replacement module 

     To ensure an unproblematic start to your ISE measurement, the required calibration standards and ISA solutions (Ionic Strength Adjuster) can be ordered at the same time.

Order information:

ISA-solution     51344763
Calibration standard 1000mg/L 51344779
Reference electrolyte Ion Electrolyte F 
51344755 
Membrane module 51344852

perfectION™ comb Pb Combination Electrode

2718     ISE measurement has never been so simple! The new Click & Clear™ junction of the combined ion-selective electrodes combines three advantages in one tool: The electrolyte solution can flow easily through the junction by pressing the electrode head downwards. This ensures that the junction is optimally cleaned between the measurements and the electrolyte can be simply emptied and refilled if necessary. Click & Clear™is a sleeve junction that enables optimum contact between the electrolyte and measurement solution, even in difficult samples.

 


Технические характеристики - perfectION™ comb Pb Combination Electrode

Диапазон измерения 10-6 … 0,1 mol/L
0.2 … 20700 mg/L
Материал корпуса Epoxy
Температурный диапазон, °C 0 ... 80
Кабели и коннекторы 1.2 m cable; BNC
Тип стекла мембраны Solid state
Оптимальный рН-диапазон 4 … 7
Электролит электрода сравнения Ion Electrolyte B
Номер заказа 51344730

Особенности и преимущества

     All combined ion-selective electrodes consist of a measuring electrode complete with an integrated reference. There is therefore no need for an additional reference electrode. 

  • Sensor with attached cable and BNC connector 
  • Reference electrolyte (60 mL) 
  • Operating instructions 

     To ensure an unproblematic start to your ISE measurement, the required calibration standards and ISA solutions (Ionic Strength Adjuster) can be ordered at the same time.

Order information:

ISA-solution     5 mol/L NaClO4
Calibration standard 1000mg/L 51344780
Reference electrolyte Ion Electrolyte B 
51344751

perfectION™ comb Pb Lemo Combination Electrode

2718     ISE measurement has never been so simple! The new Click & Clear™ junction of the combined ion-selective electrodes combines three advantages in one tool: The electrolyte solution can flow easily through the junction by pressing the electrode head downwards. This ensures that the junction is optimally cleaned between the measurements and the electrolyte can be simply emptied and refilled if necessary. Click & Clear™is a sleeve junction that enables optimum contact between the electrolyte and measurement solution, even in difficult samples.

 


Технические характеристики - perfectION™ comb Pb Lemo Combination Electrode

Диапазон измерения 10-6 … 0,1 mol/L
0.2 … 20700 mg/L
Материал корпуса Epoxy
Температурный диапазон, °C 0 ... 80
Кабели и коннекторы 1.2 m cable; LEMO
Тип стекла мембраны Solid state
Оптимальный рН-диапазон 4 … 7
Электролит электрода сравнения Ion Electrolyte B
Номер заказа 51344830

Особенности и преимущества

     All combined ion-selective electrodes consist of a measuring electrode complete with an integrated reference. There is therefore no need for an additional reference electrode. 

  • Sensor with attached cable and LEMO connector 
  • Reference electrolyte (60 mL) 
  • Operating instructions 

     To ensure an unproblematic start to your ISE measurement, the required calibration standards and ISA solutions (Ionic Strength Adjuster) can be ordered at the same time.

Order information:

ISA-solution     5 mol/L NaClO4
Calibration standard 1000mg/L 51344780
Reference electrolyte Ion Electrolyte B 
51344751

DX262-NO3 Nitrate half-cell

ISE_trio_s_jpgISE DX series

     An electrode for determining nitrate concentration of samples such as fertiliser, water, meat and vegetables.

 

 

 


Технические характеристики - DX262-NO3 Nitrate half-cell

Материал корпуса POM / PVC
Температурный диапазон, °C 0 ... 50
Диапазон измерения 1.0 ... 1.0E-05 mol/L
Оптимальный рН-диапазон 2 ... 12
Номер заказа 51340800

Особенности и преимущества

     The rugged plastic shaft makes the nitrate electrode ideal for both field and laboratory applications.
The ion selective membrane is reinforced by a fine mesh for improved stability and longer life.

  • Rugged plastic shaft
  • Reinforced membrane

Nitrogen Oxide Electrode

ISE_trio_s_jpgGas Measurement

An electrode for determining the nitrogen oxide concentration of samples such as sewage and exhaust gases.

 

 

 


Технические характеристики - Nitrogen Oxide Electrode

Материал корпуса PPS
Температурный диапазон, °C 0 ... 50
Диапазон измерения 1.0E-02 … 1.0E-04 mol/L
Оптимальный рН-диапазон < 5
Interference SO2; CO2; H2S
Номер заказа 51341100

Особенности и преимущества

     A gas sensing electrode (GSE) consists of a pH electrode immersed in an electrolyte solution which is separated from the measuring solution by a gas sensitive membrane. The gas which has to be determined, diffuses through the membrane and changes the pH value of the electrolyte.
Concentrations of acid or alkaline gases can easily be determined in this way. The rugged plastic shaft makes the GSE ideal for both field and laboratory applications.

  • Rugged plastic shaft
  • Gas sensing membrane

DX239-K Potassium half-cell

ISE_trio_s_jpgISE DX series

     An electrode for determining potassium concentration of samples such as wine, soil, serum, fertiliser and infusions.

 

 

 


Технические характеристики - DX239-K Potassium half-cell

Материал корпуса POM / PVC
Температурный диапазон, °C 0 ... 50
Диапазон измерения 1.0 ... 1.0E-06 mol/L
Оптимальный рН-диапазон 2 ... 12
Номер заказа 51340700

Особенности и преимущества

     The rugged plastic shaft makes the potassium electrode ideal for both field and laboratory applications.
The ion selective membrane is reinforced by a fine mesh for improved stability and longer life.

  • Rugged plastic shaft
  • Reinforced membrane

DX223-Na Sodium half-cell

ISE_trio_s_jpgISE DX series

     An electrode for determining the sodium concentration of samples such as food, biological fluids and cooling water.

 

 

 


Технические характеристики - DX223-Na Sodium half-cell

Материал корпуса Glass
Температурный диапазон, °C 0 ... 80
Диапазон измерения 1.0 ... 1.0E-07 mol/L
Оптимальный рН-диапазон 8 ... 11
Номер заказа 51340263

Особенности и преимущества

     The sodium electrode has a similar construction to a normal pH electrode but uses membrane glass with a higher selectivity for sodium.
     The electrode has a fast response time and requires no maintenance.

  • Fast response
  • No maintenance

Ammonia Electrode

ISE_trio_s_jpg

Gas Measurement

     An electrode for determining the ammonia concentration of samples such as sewage and kjeldahl distillate.

 

 

 


Технические характеристики - Ammonia Electrode

Материал корпуса PPS
Температурный диапазон, °C 0 ... 50
Диапазон измерения 5.0E-02 ... 5.0E-06 mol/L
Оптимальный рН-диапазон > 11
Interference Volatile bases
Номер заказа 51341000

Особенности и преимущества

     A gas sensing electrode (GSE) consists of a pH electrode immersed in an electrolyte solution which is separated from the measuring solution by a gas sensitive membrane. The gas which has to be determined, diffuses through the membrane and changes the pH value of the electrolyte. Concentrations of acid or alkaline gases can easily be determined in this way.
      The rugged plastic shaft makes the GSE ideal for both field and laboratory applications.

  • Rugged plastic shaft
  • Gas sensing membrane

DX218-NH4 Ammonium half-cell

ISE_trio_s_jpgISE DX series

     An electrode for determining ammonium concentration of samples such as boiler feed water, food and fertiliser.

 

 

 


Технические характеристики - DX218-NH4 Ammonium half-cell

Материал корпуса POM / PVC
Температурный диапазон, °C 0 ... 50
Диапазон измерения 1.0 ... 1.0E-05 mol/L
Оптимальный рН-диапазон 2 ... 9
Номер заказа 51340900

Особенности и преимущества

    The rugged plastic shaft makes the ammonium electrode ideal for both field and laboratory applications.
The ion selective membrane is reinforced by a fine mesh for improved stability and longer life.

  • Rugged plastic shaft
  • Reinforced membrane

DX280-Br Bromide half-cell

ISE_trio_s_jpgISE DX series

An electrode for determining bromide concentration in samples such as photographic emulsions.

 

 

 


Технические характеристики - DX280-Br Bromide half-cell

Материал корпуса POM
Температурный диапазон, °C 0 ... 80
Диапазон измерения 1.0 ... 1.0E-06 mol/L
Оптимальный рН-диапазон 2 ... 13
Номер заказа 51340300

Особенности и преимущества

The robust solid state membrane and plastic shaft make the bromide electrode ideal for both field and laboratory applications.

  • Solid state membrane
  • Rugged plastic shaft

DX240-Ca Calcium half-cell

ISE_trio_s_jpgISE DX series

An electrode for determining calcium concentration of samples such as milk, serum and soil samples.

 

 

 


Технические характеристики - DX240-Ca Calcium half-cell

Материал корпуса POM / PVC
Температурный диапазон, °C 0 ... 50
Диапазон измерения 1.0 ... 1.0E-06 mol/L
Оптимальный рН-диапазон 2 ... 12
Номер заказа 51340600

Особенности и преимущества

     The rugged plastic shaft makes the calcium electrode ideal for both field and laboratory applications.
The ion selective membrane is reinforced by a fine mesh for improved stability and longer life.

  • Rugged plastic shaft
  • Reinforced membrane

Carbon Dioxide Electrode

ISE_trio_s_jpgGas Measurement

An electrode for determining the carbon dioxide concentration of samples such as sewage and kjeldahl distillate.

 

 

 


Технические характеристики - Carbon Dioxide Electrode

Материал корпуса PPS
Температурный диапазон, °C 0 ... 50
Диапазон измерения 5.0E-02… 5.0E-06 mol/L
Оптимальный рН-диапазон < 4.8
Interference SO2; NOX; H2S
Номер заказа 51341000, 51340038

Особенности и преимущества

     A gas sensing electrode (GSE) consists of a pH electrode immersed in an electrolyte solution which is separated from the measuring solution by a gas sensitive membrane. The gas which has to be determined, diffuses through the membrane and changes the pH value of the electrolyte. Concentrations of acid or alkaline gases can easily be determined in this way.
      The rugged plastic shaft makes the GSE electrode ideal for both field and laboratory applications.

  • Rugged plastic shaft
  • Gas sensing membrane

DX235-Cl Chloride half-cell

ISE_trio_s_jpgISE DX series

     An electrode for determining chloride concentrations in samples such as food, water, and building materials.

 

 

 


Технические характеристики - DX235-Cl Chloride half-cell

Материал корпуса POM
Температурный диапазон, °C 0 ... 80
Диапазон измерения 1.0 ... 1.0E-05 mol/L
Оптимальный рН-диапазон 2 ... 13
Номер заказа 51340400

Особенности и преимущества

The robust solid state membrane and plastic shaft make the fluoride electrode ideal for both field and laboratory applications.

  • Solid state membrane
  • Rugged plastic shaft

DX224-Mg Magnesium half-cell

ISE_trio_s_jpgISE DX series

     Each ion-selective electrode (ISE) and each membrane module is tested wet-chemically. It has to pass the stringent requirements of several direct measurements as well as a typical titration application. Each ISE is issued with its own serial number and quality certificate. There is no better quality assurance than this.

 

 

Технические характеристики -  DX224-Mg Magnesium half-cell

Материал корпуса POM / PVC
Температурный диапазон, °C 0 ... 50
Диапазон измерения 1.0 ... 1.0E-05 mol/L
Оптимальный рН-диапазон 4 ... 12
Номер заказа 51107684

Особенности и преимущества

Modular and versatile
     METTLER TOLEDO ion-selective half-cells consist of two elements: a universal shaft and an ion-specific membrane module. This module may be exchanged allowing you to measure the ion of your choice. Just order the membrane kit specific for that ion, mount the new module onto the shaft of your ISE half-cell, and you have a new ISE!

DX207-Li Lithium half-cell

ISE_trio_s_jpgISE DX series

     Each ion-selective electrode (ISE) and each membrane module is tested wet-chemically. It has to pass the stringent requirements of several direct measurements as well as a typical titration application. Each ISE is issued with its own serial number and quality certificate. There is no better quality assurance than this.

 

 

Технические характеристики - DX207-Li Lithium half-cell

Материал корпуса POM / PVC
Температурный диапазон, °C 0 ... 50
Диапазон измерения 1.0 ... 1.0E-05 mol/L
Оптимальный рН-диапазон 2 ... 12
Номер заказа 51107673

Особенности и преимущества

Modular and versatile
     METTLER TOLEDO ion-selective half-cells consist of two elements: a universal shaft and an ion-specific membrane module. This module may be exchanged allowing you to measure the ion of your choice. Just order the membrane kit specific for that ion, mount the new module onto the shaft of your ISE half-cell, and you have a new ISE!

DX226-CN Cyanide half-cell

ISE_trio_s_jpgISE DX series

     Each ion-selective electrode (ISE) and each membrane module is tested wet-chemically. It has to pass the stringent requirements of several direct measurements as well as a typical titration application. Each ISE is issued with its own serial number and quality certificate. There is no better quality assurance than this.

 

 

Технические характеристики - DX226-CN Cyanide half-cell

Материал корпуса POM
Температурный диапазон, °C 0 ... 80
Диапазон измерения 1.0 ... 1.0E-05 mol/L
Оптимальный рН-диапазон 4 ... 13
Номер заказа 51107681

Особенности и преимущества

Modular and versatile
     METTLER TOLEDO ion-selective half-cells consist of two elements: a universal shaft and an ion-specific membrane module. This module may be exchanged allowing you to measure the ion of your choice. Just order the membrane kit specific for that ion, mount the new module onto the shaft of your ISE half-cell, and you have a new ISE!

DX232-S Sulfide half-cell

ISE_trio_s_jpgISE DX series

     Each ion-selective electrode (ISE) and each membrane module is tested wet-chemically. It has to pass the stringent requirements of several direct measurements as well as a typical titration application. Each ISE is issued with its own serial number and quality certificate. There is no better quality assurance than this.

 

 

Технические характеристики - DX232-S Sulfide half-cell

Материал корпуса POM
Температурный диапазон, °C 0 ... 80
Диапазон измерения 1.0 ... 1.0E-06 mol/L
Оптимальный рН-диапазон 4 ... 13
Номер заказа 51107675

Особенности и преимущества

Modular and versatile
     METTLER TOLEDO ion-selective half-cells consist of two elements: a universal shaft and an ion-specific membrane module. This module may be exchanged allowing you to measure the ion of your choice. Just order the membrane kit specific for that ion, mount the new module onto the shaft of your ISE half-cell, and you have a new ISE!

DX258-SCN Thiocyanate half-cell

ISE_trio_s_jpgISE DX series

     Each ion-selective electrode (ISE) and each membrane module is tested wet-chemically. It has to pass the stringent requirements of several direct measurements as well as a typical titration application. Each ISE is issued with its own serial number and quality certificate. There is no better quality assurance than this.

 

 

Технические характеристики - DX258-SCN Thiocyanate half-cell

Материал корпуса POM
Температурный диапазон, °C 0 ... 80
Диапазон измерения 1.0 ... 1.0E-05 mol/L
Оптимальный рН-диапазон 2 ... 10
Номер заказа 51107870

Особенности и преимущества

Modular and versatile
     METTLER TOLEDO ion-selective half-cells consist of two elements: a universal shaft and an ion-specific membrane module. This module may be exchanged allowing you to measure the ion of your choice. Just order the membrane kit specific for that ion, mount the new module onto the shaft of your ISE half-cell, and you have a new ISE!

DX264-Cu Copper half-cell

ISE_trio_s_jpgISE DX series

     Each ion-selective electrode (ISE) and each membrane module is tested wet-chemically. It has to pass the stringent requirements of several direct measurements as well as a typical titration application. Each ISE is issued with its own serial number and quality certificate. There is no better quality assurance than this.

 

 

Технические характеристики - DX264-Cu Copper half-cell

Материал корпуса POM
Температурный диапазон, °C 0 ... 80
Диапазон измерения 1.0 ... 1.0E-05 mol/L
Оптимальный рН-диапазон 2 ... 8
Номер заказа 51107678

Особенности и преимущества

Modular and versatile
     METTLER TOLEDO ion-selective half-cells consist of two elements: a universal shaft and an ion-specific membrane module. This module may be exchanged allowing you to measure the ion of your choice. Just order the membrane kit specific for that ion, mount the new module onto the shaft of your ISE half-cell, and you have a new ISE!

DX287-BF4 Fluoroborate half-cell

ISE_trio_s_jpgISE DX series

     Each ion-selective electrode (ISE) and each membrane module is tested wet-chemically. It has to pass the stringent requirements of several direct measurements as well as a typical titration application. Each ISE is issued with its own serial number and quality certificate. There is no better quality assurance than this.

 

 

Технические характеристики - DX287-BF4 Fluoroborate half-cell

Материал корпуса POM / PVC
Температурный диапазон, °C 0 ... 50
Диапазон измерения 1.0 ... 1.0E-06 mol/L
Оптимальный рН-диапазон 2 ... 12
Номер заказа 51107676

Особенности и преимущества

Modular and versatile
     METTLER TOLEDO ion-selective half-cells consist of two elements: a universal shaft and an ion-specific membrane module. This module may be exchanged allowing you to measure the ion of your choice. Just order the membrane kit specific for that ion, mount the new module onto the shaft of your ISE half-cell, and you have a new ISE!

DX312-Cd Cadmium half-cell

ISE_trio_s_jpgISE DX series

     Each ion-selective electrode (ISE) and each membrane module is tested wet-chemically. It has to pass the stringent requirements of several direct measurements as well as a typical titration application. Each ISE is issued with its own serial number and quality certificate. There is no better quality assurance than this.

 

 

Технические характеристики - DX312-Cd Cadmium half-cell

Материал корпуса POM / PVC
Температурный диапазон, °C 0 ... 50
Диапазон измерения 1.0 ... 1.0E-05 mol/L
Оптимальный рН-диапазон 2 ... 8
Номер заказа 51107672

Особенности и преимущества

Modular and versatile
     METTLER TOLEDO ion-selective half-cells consist of two elements: a universal shaft and an ion-specific membrane module. This module may be exchanged allowing you to measure the ion of your choice. Just order the membrane kit specific for that ion, mount the new module onto the shaft of your ISE half-cell, and you have a new ISE!

DX327-I Iodide half-cell

ISE_trio_s_jpgISE DX series

     Each ion-selective electrode (ISE) and each membrane module is tested wet-chemically. It has to pass the stringent requirements of several direct measurements as well as a typical titration application. Each ISE is issued with its own serial number and quality certificate. There is no better quality assurance than this.

 

 

Технические характеристики - DX327-I Iodide half-cell

Материал корпуса POM
Температурный диапазон, °C 0 ... 80
Диапазон измерения 1.0 ... 1.0E-06 mol/L
Оптимальный рН-диапазон 1 ... 13
Номер заказа 51107680

Особенности и преимущества

Modular and versatile
    METTLER TOLEDO ion-selective half-cells consist of two elements: a universal shaft and an ion-specific membrane module. This module may be exchanged allowing you to measure the ion of your choice. Just order the membrane kit specific for that ion, mount the new module onto the shaft of your ISE half-cell, and you have a new ISE!

DX337-Ba Barium half-cell

ISE_trio_s_jpgISE DX series

     Each ion-selective electrode (ISE) and each membrane module is tested wet-chemically. It has to pass the stringent requirements of several direct measurements as well as a typical titration application. Each ISE is issued with its own serial number and quality certificate. There is no better quality assurance than this.

 

 

Технические характеристики - DX337-Ba Barium half-cell

Материал корпуса POM / PVC
Температурный диапазон, °C 0 ... 50
Диапазон измерения 1.0 ... 1.0E-05 mol/L
Оптимальный рН-диапазон 2 ... 12
Номер заказа 51107674

Особенности и преимущества

Modular and versatile
     METTLER TOLEDO ion-selective half-cells consist of two elements: a universal shaft and an ion-specific membrane module. This module may be exchanged allowing you to measure the ion of your choice. Just order the membrane kit specific for that ion, mount the new module onto the shaft of your ISE half-cell, and you have a new ISE!

DX407-Pb Lead half-cell

ISE_trio_s_jpgISE DX series

     Each ion-selective electrode (ISE) and each membrane module is tested wet-chemically. It has to pass the stringent requirements of several direct measurements as well as a typical titration application. Each ISE is issued with its own serial number and quality certificate. There is no better quality assurance than this.

 

 

Технические характеристики - DX407-Pb Lead half-cell

Материал корпуса POM / PVC
Температурный диапазон, °C 0 ... 50
Диапазон измерения 1.0 ... 1.0E-05 mol/L
Оптимальный рН-диапазон 2 ... 8
Номер заказа 51107873

Особенности и преимущества

Modular and versatile
     METTLER TOLEDO ion-selective half-cells consist of two elements: a universal shaft and an ion-specific membrane module. This module may be exchanged allowing you to measure the ion of your choice. Just order the membrane kit specific for that ion, mount the new module onto the shaft of your ISE half-cell, and you have a new ISE!